SMS:2D Mesh Module Menus: Difference between revisions

Revision as of 20:12, 30 October 2012

The following menus are available in the 2D Mesh Module:

See Menu Bar for more information.

In addition to the standard right click menu items (Project Explorer) the following menu item appears:

Create Mesh Quality Scatter Set – This command creates a scatter set consisting of one vertex at the center of each element in the mesh. Six data sets are created for this scatter set including the six quality measures defined in the ARR quality plot. These data sets range from 0.0 to 1.0. The higher the value, the higher the quality of the element. (If SMS supported element centered data sets, these quantities could be displayed directly on the mesh.) The creation of this scatter set gives the user a spatial feeling for quality of the mesh.

Modules: Mesh Module · Cartesian Grid Module · Scatter Module · Map Module · GIS Module · Particle Module
Models: ADCIRC · BOUSS-2D · CGWAVE · CMS-Flow · CMS-Wave · FESWMS · FVCOM · Generic Mesh Model · GENESIS · HYDRO AS-2D · PTM · SRH-2D · Steering · STWAVE · TABS · TUFLOW

@@ Line 9: / Line 9: @@
 * [[SMS:2D Mesh Nodestrings Menu|Nodestrings]]
 * [[SMS:2D Mesh Elements Menu|Elements]]
+==Right Click Menu==
+In addition to the standard right click menu items ([[SMS:Project Explorer|Project Explorer]]) the following menu item appears:
+* '''Create Mesh Quality Scatter Set''' &ndash; This command creates a scatter set consisting of one vertex at the center of each element in the mesh.  Six data sets are created for this scatter set including the six quality measures defined in the [[SMS:ARR Mesh Quality Assessment Plot|ARR quality plot]].  These data sets range from 0.0 to 1.0.  The higher the value, the higher the quality of the element. (If SMS supported element centered data sets, these quantities could be displayed directly on the mesh.)  The creation of this scatter set gives the user a spatial feeling for quality of the mesh.
 ==Model Specific Menus==