SMS:Managing Cross Sections

1D River Module
1D River Module 1D River Module Menus Interpolate Cross Sections
Aquaveo

For the new 1D Hydraulic Cross Section coverage, the cross section geometry is stored in text database file on disk. When extracting cross sections they are saved to a new (or existing) database file. This database was the basis for the development of the cross section data in the ArcHydro data model. Cross sections in the database can be used for the development of hydraulic models such as HEC-RAS.

The Manage Cross Sections command allows you to create a new database or open an existing database to add geometries, edit existing ones, and provide proper geo-referencing information. It is also possible to open a cross section database using the Open command from the File menu.

Cross Section Database Definition

When setting up a new database the following attributes can be defined:

• Topo ID – a topographic identifier and description that identifies where the cross section database was derived from. You should create a new Topo ID for each database.
• Line Prop Types – By default WMS uses only a Material ID, but other properties could be defined for general use (they will not immediately be used by supported hydraulic models).
• Point Prop Types – By default WMS uses thalweg, left bank, and right bank but other point properties could be defined for general use.

The cross section database management dialog also allows you to create a new cross section, edit/copy/delete an existing cross section, insert an entire database (merge databases together), convert a cross section database to a coverage (of course the georeferencing of cross sections must be provided for the cross section to be included in the coverage), create a digital terrain model from the cross section geometry, and converting the coverage to line properties.

Related Topics

• 1D River Module Tools