Revision as of 17:15, 9 November 2021

The SMS Intermediate Release Bugfixes page for released versions of SMS:

SMS 13.1 Release Bugfixes

SMS 13.1.14 - September 15, 2021

Datasets

13279 Dataset calculator for max gives unhelpful error message for mismatched timesteps

Mesh

13276 The Existing Nodes meshing option brings up an error when used.
13269 SMS crashes when interpolating Mesh to a Scatter with no datasets.

Raster

13249 Cannot get elevation data out of rasters when converting to a mesh.

Save

13242 SMS crashes when saving after importing the NST files.

SRH-2D

13238 Monitoring Line Simulation Plot confuses results when there are multiple simulations in the project.

SMS 13.1.13 - August 24, 2021

Datasets

13218 SMS gets confused about which dataset is active causing the contours to not update.
13114 Incorrect bridge scour computed values that are too high.

Display Options

13178 Turn on the fill display option for polygons causes SMS to stall for a few seconds.

Mesh

13203 Selection status at bottom of screen does not update as expected when addition elements are selected.
13215 Elevation (Z) dataset cannot be renamed. There is no Rename command available.

Online Maps

12730 Floodplain missing flood extent arcs.

Opening File

13202 Issues importing CDIP file from CDIP website into spectral coverage.

Plots

13183 Time series plot legend does not update, and the settings do not save. Remains at default settings.

Projection

13177 Reprojecting all corrupts certain coverages.
13179 Horizontal projection questions/issues where new coverages are in local projections instead of global, points can't be edited, and redistribution is not working.

Quadtree

13152 Quadtree dataset specific data options are lost when saving the project.

Raster

13168 Trimmed raster name doesn't change in the Graphics Window legend; it keeps the name of the original raster.
11912 Raster in "*.grd" format not displaying in Graphics Window.

Scatter Data

13204 Selection of many triangles in scatter set is very slow when the same operation in the mesh or UGrid modules is not.
13188 Breaklines not forced properly into scatter set when there are duplicate nodes.

SRH-2D

13220 Summary Report simulation section includes links back to the various coverages that were applied to that simulation. The mesh used appears to also try to link back, but there is nothing in between the quote marks where the mesh name should be.
13219 Report Summary doesn't recognize simulation has results and so does not include them in the report.
13216 SRH-2D Post detects pressure flow when no pressure flow should be present.
13189 Can't delete SRH Sediment Layers in the Material List and Properties dialog.

STWAVE

13196 Full-Plane Simulation shift in results when loaded into SMS.
13105 Vectors orientation is wrong on solution for STWave Full plane mode simulation.

UGrid

13205 Converting a scatter set to a UGrid creates invalid cells.
13206 The Select Cells tool does not have a "Invert Selection" option for cells in the UGrid module.

SMS 13.1.12 - July 02, 2021

CMS-Flow

13154 Saving CMS-Flow simulation fails and brings up a python script error.
13158 CMS-Flow boundary condition arc are labeled with double text.
13137 When exporting, there is not a model check or export warnings for broken file references.
13119 CMS-Flow BC file paths saves to temp directory instead of correct project directory.
13121 CMS-Flow dataset selector gets filtered prematurely when using folders, placing datasets in the wrong location in the Project Explorer.
13123 Loading and saving CMS-Flow project files can be very slow.

Coverage

13116 Selected arcs display differently when using the Select All command vs. dragging a box selection.
13094 When extracting features, channel extractor prefers secondary (overflow) channels over main channel.
13093 Feature extraction from raster fails and causes bank arcs to cross each other.

Feature Object

13115 Shapefile not being converted correctly to feature objects. The new feature objects are not completely matching the original shapefile objects.

GenCade

11563 Using GenCade Model Control clears INIFILE value when it should not.

Raster

13143 Display Options, specifically the contour method, don't stay constant when trimming a raster.

Save

13107 Default name for "Save as package..." not set in the dialog.

SRH-2D

13148 Python process id dialog appears when opening the Advanced SRH-2D Simulation dialog.

TOPAZ

13138 Error message appears when running TOPAZ on network drives.

SMS 13.1.11 - June 07, 2021

ADCIRC

13066 Exporting ADCIRC simulation with missing files, such as a missing hot start file, should give a warning.
13037 ADCIRC grd file fails to import.

CMS Flow

13061 Incorrect vector values for CMS Wind dataset where the Vx is correct but the Vy is not.
13041 In the CMCARDS, project has strange collapsed rows going through it.
12976 CMS-Flow simulation takes several minutes to export, then gives errors related to python script for BC snapping.

Coverage

13040 Aligning a contour to an elevation moves points to the wrong place.

Datasets

13032 Error retrieving scalar data from solution file when there is no matching geometry.
13050 Elevations not populating when using Channel Calculator.

Plots

13051 3D bridge swapping the upstream and downstream profiles.

Project Explorer

13031 Error messages cut off full file path in dialog and there is not a way to resize the window to see the full path.

Projection

12963 Reproject all command should set projections for floating objects.

Quadtree

13062 Resampling time steps of vector dataset on quadtree grid produced incorrect values.
13059 Dataset Properties not showing correct time step for all datasets.

Raster

13033 Datasets to Rasters tool not functioning.

Save

13053 Unable to convert file path to relative when saving project with a CMS-Flow simulation.

Scatter Data

13017 Triangles in the scatter module won't swap due to tolerance.

SRH-2D

13065 Can't access SRH-2D Boundary Condition dialog where arcs associated with a structure have been split.
13055 SRH2D migration issues where not simulation data is preserved when opening an older SRh-2D model project.
13027 Sediment table gets confused when there are more than 9 grain sizes.
13036 Exporting SHR-2D Material file to a polygon shapefile does not assign correct properties to the shapefile.
13019 Solution folder duplicate command doesn't organize the duplicate datasets correctly, causing the datasets to be assigned to the wrong parent.

SMS 13.1.10 - April 26, 2021

ADCIRC

12933 The tidal constituent parameters written to the fort.15 (ADCIRC control) file need to have matched precision.

CGrid

12894 Map elevation on Cgrids causes reference time information to be lost when swapping datasets.

CMS Flow

12976 CMS-Flow simulation takes several minutes to export, then gives errors related to python script for BC snapping.
12989 CMS-Flow model native import issues causing invalid quadtree cells and arcs.
13014 CMS-Flow Arc Boundary Condition file paths not preserved causing the files to not open through SMS.
13012 Can't specify initial conditions file for CMS-Flow simulation.
12976 CMS-Flow simulation takes several minutes to export, then gives errors related to python script for BC snapping.
12954 CMS-Flow boundary from ADCIRC issues where BC file is exported with the wrong BC format.
12922 CMS-Flow boundary conditions written missing entered time series data.

Coverage

12966 Arcs in Bridge Scour Coverage not displaying in the Graphics Window.
12965 Converting a polygon shapefile to SRH-2D materials coverage does not assign polygon attribute.
12968 Inserting an ADCIRC Levee in an EWN coverage corrupts the EWN coverage.
12923 CMS-Flow Boundary Conditions in version 13.0 not migrating to 13.1 correctly causing the boundary conditions to be empty.
12913 3D Bridge to UGrid saves in the component directory by default.

Datasets

12955 Precision of Properties dialog not sufficient for many datasets, showing only values to 2 digit precision.
12906 Datasets in solution folder not converted correctly when using the duplicate and Convert to Scatter commands.
12892 Dataset Properties are incomplete. Missing reference time, min/max etc for the current time step and all timesteps as well as range, Mean, Std Dev, etc....

Installer

12881 Installation of SMS *13.1 does not create desktop shortcut.

Mesh

12967 Mesh created by the EWN Insert Features operation does not have a projection.
12950 Mesh Element selection is incorrect after clicking the Save command, with some elements being deselected.
12924 Hydro-AS mesh gets corrupted when imported causing the elements to be scrambled.
12901 The "Look at point" for rotation (center of rotation) not computed correctly.
12880 Force Breakline in mesh doesn't give correct results, selected random points instead of the correct location.
12927 2D Mesh vector display options do not stay consistent when switching between meshes.
12931 Crash when clicking Force Breaklines command twice.

Opening File

13010 Reading currupt projects process needs to be changed to keep SMS from crashing or freezing.

Plots

12914 User can select 3D Ugrids to try to extract observation profiles even though this is not supported at this time.

Preferences

12908 Restore Factory settings should remove PlotDefaults.ini along with restoring defaults.
12940 Right-click Time Preferences does not open Time tab in the Preferences dialog.
12897 Missing notice to notify user SMS requires restart to apply icon size changes.

Projection

12963 Reproject all should set projection for floating objects instead of ignoring them.
12962 Object projections set to fully floating (no projection with no units) when reading an ".srhhydro" file.
12911 Gauss-Kruger projection causes points to shift 1.6-1.7 meters.

Raster

12916 Dataset to raster tool not working. Gives a script error instead of generating the raster.
12930 Crash converting raster to scatter when using a large raster.

RMA2

12688 Error given when trying to run RMA2: "Error running GFGEN. Cannot continue to RMA2."

Save

13002 Advanced simulation tools will cause the project to not save.
12944 Unnecessary prompt to save when using the New command and there is nothing to save.
12953 Datasets for CMS-Flow Quadtrees are not being saved in the projname_datasets folder or restored.
12960 EWN Project save as does not work: no components or datasets are created during the save.

SRH-2D

12975 Model Checker does not detect Monitor Point issue when monitor point is outside of the mesh.
12977 SRH-2D Error of missing sediment transport file during the simulation run even though the file is present and available.
12973 Element not snapped to material when exporting an SRH-2D simulation.
12958 Structure Output Plot shows no solution even when solutions have been loaded into the project.
12961 Monitor Line Plots not accessible using “Monitor Line Plots…” right-click menu item for monitor line arc as the command is missing.
12969 Print the SRH simulation path to the output dialog when saving SRH simulation files. Feature request.
12934 Can't run SRH-2D simulation with many monitor points. Could not run an SRH-2D simulation with more than 14 monitor points.
12904 Selecting Advanced Simulation (Beta)... does nothing instead of opening the Advanded Simulation dialog.
12925 SRH-2D solution won't load as a solution. Trying to load a solution causes SMS to process for a bit, then load nothing.
12907 SRH-2D Turbulence parameter can be assigned bogus values. Should be limited to a value range of 0.01 to 1.0.
12926 SRH material export not writing the *.srhmat file correctly as it included materials that do not have assigned elements.
12909 Save All Simulations and Run command works but gives the user a pop up message with no message.

STWAVE

12895 STWAVE solutions are swapped (left to right) when read in causing the solution to display incorrectly.
12890 STWAVE cell size precision is too high caused by a mismatch between the dep.in file and the sim file.
12891 STWAVE depth not loaded in transient depth case. The depth and time steps failed to load.

SMS 13.1.5 beta - December 1, 2020

CMS-Flow

12190 CMS datasets not read correctly, resulting in SMS displaying the datasets incorrectly.
12697 Importing CMS-Flow CMCARDS or TEL files creates Quadtrees/UGrids with inverted Z values.
12539 Time series plot of CMS-Flow has odd behavior including: appearing flat when it should not be flat, portions being blank, and not showing the entire range.

Contours

12542 Problem automatically determining contour label spacing causing contour labels to not show up when automatic labels are turned on.

Coverage

12637 BC Data lines do not show up in snap preview mode.
12641 Channel calculator not updating the dataset name and not updating the plot.
12607 Channel Calculator doesn't update SRH BC definition if there are existing curve values.
12614 Newly created coverages including extracted features are not placed correctly in the Project Explorer.
12602 Synthetic Storms Coverage is missing when should be available for paid licenses.

Datasets

12695 Dataset time reference is not maintained through interpolation resulting in no reference time being used.
12665 Data calculator gives wrong answers for Quadtree where the time steps and data ranges are wrong.
12666 Dataset toolbox "ave" function doesn't work on Vy datasets.
12667 Dataset toolbox doesn't recognize dataset because of inconsistent handling of variable names.
12658 Converting CMS-Flow Solution "vector" datasets to scalar has the values aligned to the local space instead of the global space.
12657 Vector datasets loaded from dataset file are not aligned correctly.

Display Options

12659 UGrid vector displays don't update when using the zoom or pan tools.
12649 Vector colors do not vary when the length option is "Fixed length".

Feature Objects

12707 Default for extracting banks of a channel or toes of an embankment should be "Closest to previous" instead of "Closest to centerline".
12705 Coverages generated by feature extraction have wrong vertical projection.
12698 Redistribute vertices gets bad data where the vertices are far too course.
12613 Feature extraction has the OK button dimmed when the it should not be dimmed.
12589 SRH BC labels z location is off from where the points are displayed.
12584 Copy/paste does not work in levee attribute dialog of ADCIRC BC coverage.
12562 ADCIRC Levee BC table cannot be edited using the Assign BC command.

General

12566 Term of "Bathymetry" for polygon attributes is confusing and should be "Elevation (terrain & bathymetry) source" instead.

Import

12670 Inactive cells (based on "Z" dataset) are not set correctly importing from CMS-Flow and are being displayed when they should not.

Mesh

12570 Inserting nodes into a geographic mesh does not update the neighbor element's ID as it should.
12571 Specified duplicate node tolerance not being applied correctly when inserting new nodes in a mesh, allowing nodes to places outside the tolerance level.
12569 Inserting nodes into a mesh on either side of a levee gap gets the boundary confused and SMS won't insert the node.

Opening Files

12646 KMZ file does not load as expected when asked to convert it to a shapefile. The conversion does not happen and the file fails to load.
12635 Problem with datasets and plots not opening with the SRH-2D project in SMS. Displays an error message that the files cannot be found.
12591 Loading a mesh from *.h5 file is 5x slower than loading it from a *.2dm file. The *.h5 file should open faster than the *.2dm file.
12564 Double-clicking on "*.sms" file hangs or crashes instead of opening in SMS when the file type has already been specified to be opened with SMS.
12595 JSONDecodeError when opening older SRH-2D projects.

Plots

12710 Loading a project results in plot finding in no active dataset for the mesh module.

Preferences

12598 SMS is not using the user specified temp directory override set in the Preferences dialog.

Project Explorer

12565 Project explorer tree behaves inconsistently in displaying the entries.

Projection

12615 Raster Projections are missing a "vertical" component causing a block when setting a projection.

Quadtree

12561 Cell edges permanently displayed on Quadtree grids.
12723 Crash after converting Quadtree to 2D Scatter.
12655 Mapping a new dataset to the elevation for a quadtree destroys the source dataset.
12510 Splitting/Merging cells of quadtree messes up datasets attached to the quadtree.

Raster

12626 DEM converted from a LiDAR has holes in the data.
12627 Merged TIF raster has bad values causing messed up data ranges.

RMA2

12696 New TABS executables won't launch from SMS.

Save

12616 Saving a project as a package incorrectly lists the package file in current working directory and recent files list.
12625 Folders and tree order in the GIS Data section of the Project Explorer tree are not maintained when the project is saved.
12629 Save as Package results in project name change when it should retain the original project name.

Scatter Data

12694 SMS crashes when deleting scatter points.

SRH-2D

12719 Report generation gives warnings for projection even though projection is valid. Fails when reprojected as well.
12701 Floodway tools in 13.1 not complete with missing unit q method, computation commands, etc.
12704 Summary report fails showing a script error when first launched.
12645 Copy from model run queue to the command line window doesn't work.
12653 Snapping of internal BC (Pressure zone) is wrong with the snap being misaligned.
12677 SRH PEST bug where PEST fails immediately when trying to run it.
12633 SRH Snap preview will always frame when used.
12590 SRH2D: Solution sets remain when geometry is changed or deleted. Solution sets are specific to geometry and should be deleted if the geometry is changed.
12600 Y axis label is incorrect for the Net Q plot for SRH-2D, stating an error.
12599 Garbage RST files are left behind after a simulation runs. These RST files should be deleted when loading the solution.
12593 Unable to run SRH-2D. SRH-2D fails immediately after the pre-processor runs.
12586 Problem snapping structures where HY-8 structures are not either missing or snapping to a smaller number of nodes than they should.

UGrid

12592 Converting a mesh to a ugrid does not convert the nodestrings.

SMS 13.1.2 beta - September 20, 2020

Datasets

12451 Dataset toolbox for a mesh asks for location of the new dataset (nodes vs cells) even though the mesh does not support cell based datasets.
12454 Dataset toolbox crash for some projects.
12453 Some datasets are not shown in summary table.

SRH-2D

12457 Import shapefile for SRH-2D material coverage not mapping correctly.
12448 Important model paths for model executables are not set in Preferences.

Vectors

12424 The filtering of displayed vector arrows based on magnitude range is not working.

SMS 13.1.1 beta - August 6, 2020

ADCIRC

12421 Unable to run the ADCIRC Model Checker. An error appears when trying to run the model checker.

Coverage

11451 Change All command for Arc BC display options not useful and should be removed.

Display Options

12439 Inactive coverage displaying on mesh after model native import causing the display to change when it should not.

Plots

12396 Observation profile plot has an unexpected gap.

Quadtree

12441 Old CMS-Flow import does not create geometry and displays error that there are too many layers.
12440 Depths ↔ elevations transform does not change Cell Z value for quadtrees.

SRH-2D

12418 Arc labels not re-projected after display projection changed.
12444 SRH sediment transport data migration issues including changing the active thickness and thickness units.
12433 Migration of an SRH-2D project from 13.0 project creates invalid Node ID.
12420 When importing SRH-2D with a restart file, the RST file does not come through.

SMS 13.1.0 beta - June 21, 2020

Initial Release!!

SMS 13.0 Release Bugfixes

SMS 13.0.14 - June 24, 2020

Coverage

12336 Feature stamp gives meaningless "void in breakline" message and doesn't create stamp.

Datasets

12369 Scatter set interpolated onto a quad tree grid creates a point dataset not a cell dataset.
12368 Quadtree x location and y location should be on cells icon not on points icon in the Project Explorer.
12365 Incorrect vector values when converting vector sets to scalar.
12399 Unable to convert a Quadtree cell dataset to a node dataset.

Export

12375 Bridge Scour Crash. SMS crashes when attempting to View Values or Export Hydraulic Toolbox File for the Bridge Scour coverage.

Interpolation

12407 Vector values not interpolated from scatter set to mesh.

Opening File

12360 Crash importing some CMS models.
12390 Loading *.grd file crashes SMS 13.0.

Projection

11976 Projection that appears valid does not work with Layout tool.

Quadtree

12364 Vector Values for selected cells not displayed.

SRH-2D

11596 Monitor Line snapping (internal) gets confused when the line follows the mesh boundary.

Summary Table

12307 Erroneous values in Summary Table. Some of the reaches show 'NaN' when there should be flow, and the Hydraulic Radius is unreasonably large.

SMS 13.0.13 - April 29, 2020

Coverage

12277 Crash occurs when using the Convert | Stamp Features command on a Feature Stamping coverage.

Datasets

12284 SMS hangs when using source arc redistribution with cubic spline.

Feature Object

12228 Exterior snapping counts the corner cell twice.

Generic Model

12254 ALOS Global Digital Surface Model Data not recognized in XMS.

Opening File

12255 Merging image tiles for some raster file types ends up failing with an unrecognized elevation.

Quadtree

12263 Lighting Display Options do not show up for the Quadtree module.
12192 No volume value found in Status bar for the Quadtree module.

Raster

12258 Smoothing Raster converts static raster to dynamic when there are data gaps. A section of 'no data' in the raster appears to cause issues when smoothing the raster. Although all XMS softwares include the no data area when the raster is smoothed, which messes up the contours, only SMS then displays the raster as if it were dynamic. Since it's a GIS layer, the contours cannot be adjusted to truncate the range to correct the display manually.

XY Series Editor

12193 The Xy series editor cuts off the vertical label initially when using an empty dataset.

SMS 13.0.12 - January 31, 2020

CAD

12094 Delete CAD Prompt is out of place. Happening when closing a project, even when no CAD data is present.

Coverage

12163 Map to Mesh Extrapolation only gives null values. Mesh generator properties set to use IDW for Extrapolation from a Scatter set bathymetry source only give null values. When directly "interpolating" from the same scatter to the mesh once created, the values are as expected from IDW. Even though large amount of extrapolation, such as in this case, may be unwise, it is still expected that SMS would honor the extrapolation method specified.
12173 Some Bridge Scour generated arcs are not properly geolocated.

DMI

12164 ADCIRC Model Checker flags errors but model runs without any errors.

Export

12123 Exported shapefile values are invalid. When mesh contours are exported from SMS, the values in the attribute table are not accurate. For example, some of the values are larger than the original dataset's maximum across all time steps. The minimum/average/maximum values are also constant for some of the exported polygons, even though the nodes those polygons intersect have different values.

Feature Objects

12117 "Constant Paving" attribute not saved when the project is saved and closed.

Grid

12131, 12121 Crash when using the Create Cartesian Grid tool in the Cartesian Grid module.
11503 Crash opening project and performing the Map→2D Grid command.

HY-8

12090 Including HY-8 slows down SRH simulations beyond what is expected.

Import

12178 Can't open images from directories with unusual characters such as ä ö ü Ä Ö Ü. The image appears to load, but it is not visible in SMS.

Lidar

12134 SMS crashes when importing a LiDAR file created by merging two or more LiDAR files.

Mesh

12138 Only one constant value for the bathymetry polygon attribute honored when mapping Mesh Generator coverage.
12116 Meshing attributes from the 2D Mesh Polygon Attributes dialog are not saved with project when "Constant Paving" is selected.

Opening File

12119 When opening a project containing a TIF image, a prompt appears asking for the TIF to be unnecessarily converted to a geoTIFF.

Raster

12124 Converting a raster to a flood depth raster crashes SMS.

Scatter Data

12153 Removing duplicate points distorts breaklines on FHWA machines. When working with a scatter set with several duplicate points, by removing the duplicate points lines shoot out from the model, far outside of the project's bounds. Only replicates on the FHWA machines.

SRH-2D

11942 SRH Project won't open in SMS 13.0 when there are errors with online images, mismatched datasets, and voids in the mesh.
12095 SRH solution can be loaded into a project where the geometry (mesh) has been changed or edited. A warning should appear instead.

STWAVE

12087 STWAVE angle appears to be off by 90 degrees when compared to the wave height by direction output dataset.

XY Series

12089 The XY Series Editor does not allow for an empty data frame.

SMS 13.0.11 - November 11, 2019

Interpolation

12026 Raster elevation not referenced when creating a mesh. The raster is selected in the 2D Mesh Polygon Properties, but after converting the map to a 2D mesh the elevation is zero. Interpolating the raster to the mesh generates the correct elevations.

Map

11816 Node elevations not mapped for offset arcs.

Menu

11852 Exit-H 'Populate' button appears unresponsive with certain datasets where there is no elevation data under the arc.

Mesh

12020 Selected elements, when duplicating a mesh, cause selection anomalies. Only elements outside the polygon are selected. The elements that were selected when the mesh was duplicated can't be selected.
12015 If boundary condition arcs for the inflow and outflow BC are too far into the mesh, Snap Preview crashes SMS.
11715 Assigning a new elevation dataset for a mesh deletes the previous elevation dataset. Should only update the values in the current Z dataset.

Model Control

11997 CMS-Flow Sediment Transport Conflict between Model Control and Model Check. When the nonequilibrium formulation is selected, adaptation, size classes, and bed composition are visible. After switching to either of the equilibrium formulations, these are hidden. However, the model check still throws a warning regarding the missing size class information.

Online Maps

11230 In the Virtual Earth Map Locator Tool, the "Show Navigation Tools" option is not working.

Opening File

12046 Sample TIF loads in SMS 12.3.5 but not in 13.0.10. TIF file had a different projection than what was set in SMS.
12037 Can't read LandXML files.

Plots

12060 Plot line style changes not being implemented in the plot after setting them in plot display options on the style tab.
11837 Start time field not populated properly in step 2 of Film Loop Setup. Not allowing user to specify a starting time when generating the flow trace with the default simulation run (full length) set.
12049 Observation profile arc does not work when plotted along a Cartesian Grid geometry. Plot is not generated.
12022 Plot settings reset to default when they should not be. Occurs when changing the setting then generating an animation. Reset to default after the animation run.
12013 Observation plot line color resets after changing plotted time step. Occurs when changing the plot line color in the plot, then going back into plot data to change the time step.

Preferences

12002 Observation profile of arc that goes through holes in mesh doesn't find all "gaps".

Projection

11988 MPI executable option missing from Preferences dialog.

Spectral Data

12064 Generate Contour Breaklines creates nonsensical breaklines. The command has been removed.

SRH-2D

11978 SMS crashes when a point in a spectral coverage is moved. SMS should allow you to move the point in the spectral coverage without closing.
12029 SRH obstructions dialog contains misleading punctuation. A line in the Obstructions dialog box contains a colon that confused at least one end user.
12024 SRH-Post fails because the monitor coverage was not restored when reading the model native files.
11979 SRH not representing internal links correctly. Values are off from what is being monitored.
12019 INLET-SC BC not written correctly to srhhydro file.
11871 SRH Model Check Processing Script Error. Occurs when a poorly designed mesh is included in the simulation.

STWAVE

12088 Active coverage isn't really active. The active Spectral coverage isn’t really active until activating a different coverage and then clicking back on the Spectral coverage to make it active again.

Tutorial

12082 Stamped Feature Endcap spreadsheet is missing a row to enter data.
11937 Tutorial Review: STWAVE Nesting Files Will Not Open. When attempting to load a STWAVE nesting file, an error message appears.

Vectors

12085 Vector arrow location at 'Center' sometimes causes crash.

Feature Objects

11971 Feature Stamping with Overlapping Channels Crashes SMS. When stamping features on a scatterset, overlapping items in a single stamping coverage crashes SMS.

SMS 13.0.10 - September 18, 2019

ADCIRC

11925 Script error for ADCIRC NWS6 wind data

BOUSS2D

11880 SMS crashes when trying to open BOUSS2D Spectral Analysis

CAD

11952 CAD Files lost when saving project

Canvas

11915 Can't remove rows in Feature Stamping dialog

CMS Flow

11940 CMS-Flow BC arc does not snap to edge cells of transformed Quadtree Grid and computed vectors not aligned with grid

Datasets

11749 Datasets are never "editable" except for the "Z" dataset.
11720 The activity flags for time derivative datasets is not correct. The resulting dataset has a time step for the midspan of each of the pairs of input time steps, but the values outside of the channel are not contoured (inactive). The nodes have values, but they are not being contoured.
11922 Error with ADCIRC dataset time reference. The problem was with the classes SMS creates to represent script data.

Display Options

11677 Snapping of Monitor Lines in SRH simulation gives illegal set of nodes. The snap does not go all the way through the domain so non-adjacent nodes are listed as "in order" in the node string for SRH-2D.
11904 SMS Display Settings inconsistent. When clicking on various datasets, the assigned display themes don't always load.

Mesh

11924 Scalar paving not generating mesh that matches size function. The mesh has "tongues" of smaller grid spacing radiating out from the inlet that don't match the desired size function.
11921 Some Paving gives inappropriate distribution of points. Elements get bigger on first, then get small again.
11972 Using the Patch method, it can create element with bad interior angle of more than 180 degrees.
11664 Preview Mesh generation in 2D Mesh Polygon Attributes dialog is slow when using a raster for elevation.
11646 vector<T> too long. The map coverage issues an error creating a mesh when the SMS project is loaded in. When the map data is loaded in independently, the mesh is created without issue.

Plots

11916 Crash updating observation plot when using the Extract Profile From command.

Polygon

11859 Update display is very slow with selected polygon. With the polygon selected, Update Display takes around 20 seconds on my computer. Without it selected, it is almost instantaneous.

Scatter Data

11963 Crash when attempting to export scatter set to a text file. Only occurs when there are multiple points.

SRH-2D

11846 Deleting a layer in an SRH Sediment Materials coverage leads to crash. The 'Insert Below' button does not insert below if a line is not selected. If the top row is then deleted, it appears to corrupt the existing line. If the dialog is closed to save those changes, attempting to reopen the properties dialog crashes SMS.

Time Series

11719 Sampling datasets in time using the Dataset Toolbox is not clear and gives too many time steps.
11926 When reading NWS6 fort.22 file the time steps should start at 0.0. The time steps should start at 0:00:00 if it is NWS = 6. They should start at the hot start time if NWS = -6.

TUFLOW

11808 TUFLOW option for ASCII or binary file for grid elevations unavailable. When the option for using ASCII or binary files for grid elevations is toggled on in 2D Model Control, the 'Browse' button remains grayed out so no files can be selected. However, when the option is toggled on and the user attempts to exit the 2D Model Control, an error appears that no file has been selected.

SMS 13.0.9 - July 17, 2019

ADCIRC

11826 ADCIRC not licensed in SMS 13.0 for some users located within time zones in India.

BOUSS2D

11863 SMS crashes when attempting to run BOUSS-2D with training exercise/tutorial. Crash occurs when using the simulation Save Project, Export, and Run BOUSS-2D command.

CMS-Flow

11741 CMS-Flow sediment transport gives empty results. When running the simulation, no sediment transport occurs.

CMS-Wave

11938 Cartesian Grid and CMS-Wave simulation disappear when deleting a point in the spectral coverage.
11890 CMS-Wave XMDF solution format not read correctly. Errors appear that the "wav" files could not be loaded and an empty folder is added to the grid.
11872 Error loading CMS-Wave solution. SMS looking for ASCII output, even though the output format was set to XMDF.

Contours

11806 Quadtree Dataset Contours not correct. Dataset contours are ignored in preference of the general contour settings.

Coverage

11865 The time step associated with a scour scenario is lost in file I/O. When setting the time step in the Bridge Scour Coverage Properties dialog, the setting is not saved.
11696 Prune arc leaves a leg of the arc that should be pruned.
11866 When computing the station on the contracted arc on a bridge scour coverage, the value doesn't appear.

Datasets

11681 The ability to assign multiple dataset specific contour options at once is missing in 13.0.
11868 Brige Scour Properties using the View Values and Export Hydraulic Toolbox File buttons cause SMS to crash. Happens when a bridge scour arc is not defined.

Import

11927 Datasets read from NWS6 format not read correctly. The S value is correct, but Vx and Vy values are not.
11821 Select SRHHYDRO files do not import. Loading in an older SRHHYDRO file to recover a simulation works in 12.2 but fails in 12.3 and 13.0.

Launching

11860 SRH-2D (DMI) Solution is loaded in the wrong folder in the Project Explorer.

Main Menu

11892 Macros for Contours and Vector options not available in Quadtree module.

Map

11822 Converting CAD to Feature Objects hangs in SMS. Mapping CAD layers to feature objects takes much longer in newer versions of SMS than in SMS 11.2.

Memory

11772 Huge memory leak on DMI model native import. Memory not clearing after closing the project.

Mesh

11824 Infinite value in a mesh dataset causes the mesh to not display.. Truncating the dataset fixes the issue.
11754 Interpolating elevation value from a raster does not function as is customary. Interpolate bathymetry from rasters command was missing.
11867 Bridge Scour Properties crash SMS after creating new mesh. Occurs when creating the bridge scour coverage and opening opening the bridge scour properties before a mesh exists in the project.
11861 Selecting a lot of elements is slow. Taking around 30 seconds for SMS to select all elements in a mesh with more than 1000 elements.
11743 Meshes in different projections no longer align correctly. With the switch from Global Mapper to GDAL, some existing meshes no longer align. The original mesh can be reprojected again and will appear to align in SMS 13.0, but the X and Y coordinates will not actually have changed. This means that although the new mesh is set to the new projection, the coordinates are still numerically in the old projection.

Observations

11864 Observation profiles have "gaps" at the vertices of the observation arc when viewing the plot window.

Opening File

11874 Read of NWS 8 is broken causing a script error.
11827 Can't load SRH Solution File. Error occurs when solution does not match geometry. A warning message has been added.

Plots

11908 Plot of BOUSS2D solution crashes when accessing the Plot Options and changing the plot the extract the profile from points and vertices.

Polygons

11838 Polygon material assignment lost when polygon id changed in file using a text editor.

Quadtree

11800 Quadtree 'Map Elevation' button doesn't work. When attempting to switch which dataset sets elevation for a Quadtree, the dataset is either ignored (if node dataset) or overwritten by the existing elevation data (if cell dataset).

Scatter Data

11737 Converting large elevation TIF to Scatter crashes SMS.

Spectral Data

11936 Spectral energy not plotted in Spectral Energy dialog.
11811 CMS-Wave Spectra does not import correctly. When first opening the SMS project, an error appears that the spectral data is not assigned to a model. There is a spectral point with data written to a new spectral coverage. However, the existing 'Spectral' coverage has a point that appears to be empty.

SRH-2D

11894 Residual and Monitor Plots not visible in Simulation Run Queue.
11833 SMS Hangs with Multiple Simulations. Loading more than two simulations into the Simulation Run Queue causes SMS to hang after closing the queue.
11807 SRH-2D Pressure arcs revert to wall type in roundup sturctures NHI exercise.

Time Series

11891 Spectral Time is modified in "write" and "read" of the project. When editing the time for a spectral point, the time is not saved.

UGrid

11825 SMS Crashes when triangulating a UGrid.

SMS 13.0.8 - May 02, 2019

Coverage

11771 Warning appears when attempting to merge coverages. Warning dialog pops up stating "invalid map <K,T> key".
11786 Error duplicating material coverage. A warning message comes up saying "invalid map<K, T> key. On clicking OK the geometry in the coverage is duplicated to a new SRH Material coverage, but the material list an polygon attributes are gone.
11704 Dataset not acknowledged by Observation coverage. The Observation coverage is not recognizing all datasets in the scatter module and gives an error: "Error. No dataset specified for interpolation".

Delete

11781 Unlink coverage command is labeled as delete.

Display Options

11775 Selecting a polygon doesn't work when using the Select Polygon tool.
11776 Dragging to zoom doesn't work. Instead was acting like the Rotate tool.

DMI

11517 DMI: double-field does not work. Causes issues when entering numeric values when using the German language setting.

Export

11753 Symmetric storm (for.22) not written correctly (or at all) when exporting an ADCIRC simulation.

Online Maps

11794 Add online maps doesn't load an image, nor does it download the requested data.

SMS 13.0.7 - April 16, 2019

ADCIRC

11357 Copy protection broken for PADCIRC. States that a license is needed when increasing the number of computational processors being used above 1.

CMS Flow

11607 CMS-Flow solution folder named incorrectly (not matching the simulation name) and doesn’t include the WSE solution.

Contours

11614 Graphics Window doesn't update after deleting ADCIRC solution from project.

Coverage

11705 Opening fort.14 file issue 1. The BC locations were getting lost when opening a fort.14 file.

Datasets

11716 Gradient, Gradient Angle, and Directional Derivative dataset tool should operate on all time steps of the selected dataset.

Export

11751 ADCIRC script fails (gives errors) if a source file is already in the right place. Happens when making a change to the simulation and then exporting.
11687 HEC-RAS 2D export encounters issues when there is a void in the mesh. A warning has now been added if a void is detected in the mesh when exporting to HEC-RAS.

Legend

09481 Incorrect Zonal Classification Output where the tool did not correctly identify all selected values. Unable to consistently reproduce the issue.

Project Explorer

11747 Importing ADCIRC project from SMS 12.3 issues. When bringing in an ADCIRC project built in SMS 12.3 or earlier, SMS 13.0 would incorrect open the project with extra meshes and coverages.
11710 Copying a DMI coverage is too slow. When using the Duplicate command, could take several minutes to copy a coverage.
11692 Collapse All in Project Explorer hides all tree items except "Project". Should be able to see Map Data, GIS Data and other folders.
11660 No "Link" Menu Option on SRH-2D Map coverages when trying to link to a simulation.

Projection

11726 Errors getting NLCD data when EPSG code is not available.
11714 “NAD 1983 HARN StatePlane Montana FIPS 2500 (US Feet)” Projection Missing from new projection dialog.

Scatter Data

11695 Converting raster to scatter results in unexpected behavior where the points and triangles cannot be selected.
11676 Feature stamp with interpolated cross sections results with bad center line elevations.

SRH-2D

11721 Using the Properties right-click menu command on some DMI (SRH, ADCRIC, etc.) coverages causes SMS to crash.

SMS 13.0.6 - March 20, 2019

ADCIRC

11622 SMS not reading ADCIRC max files correctly. Was giving unreasonable maximum elevation and velocity values that did not match the maxele.63 and maxvel.63 files.

CMS Flow

11606 CMS-Flow model checker checks for sediment datasets when sediment transport is turned off.
11603 CMS-Flow wind dataset disrupts load solution. When running the CMS-Flow model, it runs successfully but then gives the error "File not found: 'model4_wind.h5'" When attempting to load the solution. None of the solution files then load. In the model files folder, loading in the individual h5 files loads in the results. The wind magnitude and velocity datasets are loaded from 'model4_met.h5'.

Contours

11616 Mesh Contour Intervals overlap in exported shapefile. When exporting mesh contours to a shapefile, the min/max do not always fall inside of the designated contour interval.

Legend

11612 Coverage legend display shows both default and specific display outcomes instead of only the specific outcome as selected.

Opening File

11650 Cannot open ADCIRC .grd file.

Popup Menu

11675 Project Explorer right-click menu is cut off by the top of the screen when SMS is maximized.

Project Explorer

11660 No "Link" Menu Option on Map Data Item. After unlinking coverages from an SRH-2D simulation, the right-click "Link" menu command for coverages was missing when attempting to link new coverages to the simulation.

SMS 13.0.5 - February 20, 2019

Polygons

11577 The selected polygon does not get highlighted correctly when selecting a channel polygon. The interior polygons (bendway weirs) are highlighted rather than the channel polygon.

SMS 13.0.4 - February 5, 2019

Scatter Data

11573 Converting map coverage to a scatter set causes SMS to crash.
11475 FFP Scatter set loses data values after being saved. When re-opening the scatter set, all elevation values are 0.

SMS 13.0.3 beta - January 25, 2019

Display Options

11451 Change All command for "Arc BC" display options not useful.

Opening File

11445 Large LANDXML file either not opening or taking a long time to open.

Projection

11480 Extra projections being added to the recent projections list in the Projections dialog.

SMS 13.0.2 beta - January 22, 2019

2D Grid

11427 2D Mesh elevations from boundary of patch not using the Coon's Patch as designed

Contours

11505 Need consensus on positive/negative depth convention

Display Options

11474 Map flood fails if scatter contour options not linear

DMI

11466 In the Run Queue, the simulation associated with a set of plots is not clear - add simulation name label to plot
11486 DMI - Database error when combobox option has apostrophes in it
11469 Crash when trying to select dataset with DMI dataset selector

Help

11526 Hide Help-Button when help_button_url is unset

Import

11497 Opening dat file attempts to open as an image (GM)
11471 13.0 - Project import causes crash
11472 13.0 - SRHHYDRO import crashes SMS

Interpolation

11450 Interpolate command causes confusion and loss of functionality

Preferences

11487 GUI Test: Popup does not appear when attempting an invalid Quadtree cell merge

Scatter Data

11190 Convert Map -> Scatter does not work if node or vertex is selected but not used

SRH-2D

11473 Nodes on the wet/dry edge not getting negative depth as expected
11495 Launching SRH-2D simulation unloads datasets from another projection
11314 SRH-2D unable to run Sediment Transport
11502 SRH Wall BC requires extra roughness height even when turned off
11495 Launching SRH-2D simulation unloads datasets from another projection
11467 Double quote character {"} in SRH-2D case name causes SRH-Post script to fail
11492 GUI Test: Error when running multiple SRH2D simulations

STWAVE

11513 OBSE results in STWAVE not projected correctly
11198 Import of STWAVE solution reads vector dataset incorrectly

TUFLOW

11496 SMS crash when attempting to open TUFLOW node attributes

SMS 13.0.1 beta - November 20, 2018

ADCIRC

11353 User cannot view the Command Line output in the Simulation Run Queue
11313 Crash when mapping to 2D mesh using Raster bathymetry in coastal training exercise

CAD

11401 CAD data does not get recognized as having a range

Datasets

11293 Reference time changed when performing dataset calculator operation on Quadtree dataset

Display Options

11408 Projection overlay issues
11333 There is no polygon fill option in the display options for Constant Paving Density

DMI

11406 Run Queue plot colors should be more contrasting

Feature Object

11399 Polygons selection using a map polygon not quite right

General

11367 SRH Interface Slow to Respond

Interpolation

11291 Interpolate to 2D Cartesian Grid

Materials

11368 Corrupt Materials Table when deleting rows

Mesh

11417 Converting selected mesh nodes to a scatter set produces an empty scatter set
11383 Progress report for mesh generation goes above 100%
11386 Setting the contour range uses inactive values. It should not.

Opening File

11371 Processing Conversion of SRH Project from 12.x to 13.x

Plots

11405 Observation profile plot does not update timesteps when "active" selected and user changes time step selection

Polygons

11363 Mesh Preview button causes SMS to hang

Project Explorer

11374 Right-click in project explorer causes SMS crash
11382 Right click menu when scalar and vector selected is missing

Save

11398 Mesh that is not displayed when saving a project is displayed when read in

SRH-2D

11395 Error Exporting SRH Simulation
11381 User can edit text in the Model Checker
11364 Flow trace option in Floodway tool not accessible

TUFLOW

11318 text is unset

SMS 13.0.0 beta - October 15, 2018

Initial Release!!

SMS 12.3 Release Bugfixes

SMS 12.3.5 – December 5, 2018

CAD Data

11455 Converting CAD to Scatter set has crashes

CMS-Wave

10718 CMS-Wave crash: insuffcient virtual memory Windows 10

Feature Objects

11426 Converting to Feature Objects with nothing displayed crashes SMS
11143 SMS switched module from Map to Mesh after dragging a vertex
11151 Converting a coverage from "Generic Model" to "Mesh Generator" loses node attributes

HY-8

11092 HY-8 Culvert with Embedment Depth Specified Fails to Generate Valid Table
10763 Trouble Launching HY8 if the .hy8 file is Stored in a Network Location

Import/Export

11433 Previously supported Scatter format doesn't import
11436 Crash when opening the project

Map Module

11425 Adding arcs to map coverage changes node Z values

Mesh Module

11289 Generic Model BCs not correct
11219 GUI Test: 2 arc intersection error
11152 Mesh Generator coverage still references boundary conditions and crashes
11150 Map to 2D Mesh for Generic Mesh crashes

Project Explorer

11374 Right-click in project explorer causes SMS crash

SRH-2D

10933 SRH-2D Sediment Transport Solution not Generating in SMS 12.3
11448 Progress script error during SRH-2D run
11395 Error Exporting SRH Simulation
11107 PostSRH-2D does not run, might be missing a dependency
11057 SRH-2D Pre-Processor not Formatting Internal Sink

TUFLOW

10724 Infinite loop in map module working with TUFLOW materials file

SMS 12.3.4 – August 8, 2018

CMS Flow

11096 Crash Opening Project
10886 CGWAVE Reset 1D spacing command causes crash

Coverage

11056 SMS Crashes Deleting Monitor Points
11064 GUI Test: TUFLOW 2D materials not being renamed
10934 Clicking Help Button in Create Coverages Dialog Does Nothing
10924 Create coverages Dialog for New CSHORE Simulation isn't Modal

Datasets

11001 Using Scatter Transform Tool Applies Transform to All Datasets and Not Just the Active Dataset
10843 Crash Deleting Datasets

Display Options

10837 SMS Hangs with Specific Vector Display Options

Feature Object

11143 SMS switched module from Map to Mesh after dragging a vertex

GIS

10810 SMS Crashes Opening (*).sdf File

HY-8

10549 Project stuck in Build Culvert Tables

Map

10770 Source Arc Resdisribution Challenge
10732 Two arcs get linked to same attributes

Materials

11085 Dialogs pop in front of SMS when closing the material dialog

Mesh

10896 Read script crashes SMS after a linked geometry is deleted from the project tree

Opening File

10867 Crash Opening project
10864 Crash opening project

Plots

10817 Plot file added to list of recent files but can't be read in

Project Explorer

11050 Computed Values Don't Update Until Datasets Moved to a Folder

Save

11116 Generic Model Definition Not Saving Curve Data In SMS

Scatter Data

10968 Importing LandXML Files Build Corrupt Scatter Sets
10780 Crash deleting points in duplicated scatter set

SRH-2D

11107 PostSRH-2D does not run, might be missing a dependency
10982 HY8 File with No .hy8 Extension Causes Invalid Path to Table File
XMDFC output option no longer supported. So use projects that previously used the XMDFC output option:
1. Go into the model control and change the output option to something that is not "XMDF".
2. Click OK on the dialog to exit out.
3. Re-open the model control and set the output option to "XMDF" and click OK.

SMS 12.3.3 - May 30, 2018

General

010484 Multiple issues with FESWMS structures
010732 Two arcs get linked to same attributes
010816 Crash converting shape to map
010473 ADH project saved from SMS does not run
009794 Polygon material assignment not clear

GIS

010810 SMS Crashes Opening (*).sdf File
010614 Can't drag online images to change order of display in Project Explorer

SRH-2D

010506 False SRH Model Checker message for International Feet
010507 SRH Geometry Units not written for Intl Feet
010557 SRH-Pre failure in 12.3 but works in 12.2
010685 Spaces Preceding SRH-2D Dataset Names

SMS 12.3.2 - May 8, 2018

ADCIRC

010644 SMS write the IHOT value incorrectly
010646 SMS gives a warning on ADCIRC run that appears to be wrong (the file looks okay)
010643 The ADCIRC "Run ID" is not saved correctly

General

010551 Hydrotec Related Feedback - Create and Move Point Lag
010572 Import of native SRH files does not read time series BC data
010547 BC Arc Options shows all possible options
010656 Crash After Deleting All Coverages
010676 Geometric surface of mesh disappears for some view directions
010484 Multiple issues with FESWMS structures
010663 Crash assigning Island weir to arcs
010689 When opening an image (GIS Object) the file is not added to the recent list. It should be
010605 HY-8 Build Tables Executable Filepath not Specified for New Installs of 12.3
010553 Scalar Paving Values not Saved with the Project

Dynamic Model

010601 Sample Dynamic XML cause crash on start-up

Mesh

010612 Add Arcs To Mesh Destroys Mesh
010552 Crash after extrapolation value warning

Model Control

010494 Widget Confusion in SRH Output Control

Online Maps

010614 Can't drag online images to change order of display in Project Explorer

Scatter Data

010576 Import of XML preserves triangulation but not boundary

SRH-2D

010506 False SRH Model Checker message for International Feet
010507 SRH Geometry Units not written for Intl Feet
010557 SRH-Pre failure in 12.3 but works in 12.2
010685 Spaces Preceding SRH-2D Dataset Names
009944 SRH-2D pre-processor crashes.
010703 SRH-2D Requires Initial Conditions WSE Value in SI Units
010232 SRH-2D Sediment Discharge Type Rating Curve not Working

SMS 12.3.1 beta - March 21, 2018

ADCIRC

10380 ADCIRC parameters lost when saving project with multiple meshes, relaunching SMS and opening project

Export

10342 SMS Writes Scatter ASCII Dataset Files Incorrectly

Materials

10490 Crash Assigning Materials

Mesh

09413 Saving Mesh Contours as Shapefiles: Incorrect Polygon Attributes

Plots

10461 Crash in Plot Wizard

Quadtree

10460 Scalar dataset in quadtree not editable when selecting cells while Z dataset is active

Save

10483 FESWMS Ceiling Dataset Duplicated

SRH-2D

10476 Unable to run SRH with duplicate coverage names

TUFLOW

10259 Tuflow Multiple 2D Domains Not Exporting Correctly

WAM

10369 SMS Not Reading WAM Spectra Files
10364 WAM Spectra_User format Incorrect

SMS 12.3.0 beta - February 24, 2018

Initial Release!!

SMS 12.2 Release Bugfixes

SMS 12.2.14 - May 8, 2018

ADCIRC

010644 SMS write the IHOT value incorrectly
010646 SMS gives a warning on ADCIRC run that appears to be wrong (the file looks okay)
010643 The ADCIRC "Run ID" is not saved correctly
010380 ADCIRC parameters lost when saving project with multiple meshes, relaunching SMS and opening project

General

010551 Hydrotec Related Feedback - Create and Move Point Lag
010572 Import of native SRH files does not read time series BC data
010547 BC Arc Options shows all possible options
010656 Crash After Deleting All Coverages
010663 Crash assigning Island weir to arcs
010490 Crash Assigning Materials
010689 When opening an image (GIS Object) the file is not added to the recent list. It should be
010461 Crash in Plot Wizard
010553 Scalar Paving Values not Saved with the Project
010483 FESWMS Ceiling Dataset Duplicated

Display Options

010676 Geometric surface of mesh disappears for some view directions

DMI

010601 Sample Dynamic XML cause crash on start-up

Mesh

010612 Add Arcs To Mesh Destroys Mesh
010552 Crash after extrapolation value warning

Model Control

010494 Widget Confusion in SRH Output Control

Quadtree

010460 Scalar dataset in quadtree not editable when selecting cells while Z dataset is active

Scatter Data

010576 Import of XML preserves triangulation but not boundary

SRH-2D

010488 Merging SRH-2D BC coverages causes arc numbering error
009944 SRH-2D pre-processor crashes.
010476 Unable to run SRH with duplicate coverage names

TUFLOW

010259 Tuflow Multiple 2D Domains Not Exporting Correctly

WAM

010369 SMS Not Reading WAM Spectra Files
010364 WAM Spectra_User format Incorrect

SMS 12.2.13 - March 21, 2018

ADCIRC

10380 ADCIRC parameters lost when saving project with multiple meshes, relaunching SMS and opening project

CMS Flow

10075 Velocity checkbox in CMS-Flow BC coverage arc attributes dialog doesn’t allow user to specify velocity dataset

Contours

10312 TUTORIAL REVIEW: CMS-Wave contour display legend issue
10212 Select with Polygon delete dataset contour options

Display Options

10106 Vector colors not correct

Export

10342 SMS Writes Scatter ASCII Dataset Files Incorrectly
09976 CMS-Flow Salinity Statistical output times incorrect

Feature Object

10221 TUTORIAL REVIEW:Redistribute Arc using a truncated size function removes all vertices

Interpolation

09991 Multiple issues with editing storm track

Materials

10490 Crash Assigning Materials

Mesh

09413 Saving Mesh Contours as Shapefiles: Incorrect Polygon Attributes

Opening File

10309 Crash opening CMS File

Plots

10461 Crash in Plot Wizard
10288 TUTORIAL REVIEW: BOUSS-2D ETA probe plots are not popped out like other plots

Projection

10393 Projections of TINs gets confused in 12.2, 12.3 and 13.0
10239 Incorrect unit label exported to SRH-2D
09693 Reproject is slower in SMS 12.2 than in previous versions of SMS.

Quadtree

10460 Scalar dataset in quadtree not editable when selecting cells while Z dataset is active
10258 Conversion from CMS-Flow domain to scatterset is no longer supported

Save

10483 FESWMS Ceiling Dataset Duplicated
10108 Opening old FESWMS project and resave results in invalid project

Scatter Data

10333 Editing scalar value wipes out timesteps

Simulation

10299 Incorrect Precision Exported for WAM Nested Grid and Spectral Site Location Coordinates

SRH-2D

10476 Unable to run SRH with duplicate coverage names

TOPAZ

09882 GUI Test: TOPAZ runs with an error when the folder path is too long

SMS 12.2.12 - December 20, 2017

Annotation

10083 Annotations have gray shading with lighting turned on

CAD

10058 CAD Data Not Being Displayed After Being Generated

CMS Flow

10130 Can’t delete multiple rows in spatially constant wind CMS-Flow table

Contours

10132 Contour Labels Partially Obscured

Datasets

10078 Smoothing a dataset on a scatter set gives wrong answer

Display Options

10082 Dragging of Feature Nodes Not Shown

Feature Object

10124 Bad arc resulting from redistributing based on source arc
10107 Clean coverage hangs or gives wrong results when attempting to "extend" an arc to intersect

General

10158 Align Arc with Contour Tool Not Functional
10102 Select connecting arc function not working
09998 Selected nodestring during saving causes renumbering

HEC-HMS

09922 WMS Crashes Exporting HMS with Diversions from Basin

Import

10067 Can't import XML file

Mesh

10186 Crash generating AdH Mesh
10063 Duplicate Node Tolerance Incorrect

Plots

10151 Incorrect Plot for BC Populate
10105 Time series plot range is not saved

Preferences

09858 Location of HY8 Executable in Preferences cannot be Changed

Scatter Data

10136 Incorrect Pt Names saved to *.h5 file for scatter set

SRH-2D

09946 SRH BC Populate Tool doesn't work properly unless vertices redistributed

Summary Table

10093 Summary Table Flows Incorrect

SMS 12.2.11 - October 24, 2017

General

09998 Selected nodestring during saving causes renumbering
10067 Can't import XML file
09979 Map Legend is using Global Lighting making it hard to read.
09984 Numerical Precision not clear in GMI
09825 Depth Varying Roughness XY series only displays metric units
09695 Status Window Message Gives Wrong Impression of What Is Actually Happening

Plots

09960 TUFLOW Cross Section Plot not functioning correctly
10028 Plots in 12.2 are much slower than previous versions

Map

09983 Crashing when editing BC value

Datasets

09737 Compare datasets tool does not assign correct values in non-overlap region

Contours

09921 Linear contours not exported to CAD when using dataset contour options
09803 Mesh Contours to CAD Issue

Snapping

10053 Bad Snapping

SRH-2D

09824 Multi-Select and Add to SRH Simulation Issue

SMS 12.2.10 - September 26, 2017

General

09927 SRH “Assign Material Properties” dialog opens when double-clicking outside of any polygon
09999 Minor spelling issue with feature stamping
09965 SMS Incorrectly loading fort.22 wind file
09975 .dat file export does not contain data
09945 The river module commands cause SMS to crash.
09917 Typo in the Redistribute Vertices dialog
09972 GUI Test: Error updating widget value
09926 Project metadata remains after selecting “File | Delete All”
09852 Can't open file with umlaut in name

Datasets

09933 Dataset contour options not defaulting correctly for datasets in a folder
09958 Can’t edit quadtree grid scalar dataset interpolated from scatter

Materials

09959 SMS appears to hang when accessing material properties
09898 Materials numbering error

Mesh

09903 Summary Table give bad values with RMA2 mesh

SRH2D

09906 Modifying Polygons in SRH-2D Materials Coverage causes Other Polygons to Lose Polygon Attributes
09947 SRH Interface doesn't understand comma input

TUFLOW

09993 TUFLOW Form Loss Coefficients

SMS 12.2.9 - August 16, 2017

BOUSS2D

09811 Crash when loading project or when attempting to modify model control of Bouss-2D Simulation without grid
09623 Update for the min recommended depth for BOUSS2D

Coverage

09733 Summary table gives results for only one cross section coverage
09732 Must select centerline coverage for each cross section when generating a summary table

General

09503 Smoothing dataset in scatter has no effect
09830 CMS-Flow Bed Layer Section of Card File Exported Incorrectly
09718 CSDB not being saved with the project
09676 Dataset Toolbox Grid Spacing Tool very slow
09755 Selecting radio buttons in the Extract Cross Sections window turns off radio buttons in other sections
09785 Incorrect Unit Label in "Populate" WSE Tool
09771 Summary Table spreadsheet too big
09729 Feature Stamping doesn't properly trim/intersect surface

Map

09724 CAD to Map Snapping Options Ignored
09780 Crash opening map file

Plots

09719 Plot settings get reset when they shouldn't
09774 Incorrect Errors Reported in Error Plots

Quadtree

09766 Converting Quadtree to Ugrid changes the cell centered datasets to pt centered 06-19-2017
09763 SMS 12.2 missing ability to compute volume on a Quadtree 06-14-2017

Scatter Data

09629 Map->Scatter Not using arc elevations as specified

Summary Table

09819 Generating Summary Table with Mesh Toggled Off Generates Unreliable Results
09818 Summary Table Flows
09734 Specified Datasets not used in Summary Table
09720 Summary Table not working as it should
09734 Specified Datasets not used in Summary Table

SMS 12.2.8 - June 20, 2017

Display Options

09655 Display appears to be missing some curved arrows

Feature Objects

09634 SRH-2D Boundary condition gets corrupted
09632 Can't merge CGrid Rows or Columns

General

09742 GUI Test: Crash when redistributing vertices after doing a Delete All
09730 Changing Temp Directory can create multiple file browser dialogs
09678 Can't change temp directory
09567 SMS hangs creating water level arcs for TUFLOW coverage
09633 Dimming of widgets in Feature Stamping Dialog
09363 Minor PTM error message when saving project
09717 Line properties from HEC-RAS not read into SMS

Mesh

09663 Crash Merging Meshes

Plots

09653 ARR Plot takes too long to come up and is too sensitive

Projection

09654 Converting mesh boundary to "unprojected" coverage gives wrong result

Scatter Data

09625 The Scatter Contour to Feature arc dialog can become too small
09566 SMS hangs merging scatter sets

SRH-2D

09681 Incorrect formatting for Supercritical BC for SRH
09616 SRH-Pre Cannot read Sediment Gradation XYS files that Have a Space in the Name

SMS 12.2.7 - April 11, 2017

ADCIRC

09425 SMS Freezes in Spacial Attributes Dialog

CMCARDS

09571 Crash opening cmcards file

DMI

09461 DMI control_set not functioning as expected
09551 The DMI puts a lock on the executable and doesn't release it
09330 Polygon attributes in DMI coverages not being saved/read correctly
09461 DMI control_set not functioning as expected
09555 DMI Model Wrapper progress bar does not turn red when process fails
09549 DMI Model Wrapper progress bar does not turn green when process completes
09556 DMI Model Wrapper should uncheck "Load Solution" when the user aborts.
09550 CMS-Flow model does not write wind curve if no BC file is in the simulation
09552 DMI Model Wrapper should change focus to a new process when it launches that process

GIS

09561 Mapping .shp to Obstructions Coverage

Mesh

09481 Incorrect Zonal Classification Output

General

09557 Slow Display Response - Create Node Example

SMS 12.2.6 - March 21, 2017

Map

09540 Offset Arcs Defaults and Saved Values

DMI

09449 Assigning two arcs boundary conditions at the same time give DMI error and doesn't work
09450 Changing model version number in XML makes project crash

Projection

09430 Node Transformation Not Saved

Datasets

09500 Dataset Toolbox Filter Issue

SRH-2D

09535 Crash After SRH Run
09537 Repeating Error Message about Boundary Node

SMS 12.2.5 - March 14, 2017

General

09472 Help links for SRH-2D sediment transport dialogs don't work
09436 Crash when using remote desktop

DMI

09421 Inserting a row into a DMI table results in wrong row being active

ADH

09424 Extra nodestring created when reading AdH model
09423 SMS corrupts AdH nodestring

CMS-Flow

09158 CMS-Flow Sediment Errors

Datasets

09428 Dialog appears behind the working window

Quadtree

09434 Generating a large quadtree causes SMS to crash

SRH-2D

09422 Cursor spins and spins in DMI
09432 SRH Materials Coverage and Sediment Materials Coverage Bad After Building New Polygons

SMS 12.2.4 beta - February 15, 2017

ADCIRC

09219 ADCIRC Model Control Incorrect Tidal Amplitude

ADH

09424 Extra nodestring created when reading AdH model
09423 SMS corrupts AdH nodestring

CMS-FLOW

09158 CMS-Flow Sediment Errors

Datasets

09428 Dialog appears behind the working window

Display Options

09351 Snap Preview when arc display option is off

Quadtree

09434 Generating a large quadtree causes SMS to crash

SRH-2D

09422 Cursor spins and spins in DMI
09401 False model checker warning and SRH crash

SMS 12.2.3 beta - January 17, 2017

General

09306 Can't use a German "umlaut" in an annotation string
09309 Plot window appears when opening project with plots in community edition
09307 Crash opening project in Community Edition
09323 Recently opened file list is cleared when opening a project with a plot
09321 Plot window is not restored when project with plot is opened
09286 Displaying Cartesian grids in version 12 (and 13) is up to 2 orders of magnitude slower than version
09208 SMS Disk I/O Performance
09160 Incorrect Interpolation Menu for Rasters
09346 Error message for overlapping arcs and error messages in general
09310 The error message box has a redundant line that shows the type of error.
09301 Organizing Linked Coverages Causes SMS to Become Unresponsive
09382 Combined XYZ Length is incorrect for multiple arcs
09384 Element material type reported for generic mesh

Datasets

09314 Smoothing Dataset Taking a Very Long Time
09187 Comparing Datasets Subtraction in SMS vs. Documentation

Display Options

09290 Observation points not visible when display atts are turned on.

DMI

09264 DMI export of coverage arcs and points of a polygon not working

Feature Objects

09347 Lag in error message
09342 Nodestring ID visibility
09343 Renumber Nodestrings Changes Nodestring Direction
09335 Renumbering nodestrings messes up weir directions
09304 Select all for triangles does not show information
09283 Mesh visibility affects extracted data in observation coverage
09256 DMI polygon attributes lost

Grids

09276 The weirs in an ADCIRC mesh don't save correctly

Mesh

09333 Two types of unassigned ADCIRC nodestrings
09205 Exported shapefile does not contain elevation data
09280 Unexpected Warning Stating Bandwidth Unusually High
09316 CGWAVE .cgi precision

Model Control

08983 Curves and table values read from DMI H5 file not read in

Plots

09322 Plot windows don't close on Delete All
09289 Plot Wizard Display Options
09239 Saving causes a crash when the data in the plot is not correct
09328 Unable to save image file
09390 SMS does not write SRH Input file for Internal Sink SRH Simulation
09357 SRH QuickWin doesn't show Water Elevation Plot when run through SMS

UGrids

09199 UGrid Interpolator doesn't allow Map to Z option

SMS 12.2.2 beta - November 14, 2016

ADCIRC

09234 Crash performing Model Check

Map

09185 1D Summary Table Crash
09186 Can't close summary table dialog with X

Datasets

09179 Unable to Perform Operation when Comparing Datasets in Data Set

Grids

09255 CMS-Wave save creates invalid file if no spectra assigned

Mesh

09210 Transform Command Invalidates Dataset
09220 Mesh disappears from project
09237 SMS crashes when merging nodestrings
09231 Writing ADCIRC weirs nodestrings corrupted when a mesh is duplicated
09139 ADCIRC BC types not correctly maintained when merging meshes

Online Maps

09226 Map to Curvilinear function fails

General

09228 Summary Table is only exported if the user types the file extension
09227 Save File dialog has an Open button instead of Save
09075 Check for Updates Not Working
09200 SRH normal depth boundary condition issue

TUFLOW

09221 TUFLOW results opening switches to scatter module
09222 TUFLOW project loses Geometry Component

UGrid

09215 Converting Quadtree to UGrid sometimes creates an extra folder

SMS 12.2.1 beta - October 10, 2016

Coverage

09185 1D Summary Table Crash
09186 Can't close summary table dialog with X`

Export

09145 SMS Exporting HY8 Culvert Arc Nodestrings Incorrectly

Feature Objects

09142 Revert subset hangs or crashes
09138 Working in subset mode confuses ADCIRC boundary conditions
09144 ADCIRC nodestring with multiple instances of same node not detected and fixed

Mesh

09139 ADCIRC BC types not correctly maintained when merging meshes
09057 Interpolating nodes puts mesh into disarray

Project Explorer

09121 SMS DMI allows multiple coverages of same type to be added to a simulation if added by a single drag
09122 Inconsistency of terminology when unlinking elements from a SRH-2D simulation

Projection

09146 Opening ADCIRC mesh in geographic coords does not set the projection if the data spans the international date line

General

09075 Check for Updates Not Working
09172 Crash opening project with SRH model

SMS 12.2.0 beta - September 10, 2016

Initial Release!!

SMS 12.1 Release Bugfixes

SMS 12.1.10 - January 25, 2017

Annotation

09306 Can't use a German "umlaut" in an annotation string

Dynamic Model

09264 DMI export of coverage arcs and points of a polygon not working

Feature Objects

09343 Renumber Nodestrings Changes Nodestring Direction
09335 Renumbering nodestrings messes up weir directions
09304 Select all for triangles does not show information
09283 Mesh visibility affects extracted data in observation coverage
09256 DMI polygon attributes lost

Grids

09276 The weirs in an ADCIRC mesh don't save correctly

Mesh

09333 Two types of unassigned ADCIRC nodestrings
09205 Exported shapefile does not contain elevation data

Plots

09289 Plot Wizard Display Options

UGrid

09298 Dataset imported after exporting in H5 format from UGrid can't be read

General

09301 Organizing Linked Coverages Causes SMS to Become Unresponsive
09328 Unable to save image file
09286 Displaying Cartesian grids in version 12 (and 13) is up to 2 orders of magnitude slower than version 11
09208 SMS Disk I/O Performance

SMS 12.1.9 - November 16, 2016

ADCIRC

09234 Crash performing Model Check

Grids

09255 CMS-Wave save creates invalid file if no spectra assigned

Mesh

09220 Mesh disappears from project
09231 Writing ADCIRC weirs nodestrings corrupted when a mesh is duplicated
09139 ADCIRC BC types not correctly maintained when merging meshes

General

09075 Check for Updates Not Working
09200 SRH normal depth boundary condition issue

TUFLOW

09221 TUFLOW results opening switches to scatter module

SMS 12.1.8 - October 19, 2016

General

09075 Check for Updates Not Working
09145 SMS Exporting HY8 Culvert Arc Nodestrings Incorrectly
09172 Crash opening project with SRH model
09053 Default Help Option is said to be Online but Actually takes you to Local Help

Spectral Data

09124 Crash When Using Display Tools in Spectral Energy Dialog

Projection

09146 Opening ADCIRC mesh in geographic coords does not set the projection if the data spans the international date line

Plots

09114 Isues with observation plots
09020 Observation Plot Doesn't Look As Expected

Mesh

09139 ADCIRC BC types not correctly maintained when merging meshes
09057 Interpolating nodes puts mesh into disarray
08824 Deleting points of a mesh in non-display projection forgets what it is doing

Map

09127 Can't make observation arcs visible

Grids

09113 Bad grid created from Generic Grid generator coverage when set to "Mesh Centered" type

Feature Objects

09142 Revert subset hangs or crashes
09138 Working in subset mode confuses ADCIRC boundary conditions
09144 ADCIRC nodestring with multiple instances of same node not detected and fixed

Dynamic Model

09042 No default display of snapped arcs

SMS 12.1.7 - August 13, 2016

ADCIRC

08955 Edit fields for Harmonic parameters in files tab of ADCIRC model control
08937 Spatial Attribute changes not saved

BOUSS2D

09008 Crash When Attempting to Save, Export, and Launch BOUSS-2D Simulation

Contours

08957 Can't populate contours with proper range of values

Datasets

08974 Dataset conversion from vector to scalar not working for Quadtree from Toolbox

DISPLAY OPTIONS

09046 Raster Display Doesn't Update Properly when Changing Point Size and Maximum Points
08962 Incorrect update of CMS-Wave cell attribute display
08939 Display doesn't refresh after pan

Dynamic Model

09029 Can't run or specify location of aswip
09027 DMI crash when referencing nonexistent dialog

Feature Objects

08956 Select by Dataset Value does not work on UGrid Z dataset
08952 ADCIRC Mesh elevations revert back to old values when reopening SMS and project
08954 Nodestrings with Unassigned Boundary Conditions aren't Being Saved

General

08979 Text of the Coverage to Smooth Button is Overflowing
09024 SMS Steering Menu Item
09070 User gets error message when canceling out of ImportWizard
09041 SMS is Trying to Read in Files that it Shouldn't
08960 Open File Format appears instead of an error message
09069 SMS Coverage Duplicate Issues
08942 Can't access right-click menu for datasets
08963 PTM particles remain in display after deletion
09040 Arc BC data not saved
09087 The Time Step time is not being displayed when the time is 12:00:00 AM

Quadtree

08949 Can’t edit quadtree scalar datasets
08975 Quadtree transform fails to transform refined cell points
08882 Quadtree Grid menu items

Raster

08921 Raster Frame and Display
08914 Crash trying to open .las file as "Raster"

Simulation

08988 Crash When Creating New WAM Simulation

Spectral Data

08972 The direction of the wave components converting from spectra to CGWAVE is not spectra dependent and is wrong
08971 Converting spectra to CGWAVE wave components does not clear spectral list
08940 Can't work with high number of spectral indices

SMS 12.1.6 - June 2, 2016

ADCIRC

08899 ADCIRC solution with small timestep won't read in
08813 Incorrect NWS value written to control file

BOUSS2D

08768 B2D Wave maker minimum period (tmin) is not filled in anymore
08767 B2D Warning of time range is wrong

Datasets

08795 Map Elevation command doesn't use specified dataset
08745 Floodway tool Crash
08794 Scatter Visibility affects dataset used for interpolation
08782 Data Calculator behavior type vs. paste
08757 UGrid datasets generate their own dset contour options

Display

08880 CGWAVE nodestrings are numbered with bogus IDs
08865 Color of snap preview does not change after hitting OK

Export

08797 DMI - If a curve is associated with a "set", it is not exported
08765 BOUSS-2D damping dataset not computed completely

Feature Objects

08766 Wave maker no longer shows direction
08885 Weir from bug 8798 leaves elements in the interior
08881 ADCIRC node strings not numbered correctly
08798 Crash Creating ADCIRC Weir
08777 Canceling In Select Dataset Dialog Changes Functional Surface Options

General

08866 The Line Attributes dialog is not modal
08868 XMDF File Not Loaded In Correctly
08800 Functional Surface Won't Use User Defined Dataset

Interpolation

08755 Interpoate from Quadtree to Scatter vector crashes

Map

08829 Incorrect polygon fill display

Mesh

08830 Preview Mesh leaves a gap in the mesh.
08840 Issues with Functional Surface on Mesh
08787 Map-2D Mesh with multiple rasters

Particles

08856 Crash When Writing Particles Subset If the File Name Has not Been Set

Plots

08763 Observation plots not consistent
08764 Observation plot from Mesh is too long
08762 DEM Observation plot of data doesn't show up

Project Explorer

08769 SMS gets confused about the mesh module
08746 Missing features for TUFLOW 1D

Projection

08799 Missing Cross Section data in Summary Table
08854 Crash After Reproject All

Raster

08838 Incorrect Raster Elevations

Scatter Data

08907 Saving an empty scatter set corrupts project.
08908 Dialog indicates spacing is in meters when it is really in degrees
08848 Crash Saving Project After Failed Interpolation
08837 ADH Model Checker SI Units
08847 Error When Using an Existing Dataset for Extrapolation

SRH-2D

08748 Can't Open SRH solution after model run

TUFLOW

08846 Crash Saving TUFLOW Project

SMS 12.1.5 - April 20, 2016

CMCARDS

08739 Loading CMS-Flow project from SMS 11.2 does not associate the projection correctly

CMS Flow

08668 CMS Project Crash
08695 CMS-Flow Registration Item Disrupts SRH Coverages

Map

08682 Selecting Polygons Takes a Long Time
08690 SMS Does not Preserve "Bank" attribute type in the 1D Hydraulic Centerline Coverage

General

08697 Splash Screen Causes SMS to Hang
08702 SMS Main Menu, and Hot Key for Help Goes to Internet Only

GSSHA

08642 GSSHA Upstream Culvert

Import

08711 Opening multiple surveys at a single time gives error message

Mesh

08730 Map->2D Mesh is too slow "Setting nodal z values..."

Models

08575 Observation Data Cannot be Defined for stream arcs with an arc type of "General Stream"

Plots

08581 Drogue plot shifts when zooming out

Quadtree

08673 Problems Rotating on Quadtree/CGrid with Grid Frame
08672 Able to Create Quadtree When Quadtree Not Enabled

Scatter Data

08720 Converting coverage to spacing scatter gives wrong values
08719 Converting coverage to scatter hangs

SRH-2D

08747 Data sets don't appear under Mesh Data after running SRH-2D.
08689 SMS Not Saving Populated WSE Value

SMS 12.1.3 - March 03, 2016

Contours

08653 Contour options are not initialized on UGrid dsets after duplicate operation

General

08593 Empty spreadsheet double cells crash xms
08649 Crash opening .dep file
08596 Polygon Fill Display Incorrect

Boundary Conditions

08635 Snap Preview won't stay off

Dynamic Model Interface

08622 DMI range type edit boxes change values on blur
08623 DMI double clicking anywhere with polygon select tool enabled opens polygon attributes menu
08637 DMI Building New Polygons Messes Up Dependencies on Old Polygons

Mesh

08597 Mesh Paving Crash
08604 Renumbering a mesh with gaps while color fill contours is on causes a crash

UGrid

08595 UGrid Functional Surface doesn't display correctly when new active dataset selected

ADCIRC

08607 ADCIRC files not copied to run directory when executing ADCIRC
08606 SMS does not read in ADCIRC data correctly

Vectors

08615 Vector to Scalars Command Generates Dataset with Incorrect Velocities

SRH-2D

08608 SRH-2D material coverage created from FESWMS coverage has bad attributes for polygons

SMS 12.1.2 - January 24, 2016

Datasets

08544 - Dataset compare feature is not working

DMI

08527 - #file_name keyword is not accessible when process_on_condition is used in input_file

PBL

08571 - PBL output grids not displayed correctly

FESWMS

08536 - Crash After saving FESWMS Project and Reopening Saved Files

CMS-Wave

08567 - Opening CMS-Wave simulation with the Display Projection set to Geographic creates incompatible display case

CMS-Flow

08555 - Crash opening CMS-Flow project

Contours

08478 - Contours change when they shouldn't
08549 - Contour update issue on quadtrees after interpolating datasets from one to the Z of the other

Mesh

08542 - Summary table from 2dMesh uses elevation value for all datasets
08550 - Cannot edit multiple nodes simultaneously on a vtk mesh

Quadtree

08547 - Min and max not set when interpolating one quadtree dataset to Z of another
08493 - Quadtree Created in the Wrong Direction after Changing Coverage Types

General

08566 - Date/Time stamps for the year 2000 - 2009 are read incorrectly when written with 8 digit format
08563 - Cells in a table become blank
08560 - SMS crashes when clicking the top left cell of the Linear BC table.
08561 - Wording correcting in film loop error
08557 - Merging coverages causes duplicate node ids
08526 - Order, i_order, and j_order attributes have no effect on process_each_polygon operations on cgrids
08481 - Redistribute Verices without cubic spline causes points in bad places
08545 - Confirmation setting not used when deleting coverages with the "Del" key
08404 - Saving and Reopening Coverages Removes Certain Characters
08492 - Wrong Popup When Generating a CGrid with No Grid Frame

SMS 12.1.1 beta - December 07, 2015

CMS Flow

08476 - Error Popup when Opening Old CMS-Flow Project File in 12.1

Coverage

08519 - Merged coverage has inappropriate atts that cause a crash when cleaning
08501 - Crash Deleting All Coverages

Feature Object

08513 - Double-Clicking on point in DMI Coverage does not bring up dialog

Grids

08508 - DMI unable to conditionally retrieve cell i and j based on bound coverage attribute
08511 - Points Snap to Incorrect CGRID Cells During CMS-WAVE2 DMI Export

Map

08496 - Strange Behavior and Crash When Merging Polygons
08495 - Crash When Merging Polygons
08452 - Redistribution of arc that is not in display projection causes problems

Mesh

08483 - Incorrect mesh preview in polygon attributes
08499 - Incorrect Mapping of BC arc to mesh
08491 - Crash committing mesh subset
08502 - SMS deletes duplicate elements without reporting what elements are being deleted

Opening File

08494 - Crash or Hang when opening project
08507 - Cross sectional database with "." in the name gets trimmed

Project

08522 - Crash Opening SRH Tutorial

Project Explorer

08330 - Project Explorer Items not updating their display properly

Quadtree

08493 - Quadtree Created in the Wrong Direction after Changing Coverage Types

Raster

08488 - Observation plot options allow user to select images if raster is loaded, but then says it is invalid

Saving

08473 - Crash during save of generic model

Scatter Data

08482 - Crash loading project file merging dynamic database (MergeAfterAllFilesReadIn)

SMS 12.1.0 beta - Release November 17, 2015

Initial Release!!

Older Bugfixes

For older versions of SMS that are no longer actively supported, see the individual bugfix articles:

Bugfix Article	Release Notes
Bugfixes SMS 10.0	SMS 10.0 Intermediate Release
Bugfixes SMS 10.1	SMS 10.1 Intermediate Release
Bugfixes SMS 11.0	SMS 11.0 Intermediate Release
Bugfixes SMS 11.1	SMS 11.1 Intermediate Release
Bugfixes SMS 11.2	SMS 11.2 Intermediate Release
Bugfixes SMS 12.0	SMS 12.0 Intermediate Release

@@ Line 8: / Line 8: @@
 *13279 Dataset calculator for max gives unhelpful error message for mismatched timesteps
 '''Mesh'''
-*13276 Can't use Existing Nodes meshing option
+*13276 The Existing Nodes meshing option brings up an error when used.
 *13269 SMS crashes when interpolating Mesh to a Scatter with no datasets.
 '''Raster'''

v • e SMS – Surface-water Modeling System
Modules:	1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid
General Models:	3D Structure • FVCOM • Generic • PTM
Coastal Models:	ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM
Riverine/Estuarine Models:	AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV
Aquaveo • SMS Tutorials • SMS Workflows

SMS:Release Notes SMS: Difference between revisions

Revision as of 17:15, 9 November 2021

SMS 13.1 Release Bugfixes

SMS 13.1.14 - September 15, 2021

SMS 13.1.13 - August 24, 2021

SMS 13.1.12 - July 02, 2021

SMS 13.1.11 - June 07, 2021

SMS 13.1.10 - April 26, 2021

SMS 13.1.5 beta - December 1, 2020

SMS 13.1.2 beta - September 20, 2020

SMS 13.1.1 beta - August 6, 2020

SMS 13.1.0 beta - June 21, 2020

SMS 13.0 Release Bugfixes

SMS 13.0.14 - June 24, 2020

SMS 13.0.13 - April 29, 2020

SMS 13.0.12 - January 31, 2020

SMS 13.0.11 - November 11, 2019

SMS 13.0.10 - September 18, 2019

SMS 13.0.9 - July 17, 2019

SMS 13.0.8 - May 02, 2019

SMS 13.0.7 - April 16, 2019

SMS 13.0.6 - March 20, 2019

SMS 13.0.5 - February 20, 2019

SMS 13.0.4 - February 5, 2019

SMS 13.0.3 beta - January 25, 2019

SMS 13.0.2 beta - January 22, 2019

SMS 13.0.1 beta - November 20, 2018

SMS 13.0.0 beta - October 15, 2018

SMS 12.3 Release Bugfixes

SMS 12.3.5 – December 5, 2018

SMS 12.3.4 – August 8, 2018

SMS 12.3.3 - May 30, 2018

SMS 12.3.2 - May 8, 2018

SMS 12.3.1 beta - March 21, 2018

SMS 12.3.0 beta - February 24, 2018

SMS 12.2 Release Bugfixes

SMS 12.2.14 - May 8, 2018

SMS 12.2.13 - March 21, 2018

SMS 12.2.12 - December 20, 2017

SMS 12.2.11 - October 24, 2017

SMS 12.2.10 - September 26, 2017

SMS 12.2.9 - August 16, 2017

SMS 12.2.8 - June 20, 2017

SMS 12.2.7 - April 11, 2017

SMS 12.2.6 - March 21, 2017

SMS 12.2.5 - March 14, 2017

SMS 12.2.4 beta - February 15, 2017

SMS 12.2.3 beta - January 17, 2017

SMS 12.2.2 beta - November 14, 2016

SMS 12.2.1 beta - October 10, 2016

SMS 12.2.0 beta - September 10, 2016

SMS 12.1 Release Bugfixes

SMS 12.1.10 - January 25, 2017

SMS 12.1.9 - November 16, 2016

SMS 12.1.8 - October 19, 2016

SMS 12.1.7 - August 13, 2016

SMS 12.1.6 - June 2, 2016

SMS 12.1.5 - April 20, 2016

SMS 12.1.3 - March 03, 2016

SMS 12.1.2 - January 24, 2016

SMS 12.1.1 beta - December 07, 2015

SMS 12.1.0 beta - Release November 17, 2015

Older Bugfixes

Related Topics

Navigation menu

Search