SMS:Recompute All Stations: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
|||
| Line 14: | Line 14: | ||
|} | |} | ||
These start and end stations are set when you assign a river name to an arc, so you should really never need the | These start and end stations are set when you assign a river name to an arc, so you should really never need the '''recompute all stations''' command unless you change the computational length, start station, or end station values for a centerline arc. | ||
==Related Topics== | ==Related Topics== | ||
Revision as of 21:19, 25 March 2013
| 1D River Module |
|---|
|
|
| Aquaveo |
This function can be used if an arc's "Computational Length" value on a river changes. It sets the Start and End station values for each of the arcs with the same river name based on the computational lengths of each arc. So, for example, if you had 3 arcs in a river, the most downstream arc being 30 feet, the next arc being 40 feet, and the next arc being 50 feet, the starting and ending stations would be as follows for each of the arcs:
| Arc | Start Station | End Station |
| 1 (downstream) | 0.0 | 30.0 |
| 2 | 30.0 | 70.0 |
| 3 | 70.0 | 120.0 |
These start and end stations are set when you assign a river name to an arc, so you should really never need the recompute all stations command unless you change the computational length, start station, or end station values for a centerline arc.
Related Topics
SMS – Surface-water Modeling System | ||
|---|---|---|
| Modules: | 1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid |  |
| General Models: | 3D Structure • FVCOM • Generic • PTM | |
| Coastal Models: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM | |
| Riverine/Estuarine Models: | AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV | |
| Aquaveo • SMS Tutorials • SMS Workflows | ||
