SMS:SRH-2D Pressure Flow with 3D Bridges Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
m (Protected "SMS:SRH-2D Pressure Flow with 3D Bridges Workflow" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
No edit summary
 
Line 1: Line 1:
__NOINDEX__
{{Deprecated Workflow}}
To create a pressure flow structure using 3D bridges in an [[SMS:SRH-2D|SRH-2D]] model, use the following steps:
To create a pressure flow structure using 3D bridges in an [[SMS:SRH-2D|SRH-2D]] model, use the following steps:
{{SRH Pressure with 3D Bridges Workflow}}
{{SRH Pressure with 3D Bridges Workflow}}

Latest revision as of 19:29, 10 October 2023

To create a pressure flow structure using 3D bridges in an SRH-2D model, use the following steps:

1. Create 3D bridge arcs.
See the 3D Bridge workflow for instructions on how to do this.
2. Copy bridge arcs to the SRH-2D boundary conditions coverage.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select both bridge arcs.
  2. Right-click and select Copy to Coverage.
  3. In the Select Coverage dialog, select the SRH-2D boundary condition coverage that will be used in the SRH-2D simulation.
3. Create a link structure.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select both bridge arcs in the BC coverage.
  2. Right-click and select the Assign Linear BC... command.
  3. In the SRH-2D Linear BC dialog, assign the link boundary conditions specifying the link inflow as a "weir".
4. Include the 3D bridge in the simulation.
  1. Right-click on the simulation and select the Model Control command.
  2. Set the model parameters in the SRH-2D Model Control dialog to include using a ceiling file and the 3D bridge.