AHGW:2D Cross Section Wizard: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Tag: Reverted
m (Reverted edits by Jcreer (talk) to last revision by Rcorrigan)
Tag: Rollback
Line 1: Line 1:
{{TOC right}}
{{TOC right}}
The ''XS2D Cross Section Image'' pane is accessed by clicking [[File:AHGW Build XS2D Background Icon.png]] '''2D Cross Section Image''' on the [[AHGW:Arc Hydro Groundwater Toolbar|Arc Hydro Groundwater Ribbon]]. This tool helps register a digital cross section image for use in building 2D cross sections in ArcGIS Pro.
The ''2D Cross Section Wizard'' dialog is accessed by clicking [[File:AHGW XS2D Wizard Icon.png]] '''2D Cross Section Wizard''' on the [[AHGW:Arc Hydro Groundwater Toolbar|Arc Hydro Groundwater Toolbar]]. This tool helps create a new data frame in which to display a 2D cross section for the selected section line in [[ArcGIS]].  
[[File:ArcGIS Pro Create XS2D Cross Section.png|thumb|350px|right|''XS2D Cross Section Image'' pane]]
The following sections, options, and fields are available:
==SectionLine and Cross Section Setup==
*''SectionLine'''' section – Contains tools for selecting the desired SectionLine. Also, lists attributes of the selected SectionLine.
**''SectionLine Layer'' – Select the desired SectionLine layer from the drop-down.
**[[File:Arcgispro Slct.png|16 px]] – Select this icon to activate the select tool. Then, left-click on the SectionLine feature that will be used to create the XS2D cross section. Once the SectionLine is selected, its attributes will appear in the ''ID'', ''Length'', and ''Name'' fields.
*''Cross Section Setup'' section
**''XS2D Catalog Table'' – Select the XS2D catalog table from the drop-down. The default is "XS2D_Catalog".
==Image File==
*''Image File'' section
**''Image file used'' – Displays the absolute path to an image file for creating the XS2D cross section. Click [[File:Arcgispro AddData.png|16 px]] to bring up the ''Choose XS2D Image'' dialog where an image file can be selected. Click '''OK''' in that dialog after selecting an image to close it and open the ''XS2D Image'' dialog.
***''XS2D Image'' dialog – This dialog has two sections.
****''Image'' section – Displays the image selected in the ''Choose XS2D Image'' dialog.
*****Referencing sliders – Use the sliders—labeled ''XLeft'', ''ZTop'', ''ZBottom'', and ''XRight''—to move the referencing lines (in green and red) to the referencing locations on the image.
****''Coordinates'' section – Displays coordinates for the X left and right and Z top and bottom of the image. Only the ''Z Top'' and ''Z Bottom'' are editable.
****''Finish'' – Saves the settings and closes the ''XS2D Image'' dialog.
[[File:ArcGIS Pro XS2D Image.png|thumb|350px|left|''XS2D Image'' dialog]]
{{-}}
==Panel Dividers, Grid settings, and Running the Tool==
*''Panel Divider Elevations'' section
**''Minimum'' – A decimal value for the minimum elevation at which to draw the panel divider.
**''Maximum'' – A decimal value for the maximum elevation at which to draw the panel divider.
**'''Suggest Elevations''' – Click to populate the above two fields with suggested values based on the image registration being used.
*''Grid Extent'' section
**''Top'' – Enter a decimal value for the maximum elevation.
**''Bottom'' – Enter a decimal value for the minimum elevation.
**''Left'' – Enter a decimal value for the left extent.
**''Right'' – Enter a decimal value for the right extent.
**'''Suggest Grid Extent''' – Click to populate the above four fields with suggested values based on the image registration being used.
*''Grid Spacing'' section
**''Distance between major grid lines''
***''Horizontal'' – A decimal value for the horizontal distance between vertical major grid lines.
***''Vertical'' – A decimal value for the vertical distance between horizontal major grid lines.
**''Number of minor grid lines''
***''Vertical'' – Integer value for number of minor grid lines between major vertical grid lines.
***''Horizontal'' – Integer value for number of minor grid lines between major horizontal grid lines.
**'''Suggest Grid Spacing''' – Click to populate the above four fields with suggested grid spacing values.
*'''Create XS2D Data''' – Runs the ''Create XS2D Cross Section'' tool. The tool uses the information entered to create an XS2D data frame and map view representing the features entered. Once the XS2D data frame has been created, ArcGIS Pro drawing tools can be used to digitize a cross section.
{{-}}
==ArcGIS Notes==
While many of the features of this tool are the same between ArcGIS Pro and ArcGIS, there are some major differences. So for the convenience of those using Arc Hydro Groundwater in ArcGIS, all the documentation relevant to ArcGIS is found below, even if it's a repeat from documentation above.
 
 
The ''Import XS2D Image Wizard'' dialog is accessed by clicking [[File:AHGW Build XS2D Background Icon.png]] '''Import XS2D Image Wizard''' on the [[AHGW:Arc Hydro Groundwater Toolbar|Arc Hydro Groundwater Toolbar]]. This tool helps register a digital cross section image for use in building 2D cross sections in [[ArcGIS]].  


The dialog contains the following pages:
There are three pages to this dialog:
*Step 1: Cross Section Setup
*Step 1: Cross Section Setup
*Step 2: Image Registration
*Step 2: Cross Sections Panels, Panel Dividers, and Borelines
*Step 3: Cross Sections Panels and Panel Dividers
*Step 3: Grid Lines
*Step 4: Grid Lines


===Cross Section Setup===
==Cross Section Setup==
[[File:AHGW Import XS2D Image Wizard dialog Step 1.png|350px|thumb|right|The ''Step 1'' page of the ''Import XS2D Image Wizard'' dialog]]
[[File:AHGW 2D Cross Section Wizard dialog Step 1.png|350px|thumb|right|The ''Step 1'' page of the ''2D Cross Section Wizard'' dialog]]
The following sections, options, and fields are available:
The following sections, options, and fields are available:
*''Section Line Properties'' section – Not user editable. Lists attributes of the selected section line.
*''Section Line Properties'' section – Not user editable. Lists attributes of the selected section line.
*''Wells and Borehole Log'' section
**''Use well and borehole log data'' – Select ''Yes'' or ''No''. Selecting "no" allows the user to proceed without selecting any wells.
**''Well layer'' – Select the desired layer from the drop-down.
***Well unique ID field – Select the field to use as the well unique ID field. Default value is "HydroID".
**''Borehole log table'' – Select the desired table from the drop-down.
***WellID field – Select the field to use as the WellID field. Default value is WellID.
**''Number of wells selected'' – Displays the quantity of wells selected. If no wells are selected, may display a warning to the right of the quantity value.
*''Cross Section Setup'' section
*''Cross Section Setup'' section
**''XS2D Catalog Table'' – Select the XS2D catalog table from the drop-down. The default is "XS2D_Catalog".
**''Vertical exaggeration'' – Enter a decimal value for the amount of vertical exaggeration in the display of the information.
**''XS2D Catalog Table'' – Select the table from the drop-down.
**{{anchor|Select Output Workspace}}''Default output workspace'' – Displays the absolute path to the output workspace. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Select Output Workspace'' dialog where a new output workspace can be created.
**{{anchor|Select Output Workspace}}''Default output workspace'' – Displays the absolute path to the output workspace. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Select Output Workspace'' dialog where a new output workspace can be created.
*''Image File'' section
*'''Next''' – Switches to the [[#Cross Sections Panels, Panel Dividers, and Borelines|second page]] of the ''2D Cross Section Wizard'' dialog.
**''Image file used for creating the XS2D Cross Section'' – Displays the absolute path to an image file. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Open XS2D Image File'' dialog where an image file can be selected.
*'''Cancel''' – Cancels any changes and exits the ''2D Cross Section Wizard'' dialog.
*''Image Registration Options'' section
 
**''Horizontal (X-Coordinate) registration option'' – Radio button. Select either "Use endpoints of section line" or "Use selected intermediate registration points".
==Cross Sections Panels, Panel Dividers, and Borelines==
*'''Next''' – Switches to the [[#Image Registration|second page]] of the ''Import XS2D Image Wizard'' dialog.
[[File:AHGW 2D Cross Section Wizard dialog Step 2.png|350px|thumb|right|The ''Step 2'' page of the ''2D Cross Section Wizard'' dialog]]
*'''Cancel''' – Cancels any changes and exits the ''Import XS2D Image Wizard'' dialog.
{{-}}
===Image Registration===
[[File:AHGW Import XS2D Image Wizard Step 2.png|350px|thumb|right|The ''Step 2'' page of the ''Import XS2D Image Wizard'' dialog]]
The following sections, options, and fields are available:
The following sections, options, and fields are available:
*''Image'' section – Displays the image entered in the ''Image file used for creating the XS2D Cross Section'' field of the previous page.
*''Cross Section Panels'' section – An optional path for ''Output panel feature class''. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Panel Features As'' dialog where a new feature class can be entered and saved. A default value will already be populated.
*''Coordinates'' section – Displays coordinates for the X left and right and Z top and bottom of the image.Only the ''Z Top'' and ''Z Bottom'' are editable.
*''Panel Dividers'' section – An optional path for ''Output panel divider feature class''. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Panel Divider Features As'' dialog where a new feature class can be entered and saved. A default value will already be populated.
*'''Back''' – Switches back to the [[#Cross Section Setup|first page]] of the ''Import XS2D Image Wizard'' dialog.
**''Maximum elevation to draw the panel divider'' – Enter a decimal maximum elevation value.
*'''Next''' – Switches to the [[#Cross Sections Panels and Panel Dividers|third page]] of the ''Import XS2D Image Wizard'' dialog.
**''Minimum elevation to draw the panel divider'' – Enter a positive or negative decimal minimum elevation value.
*'''Cancel''' – Cancels any changes and exits the ''Import XS2D Image Wizard'' dialog.
**'''Suggest Values by Reading Well Data''' – Click to populate the above two fields with suggested values based on the well data being used.
{{-}}
*''Borelines'' section – An optional path for ''Output boreline feature class''. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Boreline Features As'' dialog where a new feature class can be entered and saved. A default value will already be populated.
===Cross Sections Panels and Panel Dividers===
**''Create borelines from well and borehole log data'' – Select ''Yes'' or ''No''.
[[File:AHGW Import XS2D Image Wizard dialog Step 3.png|350px|thumb|right|The ''Step 3'' page of the ''Import XS2D Image Wizard'' dialog]]
*'''Back''' – Switches back to the [[#Cross Section Setup|first page]] of the ''2D Cross Section Wizard'' dialog.
The following sections, options, and fields are available:
*'''Next''' – Switches to the [[#Grid Lines|third page]] of the ''2D Cross Section Wizard'' dialog.
*''Cross Section Panels'' section
*'''Cancel''' – Cancels any changes and exits the ''2D Cross Section Wizard'' dialog.
**''Output panel feature class'' – An optional path. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Panel Features As'' dialog where a new feature class can be entered and saved.  
 
*''Panel Dividers'' section
==Grid Lines==
**''Output panel divider feature class'' – An optional path. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Panel Divider Features As'' dialog where a new feature class can be entered and saved.  
[[File:AHGW 2D Cross Section Wizard dialog Step 3.png|350px|thumb|right|The ''Step 3'' page of the ''2D Cross Section Wizard'' dialog]]
**''Maximum elevation to draw the panel divider'' – A decimal value for the maximum elevation at which to draw the panel divider.
**''Minimum elevation to draw the panel divider'' – A decimal value for the minimum elevation at which to draw the panel divider.
**'''Suggest Values Based on Image Registration''' – Click to populate the above two fields with suggested values based on the image registration being used.
*'''Back''' – Switches back to the [[#Image Registration|second page]] of the ''Import XS2D Image Wizard'' dialog.
*'''Next''' – Switches to the [[#Grid Lines|fourth page]] of the ''Import XS2D Image Wizard'' dialog.
*'''Cancel''' – Cancels any changes and exits the ''Import XS2D Image Wizard'' dialog.
{{-}}
===Grid Lines===
[[File:AHGW Import XS2D Image Wizard dialog Step 4.png|350px|thumb|right|The ''Step 4'' page of the ''Import XS2D Image Wizard'' dialog]]
The following sections, options, and fields are available:
The following sections, options, and fields are available:
*''Output major grid feature class'' – An optional path. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Major Grid Features As'' dialog where a new feature class can be entered and saved.
*''Output major grid feature class'' – An optional path. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Major Grid Features As'' dialog where a new feature class can be entered and saved. A default value will already be populated.
*''Output minor grid feature class'' – An optional path. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Minor Grid Features As'' dialog where a new feature class can be entered and saved.  
*''Output minor grid feature class'' – An optional path. Click [[File:Dot dot dot button.png|16px]] to bring up the ''Save Minor Grid Features As'' dialog where a new feature class can be entered and saved. A default value will already be populated.
*''Grid Extent'' section – Listed clockwise from the top:
*''Grid Extent'' section – Contains four fields, listed clockwise from the top, and a button:
**''Maximum elevation'' – Enter a decimal value for the maximum elevation.
**''Maximum elevation'' – A decimal value for the maximum elevation of the grid.
**''Right'' – Enter a decimal value for the right extent.
**''Right'' – A decimal value for the right extent of the grid.
**''Minimum elevation'' – Enter a decimal value for the minimum elevation.
**''Minimum elevation'' – A decimal value for the minimum elevation of the grid.
**''Left'' – Enter a decimal value for the left extent.
**''Left'' – A decimal value for the left extent of the grid.
**'''Suggest Extent Based on Image Registration''' – Click to populate the above four fields with suggested values based on the image registration being used.
**'''Suggest Extent by Reading Well Data''' – Click to populate the above four fields with suggested values based on the well data being used.
*''Grid Spacing'' section
*''Grid Spacing'' section
**''Horizontal distance between vertical major grid lines'' – Integer value.
**''Horizontal distance between vertical major grid lines'' – Decimal value.
**''Vertical distance between horizontal major grid lines'' – Integer value.
**''Vertical distance between horizontal major grid lines'' – Decimal value.
**''Number of minor grid lines between major vertical grid lines'' – Integer value.
**''Number of minor grid lines between major vertical grid lines'' – Integer value.
**''Number of minor grid lines between major horizontal grid lines'' – Integer value.
**''Number of minor grid lines between major horizontal grid lines'' – Integer value.
**'''Suggest Grid Spacing''' – Click to populate the above four fields with suggested grid spacing values.
**'''Suggest Grid Spacing''' – Click to populate the above four fields with suggested values based on the grid dimensions.
*'''Back''' – Switches back to the [[#Cross Sections Panels and Panel Dividers|third page]] of the ''Import XS2D Image Wizard'' dialog.
*'''Back''' – Switches back to the [[#Cross Sections Panels, Panel Dividers, and Borelines|second page]] of the ''2D Cross Section Wizard'' dialog.
*'''Finish''' – Saves the values and closes the ''Import XS2D Image Wizard'' dialog.
*'''Finish''' – Saves the values and closes the ''2D Cross Section Wizard'' dialog.
*'''Cancel''' – Cancels any changes and exits the ''Import XS2D Image Wizard'' dialog.
*'''Cancel''' – Cancels any changes and exits the ''2D Cross Section Wizard'' dialog.




{{Navbox AHGW}}
{{Navbox AHGW}}
[[Category:AHGW General Information]]
[[Category:AHGW General Information]]

Revision as of 22:04, 8 January 2024


The 2D Cross Section Wizard dialog is accessed by clicking AHGW XS2D Wizard Icon.png 2D Cross Section Wizard on the Arc Hydro Groundwater Toolbar. This tool helps create a new data frame in which to display a 2D cross section for the selected section line in ArcGIS.

There are three pages to this dialog:

  • Step 1: Cross Section Setup
  • Step 2: Cross Sections Panels, Panel Dividers, and Borelines
  • Step 3: Grid Lines

Cross Section Setup

The Step 1 page of the 2D Cross Section Wizard dialog

The following sections, options, and fields are available:

  • Section Line Properties section – Not user editable. Lists attributes of the selected section line.
  • Wells and Borehole Log section
    • Use well and borehole log data – Select Yes or No. Selecting "no" allows the user to proceed without selecting any wells.
    • Well layer – Select the desired layer from the drop-down.
      • Well unique ID field – Select the field to use as the well unique ID field. Default value is "HydroID".
    • Borehole log table – Select the desired table from the drop-down.
      • WellID field – Select the field to use as the WellID field. Default value is WellID.
    • Number of wells selected – Displays the quantity of wells selected. If no wells are selected, may display a warning to the right of the quantity value.
  • Cross Section Setup section
    • Vertical exaggeration – Enter a decimal value for the amount of vertical exaggeration in the display of the information.
    • XS2D Catalog Table – Select the table from the drop-down.
    • Default output workspace – Displays the absolute path to the output workspace. Click Dot dot dot button.png to bring up the Select Output Workspace dialog where a new output workspace can be created.
  • Next – Switches to the second page of the 2D Cross Section Wizard dialog.
  • Cancel – Cancels any changes and exits the 2D Cross Section Wizard dialog.

Cross Sections Panels, Panel Dividers, and Borelines

The Step 2 page of the 2D Cross Section Wizard dialog

The following sections, options, and fields are available:

  • Cross Section Panels section – An optional path for Output panel feature class. Click Dot dot dot button.png to bring up the Save Panel Features As dialog where a new feature class can be entered and saved. A default value will already be populated.
  • Panel Dividers section – An optional path for Output panel divider feature class. Click Dot dot dot button.png to bring up the Save Panel Divider Features As dialog where a new feature class can be entered and saved. A default value will already be populated.
    • Maximum elevation to draw the panel divider – Enter a decimal maximum elevation value.
    • Minimum elevation to draw the panel divider – Enter a positive or negative decimal minimum elevation value.
    • Suggest Values by Reading Well Data – Click to populate the above two fields with suggested values based on the well data being used.
  • Borelines section – An optional path for Output boreline feature class. Click Dot dot dot button.png to bring up the Save Boreline Features As dialog where a new feature class can be entered and saved. A default value will already be populated.
    • Create borelines from well and borehole log data – Select Yes or No.
  • Back – Switches back to the first page of the 2D Cross Section Wizard dialog.
  • Next – Switches to the third page of the 2D Cross Section Wizard dialog.
  • Cancel – Cancels any changes and exits the 2D Cross Section Wizard dialog.

Grid Lines

The Step 3 page of the 2D Cross Section Wizard dialog

The following sections, options, and fields are available:

  • Output major grid feature class – An optional path. Click Dot dot dot button.png to bring up the Save Major Grid Features As dialog where a new feature class can be entered and saved. A default value will already be populated.
  • Output minor grid feature class – An optional path. Click Dot dot dot button.png to bring up the Save Minor Grid Features As dialog where a new feature class can be entered and saved. A default value will already be populated.
  • Grid Extent section – Contains four fields, listed clockwise from the top, and a button:
    • Maximum elevation – A decimal value for the maximum elevation of the grid.
    • Right – A decimal value for the right extent of the grid.
    • Minimum elevation – A decimal value for the minimum elevation of the grid.
    • Left – A decimal value for the left extent of the grid.
    • Suggest Extent by Reading Well Data – Click to populate the above four fields with suggested values based on the well data being used.
  • Grid Spacing section
    • Horizontal distance between vertical major grid lines – Decimal value.
    • Vertical distance between horizontal major grid lines – Decimal value.
    • Number of minor grid lines between major vertical grid lines – Integer value.
    • Number of minor grid lines between major horizontal grid lines – Integer value.
    • Suggest Grid Spacing – Click to populate the above four fields with suggested values based on the grid dimensions.
  • Back – Switches back to the second page of the 2D Cross Section Wizard dialog.
  • Finish – Saves the values and closes the 2D Cross Section Wizard dialog.
  • Cancel – Cancels any changes and exits the 2D Cross Section Wizard dialog.


Retrieved from "https://www.xmswiki.com/index.php?title=AHGW:2D_Cross_Section_Wizard&oldid=161452"