User:Jcreer/SMS:ADCIRC Graphical Interface 13.1

The ADCIRC graphical interface includes tools to assist with creating, editing and debugging an ADCIRC model.

ADCIRC Simulation

Example of an ADCIRC simulation in the Project Explorer

Simulations are available for ADCIRC starting in SMS 13.0. A simulation should contain a 2D mesh and an ADCIRC boundary conditions coverage, and optional ADCIRC coverages. Right-clicking on the simulation will display options and dialogs.

To create a new simulation:

1. Right-click on empty space in the Project Explorer and select New Simulation | ADCIRC. A new tree item will appear.
2. Drag and drop simulation components under the newly created simulation tree item . Components available include:
   • 2D mesh
   • Boundary Conditions coverage
   • Recording Stations coverage
   • Pipes coverage
   • Wind Stations coverage

Multiple ADCIRC simulations can be included in a single project.

Simulation Components

An ADCIRC simulation uses the following components in the model run:

• 2D mesh – Any generic 2D mesh will work. Generally this mesh should be created from the Generic Mesh coverage.
• Boundary Conditions coverage – Contains arcs defining the boundary condition attributes for the model run.
• Recording Stations coverage – Allows creating recording stations at specified nodal locations.
• Pipes coverage – Allows creating cross barrier pipes.
• Wind Stations coverage –

Each component can be added to the simulation by selecting the component and dragging it under the simulation item in the Project Explorer. Linked 2D mesh and coverages will be displayed under the simulation.

Linking Components

After a simulation has been created, components may be added to the simulation. Components are usually added by clicking on the component item in the Project Explorer and dragging the item under the ADCIRC simulation. A link ( or ) is then created between the component and the simulation. If the component is updated, it is updated automatically in all simulations that are linked to it.

Components can also be added to a simulation by right-clicking on the component in the project explorer and selecting the simulation name in the Link To submenu. Similarly, components can be unlinked from a simulation by right-clicking on the component and selecting the simulation name in the Unlink From submenu. The Link To and Unlink From submenus become available once a simulation has been created.

Running the ADCIRC Simulation

After all components have been added to the simulation and the model parameters have been established, the simulation can be run. This is done by right-clicking on the simulation and choosing the Launch ADCIRC command or the Save, Export, and Launch ADCIRC command.

The simulation run involves three steps.

1. Exporting the ADCIRC files – SMS writes out an ADCIRC folder in the same directory where the SMS project is saved. The ADCIRC folder has several files which have mesh geometry information, and boundary conditions as well as model control information defined in the model.
2. Running ADCIRC – .

After using a launch command, the Simulation Run Queue dialog will appear. If there are any errors in the model run, the model wrapper will exit early. The model run can also be exited early by clicking the Abort button. When the model run is completed, select Exit to close the model wrapper.

The Load solution button appears with the model run has finished. Clicking this button will load the solution into SMS.

ADCIRC Menus

ADCIRC makes use of a number of right-click menus found on the ADCIRC simulation items and coverages in the Project Explorer. See ADCIRC Menu for more information.

ADCIRC Map Coverages

ADCIRC makes use of map coverage to define certain features and components for the ADCIRC model run. Available coverage types include:

• Boundary Condition
• Recording Stations
• Pipes
• Wind Stations

Boundary Conditions

All numeric models require boundary condition data. The ADCIRC boundary condition coverage is used to apply boundary condition data to the simulation.

Model Control

The ADCIRC Model Control dialog is used to setup the options that apply to the simulation as a whole. These options include time controls, run types, output options, global parameters, print options and other global settings.

Related Topics

• Boundary Types
• Boundary Conditions – tidal forcing
• Coverage
• Linear Truncation Error Analysis (LTEA)
• Meshes
• Model Control
• Spatial Attributes
• Steering