SMS:1D River Conceptual Model: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 15: Line 15:
[[Category:SMS Map|1]]
[[Category:SMS Map|1]]
[[Category:SMS 1D River|1]]
[[Category:SMS 1D River|1]]
[[Category:Conceptual Model|1]]

Revision as of 23:20, 6 February 2014

SMS uses a conceptual model (coverages of centerlines, and cross-sections) to define the hydraulic model, but at some point this conceptual model must be mapped to an equivalent topologic model representation for a Hydraulic model. HEC-RAS, for example, is defined as reaches and cross sections. Each reach and section has appropriate stationing defined from the spatial nature of the conceptual model. When choosing this command a schematic of the river is made for the appropriate model. The example below shows the reach (small boxes at the beginning of each reach) and section icons of the schematic for an HEC-RAS model. In the Hydraulic Modeling module the schematic is generally used as the view of the model.

River Conceptual Model.jpg


Related Topics