SMS:CMS-Flow/CMS-Wave Steering: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 17: Line 17:
== Related Topics ==
== Related Topics ==
* [[SMS:Steering|Steering]]
* [[SMS:Steering|Steering]]
* [[SMS:CMS-Flow|CMS-Flow]]
* [[SMS:CMS-Wave|CMS-Wave]]





Revision as of 15:06, 23 May 2013

Steering Wizard – CMS-Flow ↔ CMS-Wave dialog

Steering CMS INLINE page – Provides the ability to perform CMS-FLOW ↔ CMS-WAVE steering with data stored in memory. The steering is controlled by the cms-flow model executable and not by SMS.

  • CMS-FLOW Source Grid option – Select the cms-flow grid to be used in the steering.
  • CMS-WAVE Source Grid option – Select the cms-wave grid to be used in the steering.
  • Time options – Select the time parameters from the cms-flow model control interface.
    • Total Simulation Time:
    • CMS-Flow Time Control – this button opens the CMS-Flow Model Control dialog.
    • Run CMS-Wave every: – this field lets the intervals in which SMS will run CMS-Wave
  • CMS-FLOW → CMS-WAVE options – Disabled. These options are set in the cms-flow model executable.
    • Current Field
    • Water Surface Elevation
  • CMS-WAVE → CMS-FLOW options – Disabled. These options are set in the cms-flow model executable.
    • Wave Data
      • Zero extrapolation
      • Extrapolate Out – selecting this option causes the Distance field to become active where the distance can be specified.

Related Topics