Search results

*'''Grid Geometry''' – This section specifies the origin, orientation and size of the grid. The fields of these quantities are popu ...tion specifies the number of cells in each direction in the grid. Several options are available. Specify sizes in the I (Delta U) and J (Delta V) directions

* X, Y origin ...dicating that spectra will be coming from a parent grid and the associated options and spectral sites buttons become enabled. If an option is selected that i

...S:Mesh Generation|Mesh Generation]] for more information about the meshing options available in SMS. * ''Start time'' – Time origin of the run. EFDC.inp card 8.2

...dragging the WAM grids you want to use into each WAM simulation. There are options specific to each grid in a simulation as well as the simulation as a whole *'''Model Control''' – Brings up the [[SMS:WAM Grid Options|''Grid Options'']] dialog for WAM.

* Options are CMS-2D, CMS-3D, ADCIRC, M2D and CH3D Default value is ADCIRC. * Options are ADCIRC, CMS-2D (for M2D), CMS-3D (for M3D) and CH3D. Default value is A

...ters'' tab of the CMS-Wave ''Model Control'' dialog contains the following options: ...currents for the simulation. Click '''Select''' to select from the dataset options in a dialog.

...roceed to the next step. However, it is often useful to explore the other options for fitting the curves. ...ies and frequencies. These values are stored in arrays that correspond to options #2 and #3 in the ''Markov Chains'' section of the dialog.

:[[WMS:Local Origin Dialog|Local Origin Dialog]] ;3.3. The Display Options

...th functional surfaces not displaying correctly after changing the display options. # SMS now correctly uses external files specified in the TUFLOW grid options dialog

:[[WMS:Local Origin Dialog|Local Origin Dialog]] ;3.3. The Display Options

...lected items depending on the settings find through the ''File'' | '''Info Options''' command in the [[SMS:File Menu|''File'' menu]]. ...lected items depending on the settings find through the ''File'' | '''Info Options''' command in the [[SMS:File Menu|''File'' menu]].

* [[SMS:Data Transform|Transform]] the mesh so it is close to the origin (0,0). Large x, y coordinates can be problematic for FESWMS. ...f numerical parameters. The parameters define the boundary conditions and options pertinent to the model.

#Fixed a problem in saving the contour options for a dataset. These were not being preserved from one session to the next #In CMS-Flow the grid is automatically oriented so the origin is in the lower left. This was not working properly and has been fixed.

##Display Options ##* New Contour label display options

*'''Display Options''' **8126 - 10.0 - LPF options not reading back in for MODFLOW-USG model