Difference between revisions of "User:Jcreer/SMS:SRH-2D Plots"

From XMS Wiki
Jump to navigationJump to search
Line 3: Line 3:
  
 
The command brings up the "SRH-2D Solution Plots" dialog. which allows the user to select from a list of solution plots which include:
 
The command brings up the "SRH-2D Solution Plots" dialog. which allows the user to select from a list of solution plots which include:
      Monitor point water level -vs- time (1 for each monitor point in the simulation )
+
*      Monitor point water level -vs- time (1 for each monitor point in the simulation )
      Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
+
*    Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
      Monitor line flux vs time (1 for each monitor line in the simulation)
+
*      Monitor line flux vs time (1 for each monitor line in the simulation)
      Net Q -vs- time (percentage of flow entering the simulation that leaves the simulation at a given time)
+
*      Net Q -vs- time (percentage of flow entering the simulation that leaves the simulation at a given time)
              -100% means all the flow that entered the simulation at this time stayed in the simulation
+
**              -100% means all the flow that entered the simulation at this time stayed in the simulation
              0% means the same amount of flow exited during this time step as entered
+
**              0% means the same amount of flow exited during this time step as entered
              >0% means more flow left the simulation than entered it.
+
**              >0% means more flow left the simulation than entered it.
      Mass loss -vs- time
+
*      Mass loss -vs- time
      Average Mass loss -vs- time
+
*      Average Mass loss -vs- time
  
 
   The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simutaion.
 
   The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simutaion.

Revision as of 22:25, 22 July 2020


The command brings up the "SRH-2D Solution Plots" dialog. which allows the user to select from a list of solution plots which include:

  • Monitor point water level -vs- time (1 for each monitor point in the simulation )
  • Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
  • Monitor line flux vs time (1 for each monitor line in the simulation)
  • Net Q -vs- time (percentage of flow entering the simulation that leaves the simulation at a given time)
    • -100% means all the flow that entered the simulation at this time stayed in the simulation
    • 0% means the same amount of flow exited during this time step as entered
    • >0% means more flow left the simulation than entered it.
  • Mass loss -vs- time
  • Average Mass loss -vs- time
 The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simutaion.
 When a user selects a plot from the list (in a list widget on the left of the dialot), the selected plot appears in a window on the right side of the dialog.