Difference between revisions of "User:Jcreer/SMS:SRH-2D Plots"

From XMS Wiki
Jump to navigationJump to search
Line 2: Line 2:
 
{{Version SMS 13.2}}
 
{{Version SMS 13.2}}
 
[[File:SRH-2D SolutionPlots.png|thumb|450 px|Example of the ''SRH-2D Solution Plots'' dialog]]
 
[[File:SRH-2D SolutionPlots.png|thumb|450 px|Example of the ''SRH-2D Solution Plots'' dialog]]
In the SRH-2D simulation right-click menu, using the ''Tools'' | '''Solution Plots''' command brings up the ''SRH-2D Solution Plots'' dialog. which allows the user to select from a list of solution plots which include:
+
In the SRH-2D simulation right-click menu, using the ''Tools'' | '''View Simulation Plots''' command brings up the ''SRH-2D Solution Plots'' dialog. This dialog provides a list of solution plots. The list of available plots in on the left side of the dialog. Once a plot is selected from the list, the plot will be shown in the plot window on the right side of the dialog.
 +
 
 +
Available plots include:
 
*      Monitor point water level -vs- time (1 for each monitor point in the simulation )
 
*      Monitor point water level -vs- time (1 for each monitor point in the simulation )
 
*    Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
 
*    Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
 
*      Monitor line flux vs time (1 for each monitor line in the simulation)
 
*      Monitor line flux vs time (1 for each monitor line in the simulation)
*     Net Q -vs- time (percentage of flow entering the simulation that leaves the simulation at a given time)
+
* ''Net_Q/INLET_Q'' –    Net Q -vs- time, percentage of flow entering the simulation that leaves the simulation at a given time:
 
**              -100% means all the flow that entered the simulation at this time stayed in the simulation
 
**              -100% means all the flow that entered the simulation at this time stayed in the simulation
 
**              0% means the same amount of flow exited during this time step as entered
 
**              0% means the same amount of flow exited during this time step as entered

Revision as of 18:51, 21 August 2020

Example of the SRH-2D Solution Plots dialog

In the SRH-2D simulation right-click menu, using the Tools | View Simulation Plots command brings up the SRH-2D Solution Plots dialog. This dialog provides a list of solution plots. The list of available plots in on the left side of the dialog. Once a plot is selected from the list, the plot will be shown in the plot window on the right side of the dialog.

Available plots include:

  • Monitor point water level -vs- time (1 for each monitor point in the simulation )
  • Monitor point ground level -vs- time (1 for each monitor point in the simulation - not meaningful unless the simulation includes sediment transport)
  • Monitor line flux vs time (1 for each monitor line in the simulation)
  • Net_Q/INLET_Q – Net Q -vs- time, percentage of flow entering the simulation that leaves the simulation at a given time:
    • -100% means all the flow that entered the simulation at this time stayed in the simulation
    • 0% means the same amount of flow exited during this time step as entered
    • >0% means more flow left the simulation than entered it.
  • Mass loss -vs- time
  • Average Mass loss -vs- time

The dialog also allows the user to specify the time range of the plot to be viewed. The possible range will be 0 to the length (time in hours) of the simulation.

When a user selects a plot from the list (in a list widget on the left of the dialog), the selected plot appears in a window on the right side of the dialog.