GMS:Plot Window Workflow

Using the Plot Wizard plots can be generated by doing the following:

1. Load solution files.
The solution should load automatically assuming the Load Solution option was checked in the model wrapper before exiting the model run. If loading the solution separately from the model run, open the solution file generated from model run.

2. Create an observation coverage.
Create a new coverage with the "Observation" type. Use the New Coverage right-click command. Use the Coverage Setup dialog to create a new coverage by selecting the desired coverage properties and naming the coverage.

3. Create observation points in the observation coverage.

1. Create feature points, arcs, nodes and vertices. In the map module, create feature objects in the active coverage. Use the Create Arc tool to create arcs in the map coverage. Begin creating a new arc by clicking in the graphics window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object. Double-click or press the Enter key to terminate the arc. Use the Create Point tool to create additional nodes alone or to split arcs. 2. Modify arcs. Feature arcs, whether digitized or incorporated from a boundary condition or a material coverage, often need to be edited after initial creation. 1. Create additional vertices on arcs. Use the Create Vertex tool to add vertices along arcs. 2. Refine the arc shape. Use the Select Vertices tool and the Select Points\Nodes tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices. Use the Select Arcs tool to move entire arcs . 3. Split arcs. An existing arc can be split by: 1. Converting a vertex to a node. Use the Select Vertices tool. Select the Feature Objects | Vertices → Nodes command to split the arc into two arcs. 2. Add a node to the arc. Use the Create Point tool to add a node on an arc in order to split it into two arcs. 3. Connect the end of an existing arc to the middle of the arc. Use the Select Points\Nodes tool to drag the node of an existing arc to anywhere in the middle of another arc. This will split the second arc into two arcs. 4. Add a new connecting arc. Use the Create Arc tool to start or end a new arc on an existing arc to split the existing arc into two arcs. 5. Split overlapping arcs using the Clean Options dialog. Select overlapping arcs using the Select Arcs tool. Use the Feature Objects | Clean command to bring up the Clean Options dialog. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs. 4. Merge arcs. Two arcs that share an end node can be merged together. Select the shared node using the Select Points\Nodes tool. Click on the Feature Objects | Nodes → Vertices menu command to merge the arcs. If desired, the Select Vertices tool can be used to select and delete the new vertex. 5. Transform arcs. Select the arc using the Select Arcs tool. Use the Edit | Transform command. Use the Transform dialog to scale, translate or rotate the arc.

4. Add observation point attributes.
With the Select Point/Node tool, right-click on the observation point and select the Attribute Table command. Set the observation attributes in the Attributes Table dialog.

5. Use the Plot Wizard to generate plot type.

The Plot Wizard to generate one of the following plot types: 1. Start the plot wizard. Select the Display | Plot Wizard menu command. Note that some plots require an observation coverage exist in the project. 2. Select available plot type. 1. Computed vs. Observed Data plots. 1. Computed vs. Observed Data. Select Display | Plot Wizard to start the Plot Wizard. Select the "Computed vs. Observed Data" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 2. Computed vs. Observed Data (Weighted). Select Display | Plot Wizard to start the Plot Wizard. Select the "Computed vs. Observed Data (Weighted)" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 2. Residual vs. Observed Data plots. 1. Residual vs. Observed Data. Select Display | Plot Wizard to start the Plot Wizard. Select the "Residual vs. Observed" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 2. Residual vs. Observed Data (Weighted). Select Display | Plot Wizard to start the Plot Wizard. Select the "Residual vs. Observed (Weighted)" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 3. Parameter Sensitivity plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "Parameter Sensitivity" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 4. Error vs. Simulation plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "Error vs. Simulation" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 5. Error vs. Time Step plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "Error vs. Time Step" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 6. Error Summary plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "Error Summary" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 7. Time Series plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "Time Series" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 8. Active Dataset Time Series plot. Select a dataset in Project Explorer. Select cells in the project. Select Display | Plot Wizard to start the Plot Wizard. Select the "Active Dataset Time Series" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 9. S/S Flow vs. Time plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "S/S Flow vs. Time" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 10. Flow Budget vs. Time plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "Flow Budget vs. Time" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window. 11. Gage Package Value vs. Time plot. Select Display | Plot Wizard to start the Plot Wizard. Select the "Gage Package Value vs. Time" option on the left and click Next. Specify plot options in step 2 of the Plot Wizard then click Finish. Review plot window.