GMS:Redistribute Layers: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
*''Specify bottom elevation'' – Designates a constant bottom elevation for the grid. | *''Specify bottom elevation'' – Designates a constant bottom elevation for the grid. | ||
The layer thickness table lists all available layers and allows editing the relative thicknesses of each grid layer. It has the following options. | The layer thickness table lists all available layers and allows editing the relative thicknesses of each grid layer. It has the following options. | ||
*''Edit'' – Option must be checked to change the thickness of the layer. GMS requires that at least one layer not be selected as the thickness for this layer will automatically be calculated. | *''Edit'' – Option must be checked to change the thickness of the layer. GMS requires that at least one layer not be selected as the thickness for this layer will automatically be calculated. If multiple layers are left unselected, GMS will even distribute the remaining layer thickness between the unselected layers. | ||
*''Fraction'' – Changes the thickness of the layer by the percentage value entered. The value needs to be a positive value between 0.01 and 0.99. GMS will automatically adjusts the fraction value of other layers so the total equals 1 (100%). | *''Fraction'' – Changes the thickness of the layer by the percentage value entered. The value needs to be a positive value between 0.01 and 0.99. GMS will automatically adjusts the fraction value of other layers so the total equals 1 (100%). | ||
