GMS:Toolbars

There are several toolbars that can be displayed in the GMS interface. Below are the toolbars that are on by default.

Basic Macros

Some of the more frequently used menu commands can be accessed through the macro buttons.

File Menu Macros

The following File menu commands appear as macros on this toolbar:

• New – Resets settings to the defaults and creates a new untitled project.
• Open – Brings up the Open dialog and allows an existing project or other file to be imported into GMS.
• Save – Brings up the Save As dialog. It allows the current project to be saved as a GPR file and a variety of other formats.
• Print – Brings up the Print dialog, allowing the contents of the Graphics Window to be printed to any printer supported by Windows.

Display View Macros

The following Display menu commands appear as macros in this toolbar. They can also be accessed by selecting either Display or Display | View and selecting the desired tool.

• Plan View File:PlanView.PNG – Changes the view to a top-down display, like on a blueprint.
• Front View File:FrontView.PNG – Changes the view to a front elevation display.
• Side View File:SideView.PNG – Changes the view to a side elevation display.
• Oblique View File:Oblique View icon in GMS.png – Changes the view to a 3D perspective.
• Ortho Mode File:OrthoView.PNG – Changes to an orthagonal, or layer, view. This is only available when using the 3D Grid.
• Frame Image – Brings all the project extents within the boundaries of the Graphics Window.

Other Macros

The following Display and Edit menu commands appear as macros in this toolbar. They can also be accessed by selecting either Display or Edit and selecting the desired tool.

• Display Options – Brings up the Display Options dialog.
• Properties File:GMS Properties macro icon.png – Brings up the Properties dialog for the selected element.
• Refresh Display – Refreshes the Graphics Window.
• Use Light Source – Toggles on or off the Lighting Options. The settings are accessible through the Display Options dialog (see above).
• Plot Wizard – Brings up the Plot Wizard dialog.
• Contour Options – Brings up the Contour Options dialog.
• Data Calculator – Brings up the Data Calculator dialog.
• Materials – Brings up the Materials dialog.
• Add Online Maps – Brings up the Get Online Maps dialog.
• Map Locator – Brings up the Virtual Earth Map Locator dialog.

Display Visibility Macros

The following Display menu commands appear as macros in this toolbar. They can also be accessed by selecting Display | Visibility and selecting the desired tool.

• Hide File:GMS Hide macro icon.png – Toggles off the visibility of the selected elements.
• Show File:GMS Show macro icon.png – Toggles on the visibility of the selected elements.
• Isolate File:GMS Isolate macro icon.png – Toggles off the visibility of all but the selected elements.

Contextual Macros

These macros appear or disappear according to which options and models are enabled or disabled.

Map To Macros

Includes commands for building polygons, running models, and for the mapping feature objects to geometric objects or numerical models. The available macros will change depending on the available data and project setup.

• Build Polygons File:Build Polygons macro icon.png – Creates polygons out of closed arcs.
• Map to TIN File:Map to TIN macro icon.png – Creates a TIN using each polygon in the coverage.
• Map to 2D Mesh File:Map to 2D Mesh macro icon.png – Creates a 2D Mesh on the interior of all of the polygons in the current coverage.
• Map to 3D Grid File:Map to 3D Grid macro icon.png – Opens the Create Grid dialog.
• Map to UGrid File:Map to UGrid macro icon.png – Creates a UGrid from feature objects.
• Map to 2D Scatter File:Map to 2D Scatter Points macro icon.png – Creates a scatter point set from the points and nodes and vertices of the current coverage.
• Map to MODFLOW File:Map to MODFLOW macro icon.png – Converts a conceptual model to a MODFLOW numerical model.
• Map to FEMWATER File:Map to FEMWATER macro icon.png – Converts a conceptual model to a FEMWATER numerical model.
• Map to MT3DMS File:Map to MT3DMS macro icon.png – Converts a conceptual model to a MT3DMS numerical model.
• Map to SEEP2D File:Map to SEEP2D macro icon.png – Converts a conceptual model to a SEEP2D numerical model.
• Run MODFLOW File:Run MODFLOW macro icon.png – Initiates the MODFLOW executable.
• Run MODPATH File:Run MODPATH macro icon.png – Initiates the MODPATH executable.
• Run FEMWATER File:Run FEMWATER macro icon.png – Initiates the FEMWATER executable.
• Run MODAEM File:Run MODAEM macro icon.png – Initiates the MODAEM executable.
• Run MT3DMS File:Run MT3DMS macro icon.png – Initiates the MT3DMS executable.
• Run SEAWAT File:Run SEAWAT macro icon.png – Initiates the SEAWAT executable.
• Run SEEP2D File:Run SEEP2D macro icon.png – Initiates the SEEP2D executable.
• Run UTEXAS File:Run UTEXAS macro icon.png – Initiates the UTEXAS executable.

Tools

Static Tools

The Static Tools contain the tools which are available in every module. These tools are for basic operations such as panning and zooming. Only one tool is active at any given time. The action that takes place when clicking in the Graphics Window depends on the current tool. The following table describes the tools in the Static Tools.

Tool	Tool Name	Description
	Pan	The Pan tool is used to pan the viewing area of the Graphics Window. Panning can be done in 3 ways: When the Pan tool is active, holding down the main mouse button while dragging moves the view. If another tool is active and not wanting to switch tools, pan by holding down the F2 key and clicking and dragging with the mouse. If the mouse has a middle button (or a mouse wheel), hold it down and drag to pan the view.
	Zoom	The viewing area can be magnified/shrunk using the Zoom tool. Zooming can be done in the following ways: With the zoom tool selected, clicking on the screen zooms the display in around the point by a factor of two. Holding down the SHIFT key zooms out. With the zoom tool selected, a rectangle can be dragged around a portion of the display to zoom in on that region. Holding down the SHIFT key zooms out. If another tool is active and not wanting to switch tools, zoom by holding down the F3 key and clicking and dragging with the mouse. If the mouse has a mouse wheel, scroll the wheel to zoom in and out.
	Rotate	The Rotate tool provides a quick way to rotate the viewing location. Rotating can be done in the following ways: With the rotate tool selected, holding down the mouse button and dragging the cursor in the Graphics Window rotates the object in the direction specified. A horizontal movement rotates the image about the z axis. A vertical movement rotates the image about the x and y axis. If another tool is active and not wanting to switch tools, rotate by holding down the F4 key and clicking and dragging with the mouse. (The viewing angle can also be entered directly via the View Angle command in the Display Menu.)
File:Measure tool.png	Measure	The Measure tool provides a quick way to measure distances. The tool is only available in plan view. Measuring is done by selecting the tool and clicking on the Graphics Window with the mouse. A single line or a polyline can be created with a double-click used to end the line. The backspace key removes the last point clicked. The distance from the last point and the total length are given at the bottom of the GMS window. The length units correspond to those selected in the Units dialog.
	Get Data	The Get Data Tool is used to specify the location of interest for obtaining data using the import from web feature. Click and drag in the main graphics window to specify the area to be downloaded. The Data Service Options dialog will then appear and the web service or catalog can be selected for downloading the data. SMS will ask to save the data file before downloading the data and importing it into SMS. The data will appear in the GIS module. This tool is not available if a display projection has not been specified. The tool will determine the data location based on the display projection.

Dynamic Tools

When the active module is changed, the tools in the Dynamic Tools change to the set of tools associated with the selected object/module.

Mini-Grid Toolbar

The Mini-Grid Toolbar appears when a 3D grid exists and when the orthogonal viewing mode is active. In the orthogonal mode, the viewing angle is always parallel to one of the three grid axes (I, J, or K) and only one of the rows, columns, or layers is displayed at one time. The Mini-Grid Toolbar shows an idealized representation of the 3D grid and shows which of the rows, columns, or layers is currently being displayed. The current row, column, or layer can be changed using the arrows on the Mini-Grid Toolbar.

Modules

The Modules toolbar is used to switch between modules. Only one module is active at any given time. Activating a module simply changes the set of available tools and menu commands.

See also

• GMS Window