GMS:Creating a TIN: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(11 intermediate revisions by 2 users not shown)
Line 2: Line 2:
In order to create a TIN in GMS, there must be a set of TIN vertices. Then the TIN is created by triangulating the vertices (connecting the vertices with lines to form triangles). The [[GMS:Triangulation|triangulation]] algorithm assumes that each of the vertices being triangulated is unique in the xy plane, i.e., no two points have the same xy location. Duplicate points can be removed by selecting '''Find Duplicates''' from the  ''TINs'' menu.
In order to create a TIN in GMS, there must be a set of TIN vertices. Then the TIN is created by triangulating the vertices (connecting the vertices with lines to form triangles). The [[GMS:Triangulation|triangulation]] algorithm assumes that each of the vertices being triangulated is unique in the xy plane, i.e., no two points have the same xy location. Duplicate points can be removed by selecting '''Find Duplicates''' from the  ''TINs'' menu.


TINs can be created 3 different ways in GMS: manually entering the vertex locations and triangulating, converting a different GMS data type to a TIN, and copying a currently existing TIN.
TINs can be created three different ways in GMS: manually entering the vertex locations and triangulating, converting a different GMS data type to a TIN, and copying a currently existing TIN.


=== Manually Creating a TIN ===
=== Manually Creating a TIN ===
Line 17: Line 17:
[[GMS:2D Mesh Module|2D meshes]], [[GMS:2D Grid Module|2D grids]], and [[GMS:2D Scatter Point Module|2D scatter points]] can all be converted to a TIN. This is accomplished by using the following commands:
[[GMS:2D Mesh Module|2D meshes]], [[GMS:2D Grid Module|2D grids]], and [[GMS:2D Scatter Point Module|2D scatter points]] can all be converted to a TIN. This is accomplished by using the following commands:


*[[GMS:2D Mesh Module#Converting a 2D Mesh to other types of Data|Mesh to TIN]]
;[[GMS:Converting_a_2D_Mesh_to_Other_Types_of_Data#Mesh_.E2.86.92_TIN|Mesh to TIN]] : A triangle is created from each triangular element in the mesh.
*[[GMS:2D Grid Module#Converting 2D Grids|Grid to TIN]]
;[[GMS:Converting_2D_Grids#Grid_.E2.86.92_TIN|Grid to TIN]] : Creates a new TIN from the selected 2D grid.
*[[GMS:2D Scatter Point Module#Converting 2D Scatter Points to Other Types of Data|Scatter Points to TIN]]  
;[[GMS:Converting 2D Scatter Points to Other Types of Data|Scatter Points to TIN]] : Creates a set of TIN vertices.
*[[GMS:Converting Borehole Data|Contacts to TIN]]
;[[GMS:Converting Borehole Data|Contacts to TIN]] : Creates a TIN surface from a set of selected contacts.
*[[GMS:Converting Borehole Data|Watertable to TIN]]
;[[GMS:Converting Borehole Data|Watertable to TIN]] : Uses water table coordinates from a set of boreholes to converted to TIN.
*'''Add Contacts to TIN''' – This command is used to enter a point from a contact into the active TIN . The contact(s) are first selected and the command is then chosen from the ''Borehole'' menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later.
;Add Contacts to TIN : This command is used to enter a point from a contact into the active TIN . The contact(s) are first selected and the command is then chosen from the ''Borehole'' menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later.


=== Copying a Current TIN ===
=== Copying a Current TIN ===
Line 28: Line 28:


#Select the TIN to be copied using the '''Select TINs''' tool.
#Select the TIN to be copied using the '''Select TINs''' tool.
#Select the '''Duplicate TIN''' command from the ''TINs'' menu. A dialog appears prompting for the Z-offset of the new TIN. The Z offset is used to displace the TIN above or below the TIN being duplicated.
#Select the '''Duplicate TIN''' command from the right-click menu. A dialog appears prompting for the Z-offset of the new TIN. The Z offset is used to displace the TIN above or below the TIN being duplicated.
 


{{Navbox GMS}}
{{Navbox GMS}}
[[Category:TINs]]
[[Category:TINs]]
{{stub}}

Latest revision as of 17:19, 28 November 2017

TIN Module
Tins.png
TINs
Creating a TIN
Editing a TIN
Converting TINS to Other Data Types
Building Solids and 3D Meshes with TINs
Map to MODFLOW with TINs
More
TIN Settings
TIN Display Options
TIN Tool Palette
TIN Commands
TIN Files
v • e

In order to create a TIN in GMS, there must be a set of TIN vertices. Then the TIN is created by triangulating the vertices (connecting the vertices with lines to form triangles). The triangulation algorithm assumes that each of the vertices being triangulated is unique in the xy plane, i.e., no two points have the same xy location. Duplicate points can be removed by selecting Find Duplicates from the TINs menu.

TINs can be created three different ways in GMS: manually entering the vertex locations and triangulating, converting a different GMS data type to a TIN, and copying a currently existing TIN.

Manually Creating a TIN

A TIN can be created manually from the following steps:

  1. Right-click in the empty space of the Project Explorer and select the New → TIN command.
  2. Select the Create Vertices tool from the TIN Tool Palette.
  3. Create the vertices by clicking inside the Graphics Window at the xy coordinates where the vertex is to be located. (To change the vertex location see: Editing a TIN)
  4. Select the Triangulate command from the TINs menu.

Creating a TIN from GMS Data

2D meshes, 2D grids, and 2D scatter points can all be converted to a TIN. This is accomplished by using the following commands:

Mesh to TIN
A triangle is created from each triangular element in the mesh.
Grid to TIN
Creates a new TIN from the selected 2D grid.
Scatter Points to TIN
Creates a set of TIN vertices.
Contacts to TIN
Creates a TIN surface from a set of selected contacts.
Watertable to TIN
Uses water table coordinates from a set of boreholes to converted to TIN.
Add Contacts to TIN
This command is used to enter a point from a contact into the active TIN . The contact(s) are first selected and the command is then chosen from the Borehole menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later.

Copying a Current TIN

To make a copy of a TIN that currently exists in GMS follow these steps:

  1. Select the TIN to be copied using the Select TINs tool.
  2. Select the Duplicate TIN command from the right-click menu. A dialog appears prompting for the Z-offset of the new TIN. The Z offset is used to displace the TIN above or below the TIN being duplicated.


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:Creating_a_TIN&oldid=132883"