GMS:Converting Borehole Data: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Boreholes links}} | {{Boreholes links}} | ||
Borehole data can be converted to other types of objects with in GMS such as 2D | Borehole data can be converted to other types of objects with in GMS such as 2D scatter points, TINs, or 3D meshes. Borehole data is converted by using the following commands in the [[GMS:Borehole Commands|''Boreholes'' menu]]: | ||
; [[GMS:Horizons to Solids|Horizons to Solids]] : | ; [[GMS:Horizons to Solids|Horizons to Solids]] : | ||
| Line 9: | Line 9: | ||
; Sample Data to 3D Scatter Points: Brings up the ''Sample Data → Scatter Points'' dialog that is used to create a 3D scatter point set from sample data. | ; Sample Data to 3D Scatter Points: Brings up the ''Sample Data → Scatter Points'' dialog that is used to create a 3D scatter point set from sample data. | ||
; Sample Data to Stratigraphy : Opens the ''Sample Data → Stratigraphy'' dialog that allows defining stratigraphy (borehole contacts) based on the sample data. | ; Sample Data to Stratigraphy : Opens the ''Sample Data → Stratigraphy'' dialog that allows defining stratigraphy (borehole contacts) based on the sample data. | ||
; Watertable to 2D Scatter Points : The water table coordinates for a set of boreholes can be converted to a 2D scatter point set using the '''Water Table → 2D Scatter Points''' command. | ; Watertable to 2D Scatter Points : The water table coordinates for a set of boreholes can be converted to a 2D scatter point set using the '''Water Table → 2D Scatter Points''' command. A dialog will apear asking to assign a name to the new scatter set before the conversion is completed. | ||
; Add Contacts to TIN : Used to enter a point from a contact into the active TIN. The contact(s) are first selected and the command is then chosen from the ''Borehole'' menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later. | ; Add Contacts to TIN : Used to enter a point from a contact into the active TIN. The contact(s) are first selected and the command is then chosen from the ''Borehole'' menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later. | ||
