GMS:Converting Borehole Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
No edit summary
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Boreholes links}}
{{Boreholes links}}
Borehole data can be converted to other types of objects with in GMS such as 2D Scatter Points, TINs, 3D Meshes. Borehole data is converted by using the following commands in the Boreholes menu:
Borehole data can be converted to other types of objects with in GMS such as 2D scatter points, TINs, or 3D meshes. Borehole data is converted by using the following commands in the [[GMS:Borehole Commands|''Boreholes'' menu]]:


*[[GMS:Horizons to Solids|Horizons to Solids]]
; [[GMS:Horizons to Solids|Horizons to Solids]] :
*[[GMS:Horizons to HUF|Horizons to HUF]]
; [[GMS:Horizons to HUF|Horizons to HUF]] :
*[[GMS:Horizons to 3D Mesh|Horizons to 3D Mesh]]
; [[GMS:Horizons to 3D Mesh|Horizons to 3D Mesh]] :
*Contacts to TIN
; Contacts to TIN : Used to create a [[GMS:TIN Module|TIN]] surface from a set of selected contacts.
:The '''''Contacts -> TIN''''' command is used to create a [[GMS:TIN Module|TIN]] surface from a set of selected contacts.
; Contacts to 2D Scatter Points : A set of selected contacts can be converted to a 2D scatter point set using the '''Contacts → 2D Scatter Points''' command.
*Contacts to 2D Scatter Points
; Sample Data to 3D Scatter Points: Brings up the ''Sample Data → Scatter Points'' dialog that is used to create a 3D scatter point set from sample data.
:A set of selected contacts can be converted to a 2D scatter point set using the '''''Contacts -> 2D Scatter Points''''' command.
; Sample Data to Stratigraphy : Opens the ''Sample Data → Stratigraphy'' dialog that allows defining stratigraphy (borehole contacts) based on the sample data.
*Sample Data to 3D Scatter Points
; Watertable to 2D Scatter Points : The water table coordinates for a set of boreholes can be converted to a 2D scatter point set using the '''Water Table → 2D Scatter Points''' command. A dialog will apear asking to assign a name to the new scatter set before the conversion is completed.
:The '''''Sample Data -> 3D Scatter Points''''' command brings up the Sample Data -> Scatter Points dialog that is used to create a 3D scatter point set from sample data.
; Add Contacts to TIN : Used to enter a point from a contact into the active TIN. The contact(s) are first selected and the command is then chosen from the ''Borehole'' menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later.
*Sample Data to Stratigraphy
*Watertable to 2D Scatter Points
:The water table coordinates for a set of boreholes can be converted to a 2D scatter point set using the '''''Water Table -> 2D Scatter Points''''' command.
*Add Contacts to TIN
:The '''''Add Contacts to TIN''''' command is used to enter a point from a contact into the active TIN. The contact(s) are first selected and the command is then chosen from the '''''Borehole''''' menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later.




{{Navbox GMS}}
{{Navbox GMS}}
[[Category:Boreholes]]
[[Category:Boreholes]]

Latest revision as of 14:58, 24 October 2017

Boreholes Module
Holes1.png
Boreholes Links
Creating and Editing Boreholes
Borehole Hydrogeologic Units
Converting Borehole Data
More
Borehole Cross Sections
Borehole Display Options
Borehole Tool Palette
Borehole Commands
v • e

Borehole data can be converted to other types of objects with in GMS such as 2D scatter points, TINs, or 3D meshes. Borehole data is converted by using the following commands in the Boreholes menu:

Horizons to Solids
Horizons to HUF
Horizons to 3D Mesh
Contacts to TIN
Used to create a TIN surface from a set of selected contacts.
Contacts to 2D Scatter Points
A set of selected contacts can be converted to a 2D scatter point set using the Contacts → 2D Scatter Points command.
Sample Data to 3D Scatter Points
Brings up the Sample Data → Scatter Points dialog that is used to create a 3D scatter point set from sample data.
Sample Data to Stratigraphy
Opens the Sample Data → Stratigraphy dialog that allows defining stratigraphy (borehole contacts) based on the sample data.
Watertable to 2D Scatter Points
The water table coordinates for a set of boreholes can be converted to a 2D scatter point set using the Water Table → 2D Scatter Points command. A dialog will apear asking to assign a name to the new scatter set before the conversion is completed.
Add Contacts to TIN
Used to enter a point from a contact into the active TIN. The contact(s) are first selected and the command is then chosen from the Borehole menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later.


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:Converting_Borehole_Data&oldid=131230"