SMS:SRH-2D Menu: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(50 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The ''SRH'' menu becomes available when the SRH model has been created and is active. From the SRH menu, the specifics of the overall model are entered and the model is initiated. The SRH menu includes the following commands:  
The ''SRH-2D'' menu becomes available when the SRH-2D simulation has been created in a session of SMS. In previous versions of SMS, this menu appeared in the menu bar, but for version 12.0 and above, this menu is found by right-clicking on the SRH-2D simulation. From the SRH-2D menu, the specifics of the overall model are entered and the model is initiated. The SRH-2D menu includes the following commands:  
*'''Model Control''' – This command will bring up the [[SMS:SRH Model Control|SHR ''Model Control'']] dialog.
 
*'''Model Check'''  
; '''Simulation Run Queue''' : Opens the ''Simulation Run Queue'' dialog.
*'''Assign Monitor Points Coverage'''  
; '''Model Control...''' : This command will bring up the [[SMS:SRH-2D Model Control|SRH-2D ''Model Control'']] dialog.
*'''Export SRH''' – The Export SRH command tells SMS that it is time to write out the files that SRH needs to run. Note that the project must be saved before the files may be exported. The user will not see anything happen, but SMS uses the input information from the model control, the boundary conditions, and the materials data to create the files in preparation for SRH to work.  
; '''Generate Snap Preview''' : Will generate a preview of how map feature will snap to the mesh geometry during the simulation run. See the article [[SMS:Snapping#Snap_Preview_of_Feature_Objects_to_a_Geometry|Snap Preview of Feature Objects to a Geometry]]
*'''Launch SRH''' – When the model is ready and has been exported, it may be launched. Launching SRH initiates the powerful, robust hydraulic model. Upon successful completion of the launch, the analysis is complete and results are ready to be read and displayed by SMS.
; ''Tools'' : Contains a list of additional tools for post-processing the simulation.
*'''Save Export and Launch SRH''' – This is a combinination of the previous steps put together into one.
:*[[SMS:SRH-2D Advanced Simulation|'''Advanced Simulation (Beta)...''']]
:*[[SMS:SRH-2D_Plots#Simulation_Plots|'''View Simulation Plots''']]
:*'''Statistical Analysis (Beta)''' – For an advanced simulations, generates standard deviation, minimum, maximum, and mean datasets per time step for each dataset that is part of each solution. If the dataset has multiple time steps, then it computes it using all time steps. It will not provide additional statistics if the solution dataset only has one  time step.
:*[[SMS:SRH-2D Summary Report|'''Summary Report (Beta)...''']]
<!--:*[[SMS:SRH-2D Datasets to Rasters|'''Datasets to Rasters''']]-->
:*[[SMS:Floodway Tools|'''Generate Floodway Simulation (Beta)''']]
:*[[SMS:Floodway Tools|'''Generate Hydraulic Evaluation Lines (Beta)...''']]
:*[[SMS:Floodway Tools|'''Compare Simulation Data (Beta)...''']]
; '''Model Check...''' : This command will cause SMS to perform a check for invalid settings that could prevent SRH-2D from running properly. If errors are found, they will be reported in the [[SMS:Model Checker|''Model Check'']] dialog with information on how to correct them.
; '''Export...''' : Tells SMS that it is time to write out the files that SRH-2D needs to run. Note that the project must be saved before the files may be exported. The user will not see anything happen, but SMS uses the input information from the model control, the boundary conditions, and the materials data to create the files in preparation for SRH-2D to work.  
; '''Save All and Run''' / '''Save Simulation and Run''': When the model is ready and has been exported, it may be launched. [[SMS:SRH-2D Simulation#Running an SRH-2D Simulation|Launching SRH-2D]] initiates the powerful, robust hydraulic model. Upon successful completion of the launch, the analysis is complete and results are ready to be read and displayed by SMS.  
 
The SRH-2D simulation right-click menu also has [[SMS:Simulations#Simulation_Menu|general simulation commands]].
 
==Obsolete Commands==
The following commands are no longer available in current versions of SMS.
 
; '''Assign Monitor Points Coverage''' : Brings up the [[SMS:SRH-2D Coverages#Monitor Points Coverage|''Select the Monitor Point Coverage'']] dialog.


==Related Topics==
==Related Topics==
Line 11: Line 28:




{{Navbox SMS Menus}}
{{Navbox SMS}}
{{Navbox SMS}}
[[Category:SMS Menus|S]]
[[Category:SRH-2D|Menu]]

Latest revision as of 22:11, 20 December 2023

The SRH-2D menu becomes available when the SRH-2D simulation has been created in a session of SMS. In previous versions of SMS, this menu appeared in the menu bar, but for version 12.0 and above, this menu is found by right-clicking on the SRH-2D simulation. From the SRH-2D menu, the specifics of the overall model are entered and the model is initiated. The SRH-2D menu includes the following commands:

Simulation Run Queue
Opens the Simulation Run Queue dialog.
Model Control...
This command will bring up the SRH-2D Model Control dialog.
Generate Snap Preview
Will generate a preview of how map feature will snap to the mesh geometry during the simulation run. See the article Snap Preview of Feature Objects to a Geometry
Tools
Contains a list of additional tools for post-processing the simulation.
Model Check...
This command will cause SMS to perform a check for invalid settings that could prevent SRH-2D from running properly. If errors are found, they will be reported in the Model Check dialog with information on how to correct them.
Export...
Tells SMS that it is time to write out the files that SRH-2D needs to run. Note that the project must be saved before the files may be exported. The user will not see anything happen, but SMS uses the input information from the model control, the boundary conditions, and the materials data to create the files in preparation for SRH-2D to work.
Save All and Run / Save Simulation and Run
When the model is ready and has been exported, it may be launched. Launching SRH-2D initiates the powerful, robust hydraulic model. Upon successful completion of the launch, the analysis is complete and results are ready to be read and displayed by SMS.

The SRH-2D simulation right-click menu also has general simulation commands.

Obsolete Commands

The following commands are no longer available in current versions of SMS.

Assign Monitor Points Coverage
Brings up the Select the Monitor Point Coverage dialog.

Related Topics


v • e
SMS Menu Bars
Standard Menus:File  •   Edit  •  Display  •   Window  •   Help
Module Menus:2D Mesh   •   Cartesian Grid   •   Curvilinear Grid   •   GIS   •   Map   •   Particle   •   Quadtree   •   Raster   •   Scatter
Model Menus:ADCIRC   •   BOUSS-2D   •   CGWAVE   •   CMS-Flow   •   CMS-Wave   •   FESWMS   •   Generic Model   •   GenCade   •   PTM   •   RMA2   •   RMA4   •   SRH-2D   •   STWAVE   •   TUFLOW
v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=SMS:SRH-2D_Menu&oldid=161274"