GMS:Borehole Commands: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 28: Line 28:
| [[GMS:Horizons_to_3D_Mesh|Horizons -> 3D Mesh...]] || Opens the Horizons to Mesh wizard which can be used to create a [[GMS: 3D_Mesh_Module |3D mesh]] from a combination of boreholes, TINs and conceptual models.
| [[GMS:Horizons_to_3D_Mesh|Horizons -> 3D Mesh...]] || Opens the Horizons to Mesh wizard which can be used to create a [[GMS: 3D_Mesh_Module |3D mesh]] from a combination of boreholes, TINs and conceptual models.
|-
|-
| '''Advanced >''' ||
| colspan="2" |
|-
|-
| TIN Boundary -> Polygon || Creates a new coverage containing a polygon derived from the outer boundary of the TIN.
| '''Advanced ->''' ||
|-
|-
| TIN Thiessen -> Polygons || Creates a new coverage containing polygons derived from the [[GMS:TIN_Display_Options#thiessen polygons|thiessen polygons]] of the TIN.
| HGUs -> Soils ||  
|-
|-
| TIN Contours -> Arcs || Creates a new coverage containing feature arcs derived from the linear contours displayed on the TIN.
| Soils -> HGUs ||  
|-
|-
| Vertex Strings -> Arcs || Creates a new coverage containing a feature arc derived from the vertex string on the TIN (if one exists).
| colspan="2" |
|-
|-
| TIN -> Extruded Solid || Opens the ''Extrude/Offset Tin -> Solid'' dialog which is used to extrude the TIN vertically up or down to form a solid.
| Snap Cross Sections to TIN ||  
|-
|-
| [[GMS:Building_Solids_and_3D_Meshes_with_TINs|Fill Between TINs -> Solid]] || Creates a [[GMS:Solid_Module|solid]] by extruding one or more TINs to a base elevation and then performing a [[GMS:Set_Operations|set operation]] to remove the solid portions outside the TINs.
| Add Contacts to TIN ||  
|-
|-
| colspan="2" |
| Bounding 3D Grid... ||  
|-
|-
| [[GMS:Editing_a_TIN#Adding_Breaklines|Add Breakline(s)]] || Inserts edges into the TIN from a defined breakline, splitting or swapping triangles as necessary.
| Contacts -> TIN ||  
|-
|-
| Select Boundary Triangles || Selects triangles on the outer boundary which meet the "long and thin" criteria specified in [[GMS:Preferences#TINs|TIN settings]].
| Contacts -> 2D Scatter Points... ||  
|-
|-
| Snap Vertices to TIN || Given some selected vertices, moves them so that they are on the surface of a TIN selected from a dialog.
| Watertable -> 2D Scatter Points... ||  
|-
|-
| colspan="2" |
| colspan="2" |
|-
|-
| Intersect TINS || Displays the intersection line between two selected TIN surfaces (if they intersect).
| Sample Data -> 3D Scatter Points... ||  
|-
| Sample Data -> Stratigraphy ||
|-
| colspan="2" |
|-
|-
| [[GMS:Horizons_to_HUF|Horizons -> HUF]] || Opens the Horizons -> HUF wizard to create [[GMS:HUF_Package|MODFLOW HUF]] data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.
| [[GMS:Horizons_to_HUF|Horizons -> HUF]] || Opens the Horizons -> HUF wizard to create [[GMS:HUF_Package|MODFLOW HUF]] data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.

Revision as of 22:35, 24 April 2012

Menu Command Description
New Borehole Creates a new Borehole.
Borehole Editor...
Cross Section Editor...
Lock All Boreholes
Auto Select Contacts/Segments...
Auto-Create Blank Cross Sections...
Auto-Assign Horizons...
Auto-Fill Blank Cross Sections...
Horizons -> Solids... Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs and conceptual models.
Horizons -> 3D Mesh... Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs and conceptual models.
Advanced ->
HGUs -> Soils
Soils -> HGUs
Snap Cross Sections to TIN
Add Contacts to TIN
Bounding 3D Grid...
Contacts -> TIN
Contacts -> 2D Scatter Points...
Watertable -> 2D Scatter Points...
Sample Data -> 3D Scatter Points...
Sample Data -> Stratigraphy
Horizons -> HUF Opens the Horizons -> HUF wizard to create MODFLOW HUF data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:Borehole_Commands&oldid=36987"