SMS:Model Specific Coverages

Specific model coverage can be selected by right-clicking on the map module data and selecting Type | Models.

• 1D Hyd Centerline Coverage
• 1D Hyd Cross Section Coverage – used to identify the cross section stations in the hydraulic model.
• 1D River Conceptual Model
• ADCIRC – used to build a conceptual model of an ADCIRC project.
• ADCIRC Wind Coverage – represents a storm as an arc or series of arcs that follow the storm track and define the storm attributes at the nodes along the arc.
• ADH – used to add vessels to the simulation and give them paths to follow.
• BOUSS2D – used to build feature objects and parameters for a BOUSS-2D model simulation.
• BOUSS Runup/Overtopping – uses multiple coverages to create the model simulation. The coverages are:

• Damping
• Probes
• Roughness
• Transects
• Wavemaker

• CGWAVE – used to build a conceptual model of an CGWAVE project.
• CMS-Flow – utilize two different coverage types.

• Boundary Conditions – used to create the computational domain (or grid).
• Save Points – used to define special output locations from the computation.

• CMS-Wave – used to build a conceptual model of an CMS-Wave project.
• CSHORE – used to build a conceptual model of an CSHORE project.
• EFDC
• ESMF
• FESWMS
• GenCade
• Generic Mesh Coverage
• Generic Cartesian Grid Coverage
• PTM
• SED-ZLJ
• STWAVE
• TABS (RMA2/RMA4)
• TUFLOW Coverages
• WAM

Related Topics

• Map Module
• Generic Coverages