GMS:Borehole Commands

Template:Infobox GMS Menus "Boreholes" menu in the Boreholes Module.

Menu Command	Description
New Borehole	Creates a new Borehole.
Borehole Editor...	Opens the Borehole Editor.
Cross Section Editor...	Brings up the Cross Section Editor dialog where one or multiple 2D cross sections between boreholes are filled.
Lock All Boreholes	Turns off the ability to change the position (drag) of created boreholes.
Auto Select Contacts/Segments...	When one contact or segment is selected, automatically selects matching contacts or segments on other boreholes.
Auto-Create Blank Cross Sections...	Automatically connects boreholes with blank borehole cross sections.
Auto-Assign Horizons...	Automatically assigns horizon IDs to borehole contacts based on material ordering and adjacent boreholes.
Auto-Fill Blank Cross Sections...	Automatically fills all blank cross sections by connecting the contacts on one borehole to those on the other.
Horizons -> Solids...	Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs and conceptual models.
Horizons -> 3D Mesh...	Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs and conceptual models.
Advanced >
HGUs -> Soils	Copies the HGU material IDs to the soil IDs, overwriting the existing soil IDs.
Soils -> HGUs	Copies the soil material IDs to the HGU IDs, overwriting the existing HGU IDs.
Snap Cross Sections to TIN...	Opens a dialog allowing the user to snap the top and/or bottom arcs of the cross sections to TINs.
Add Contacts to TIN	Inserts a new vertex into the active TIN at the location of every selected borehole contact.
Bounding 3D Grid...	Opens the Create Finite Difference Grid dialog with dimensions defaulted such that the new grid will surround all existing boreholes.
Contacts -> TIN	Creates a new TIN with vertices at the locations of the selected contacts.
Contacts -> 2D Scatter Points...	Creates a new 2D scatter point set with vertices at the locations of the selected contacts.
Watertable -> 2D Scatter Points...	Creates a new 2D scatter point set with vertices at the locations of the water table specified on each borehole.
Sample Data -> 3D Scatter Points...	Brings up the Sample Data -> Scatter Points dialog that is used to create a 3D scatter point set from sample data.
Sample Data -> Stratigraphy	Opens the Sample Data -> Stratigraphy dialog allowing the user to define stratigraphy (borehole contacts) based on the sample data.
Horizons -> HUF	Opens the Horizons -> HUF wizard to create MODFLOW HUF data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.