GMS:Converting Borehole Data: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Boreholes links}} | {{Boreholes links}} | ||
Borehole data can be converted to other types of objects with in GMS such as 2D Scatter Points, TINs, 3D Meshes. Borehole data is converted by using the following commands in the [[GMS:Borehole Commands|Boreholes menu]]: | Borehole data can be converted to other types of objects with in GMS such as 2D Scatter Points, TINs, 3D Meshes. Borehole data is converted by using the following commands in the [[GMS:Borehole Commands|''Boreholes'' menu]]: | ||
*[[GMS:Horizons to Solids|Horizons to Solids]] | *[[GMS:Horizons to Solids|Horizons to Solids]] | ||
| Line 6: | Line 6: | ||
*[[GMS:Horizons to 3D Mesh|Horizons to 3D Mesh]] | *[[GMS:Horizons to 3D Mesh|Horizons to 3D Mesh]] | ||
*Contacts to TIN | *Contacts to TIN | ||
:The | :The '''Contacts → TIN''' command is used to create a [[GMS:TIN Module|TIN]] surface from a set of selected contacts. | ||
*Contacts to 2D Scatter Points | *Contacts to 2D Scatter Points | ||
:A set of selected contacts can be converted to a 2D scatter point set using the | :A set of selected contacts can be converted to a 2D scatter point set using the '''Contacts → 2D Scatter Points''' command. | ||
*Sample Data to 3D Scatter Points | *Sample Data to 3D Scatter Points | ||
:The | :The '''Sample Data → 3D Scatter Points''' command brings up the ''Sample Data → Scatter Points'' dialog that is used to create a 3D scatter point set from sample data. | ||
*Sample Data to Stratigraphy | *Sample Data to Stratigraphy | ||
*Watertable to 2D Scatter Points | *Watertable to 2D Scatter Points | ||
:The water table coordinates for a set of boreholes can be converted to a 2D scatter point set using the | :The water table coordinates for a set of boreholes can be converted to a 2D scatter point set using the '''Water Table → 2D Scatter Points''' command. | ||
*Add Contacts to TIN | *Add Contacts to TIN | ||
:The | :The '''Add Contacts to TIN''' command is used to enter a point from a contact into the active TIN. The contact(s) are first selected and the command is then chosen from the ''Borehole'' menu. Typically all contacts which should be part of a TIN are selected before generating the TIN, but sometimes one is inadvertently left out, or more boreholes are added later. | ||
{{Navbox GMS}} | {{Navbox GMS}} | ||
[[Category:Boreholes]] | [[Category:Boreholes]] | ||
