GMS:2D Scatter Point Commands

From XMS Wiki
Revision as of 18:39, 12 April 2022 by Klemon (talk | contribs)
Jump to navigationJump to search
GMS Commands
Common
File
Edit
Display
Modules
TINs
Boreholes
Solids
Mesh (2D)
Grid (2D)
Scatter Points (2D)
Interpolation (2D and 3D)
Mesh (3D)
Grid (3D)
Scatter Points (3D)
Feature Objects
GIS
UGrid
Models
FEMWATER
MODAEM
MODFLOW
mod-PATH3DU
MODPATH
MT3DMS
SEAWAT
SEEP2D
T-PROGS
UTEXAS

The Scatter Point menu becomes available when the 2D Scatter Point module is active. The menu has one submenu: the Interpolation submenu. Below are the commands available in this menu.

New Scatter Point Set
Creates a new dataset.
Lock All Scatter Points
Prevents adjusting the location of scatter points.
Scatter Point Settings...
Opens the Scatter sets tab under the Preferences dialog.
Find Point...
Locates a point based on ID number or text label.
Interpolation >
Interpolation Options...
Sets the interpolation options used when interpolating to other objects. The interpolation options are saved with the project.
Interpolate → Active TIN
Interpolate the active dataset on the active scatter set to the active TIN.
Interpolate → 2D Mesh
Interpolate the active dataset on the active scatter set to the 2D mesh.
Interpolate → 2D Grid
Interpolate the active dataset on the active scatter set to the 2D grid.
Interpolate → 3D Mesh
Interpolate the active dataset on the active scatter set to the 3D mesh.
Interpolate → 3D Grid
Interpolate the active dataset on the active scatter set to the 3D grid.
Interpolate → MODFLOW Layers
Interpolate the active dataset on the active scatter set to the MODFLOW Layers.
Interpolate → UGrid
Interpolate the active dataset on the active scatter set to the active UGrid.
Gaussian Simulation Options...
Gaussian Sequential Simulation (GSS) is a form of kriging that can only be used for 2D interpolation and only works when interpolating to 3D cell-centered grids.
Run Gaussian Simulation
Launches the Gaussian simulation run.
Jackknifing...
Interpolates the active scatter point set to itself using the currently selected interpolation scheme.
Summary
Brings up Summary Dialog.


Scatter Point Set Project Explorer Right-Click Menu

In addition to the standard right-click menu commands, the following commands are available:

Z Values → Dataset
Creates a dataset from the Z locations of the points.
Map to Z Values
Moves the Z locations of the points to the values in the dataset.
Zoom To Extents
Frames the Graphics Window around the selected objects.

Related Topics