GMS:Borehole Commands
From XMS Wiki
Jump to navigationJump to search
| Menu Command | Description |
|---|---|
| New Borehole | Creates a new Borehole. |
| Borehole Editor... | |
| Cross Section Editor... | |
| Lock All Boreholes | |
| Auto Select Contacts/Segments... | |
| Auto-Create Blank Cross Sections... | |
| Auto-Assign Horizons... | |
| Auto-Fill Blank Cross Sections... | |
| Horizons -> Solids... | Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs and conceptual models. |
| Horizons -> 3D Mesh... | Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs and conceptual models. |
| Advanced -> | |
| HGUs -> Soils | |
| Soils -> HGUs | |
| Snap Cross Sections to TIN | |
| Add Contacts to TIN | |
| Bounding 3D Grid... | |
| Contacts -> TIN | |
| Contacts -> 2D Scatter Points... | |
| Watertable -> 2D Scatter Points... | |
| Sample Data -> 3D Scatter Points... | |
| Sample Data -> Stratigraphy | |
| Horizons -> HUF | Opens the Horizons -> HUF wizard to create MODFLOW HUF data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package. |
GMS – Groundwater Modeling System | ||
|---|---|---|
| Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids |  |
| Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
| Aquaveo | ||
