GMS:Borehole Commands
From XMS Wiki
Jump to navigationJump to search
Menu Command | Description | |
---|---|---|
New Borehole | Creates a new Borehole. | |
Borehole Editor... | ||
Cross Section Editor... | ||
Lock All Boreholes | ||
Auto Select Contacts/Segments... | ||
Auto-Create Blank Cross Sections... | ||
Auto-Assign Horizons... | ||
Auto-Fill Blank Cross Sections... | ||
Horizons -> Solids... | Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs and conceptual models. | |
Horizons -> 3D Mesh... | Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs and conceptual models. | |
Advanced > | ||
HGUs -> Soils | ||
Soils -> HGUs | ||
Snap Cross Sections to TIN | ||
Add Contacts to TIN | ||
Bounding 3D Grid... | ||
Contacts -> TIN | ||
Contacts -> 2D Scatter Points... | ||
Watertable -> 2D Scatter Points... | ||
Sample Data -> 3D Scatter Points... | ||
Sample Data -> Stratigraphy | ||
Horizons -> HUF | Opens the Horizons -> HUF wizard to create MODFLOW HUF data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package. |
GMS – Groundwater Modeling System | ||
---|---|---|
Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids | |
Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
Aquaveo |