SMS:TUFLOW Interface
From XMS Wiki
Jump to navigationJump to search
The TUFLOW interface in SMS exists in several modules including: Cartesian Grid Module, Map Module, Scatter Module, and Mesh Module. Many of the TUFLOW building blocks are managed using the Project Explorer.
Tutorials
The SMS tutorials are a good place to start learning to use SMS and associated models. The following tutorials will help get you started using TUFLOW.
- Models | TUFLOW 2D
- Models | TUFLOW 1D
- General | Data Visualization
- General | Observation
General Steps to Build a TUFLOW Model
- Define the domain or domains
- Setup boundary conditions
- Create the simulation
- Define Material Properties
- Set Model Parameters
- Run TUFLOW
- Find problems and verify model setup using check files
- View and analyze the results
- Repeat above steps to generate new simulations
Optional Steps
- Define flow constrictions
- Define geometry modifications such as levees
TUFLOW Coverages
Much of the data used in TUFLOW is specified on a coverage level into one of the TUFLOW Coverages.
SMS – Surface-water Modeling System | ||
|---|---|---|
| Modules: | 1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid |  |
| General Models: | 3D Structure • FVCOM • Generic • PTM | |
| Coastal Models: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM | |
| Riverine/Estuarine Models: | AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV | |
| Aquaveo • SMS Tutorials • SMS Workflows | ||
