AHGW:BoreholeLog Table to Points

BoreholeLog Table to Points tool in the Geoprocessing pane

The BoreholeLog Table to Points tool is accessed by double-clicking on " BoreholeLog Table to Points" under the " Features" toolset under the " Subsurface Analyst" toolset under the " ArcHydroGroundwater.pyt" toolbox. This tool creates new points from the BoreholeLog table. The points can be used for further analysis, such as generating a set of points for a particular HorizonID value.

ArcGIS Notes – In older versions of ArcGIS, this tool appears as a dialog and is accessed through the "Arc Hydro Groundwater Tools" toolbox.

The icons vary between ArcGIS and ArcGIS Pro.

The names of the fields/options for this tool might be different in ArcGIS.

The following fields are available. Required fields are marked with a icon. In ArcGIS, they are marked with a icon. Fields marked with a icon may not be supported or the table selected in that field may not exist.

• Input Well Features – Click the button to bring up the Input Well Features dialog in order to specify the input Well features, which will be related to the BoreholeLog table to create new points.
• Well Unique Feature Identifier Field – Select from the drop-down the field that uniquely identifies the Well features, such as a HydroID.
• Input Borehole Data Table – Click the button to bring up the Input Borehole Data Table dialog in order to specify the BoreholeLog table, containing information about all borehole data.
• Borehole Related Identifier Field – Select from the drop-down the field in the BoreholeLog table that relates the data with the associated Well features.
• Output Feature Class – Click the button to bring up the Output Feature Class dialog in order to specify the output feature class to create.
• Copy Fields – Optional. Using the drop-down menu, select specific fields found in the BoreholeLog table to copy over to the output feature class. Each time an item is selected in the drop-down menu, a new drop-down menu appears to allow for selecting an additional field if desired. Alternatively, use the Add Many button to open a list of all the fields. Using this list, select multiple options at the same time by checking the checkboxes. If selecting all the fields is desired, select the Toggle All Checkboxes option. Make sure to click Add to add the selected fields to the tool.

• ArcGIS Feature Note – For Copy Fields in ArcGIS, use the Add Field button to add specific fields found in the BoreholeLog table to copy over to the output feature class.

• BoreholeLog Filtering Field – Optional. Select from the drop-down the field used to filter the BoreholeLog table by. If used, you should also specify a filter value.
• Filter Value – Optional. In ArcGIS Pro, this option does not appear until an option is selected for the BoreholeLog Filtering Field. Select from the drop-down the value in the filtering field which is used to filter the BoreholeLog table. If used, you should also specify a filtering field.
• Horizon ID Value to Assign
• Create 3D Features – Optional. Turn on to create Z-enabled output features. Turn off to create output features that are not Z enabled.
• Elevation Field for 3D Features – Optional. Select from the drop-down the field in the BoreholeLog table which includes the elevation data for creating Z-enabled features. If you specify that the output feature class should be Z enabled, you need to choose the field which holds the elevation values.