AHGW:Transform XS2D Well Detail Polygon: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Tag: Reverted
No edit summary
Tag: Reverted
Line 20: Line 20:
*''Well Ground Elevation (if not Z enabled)'' – Select from the drop-down the field in the Well features that represents the elevation of the well points, from which the depth is referenced. If the Well features are not Z-Enabled, you will need to specify this field. If the Well features are Z-Enabled, you can optionally leave this field blank, and the Z coordinate will be used as the elevation of the wells.
*''Well Ground Elevation (if not Z enabled)'' – Select from the drop-down the field in the Well features that represents the elevation of the well points, from which the depth is referenced. If the Well features are not Z-Enabled, you will need to specify this field. If the Well features are Z-Enabled, you can optionally leave this field blank, and the Z coordinate will be used as the elevation of the wells.
*''Data Type Field for filtering'' – Optional. Select from the drop-down the filter data type value from the well construction table. This might be used if your well construction table is organized such that all the well construction values are stored in the same field, with a separate field representing the type of data being stored (such as grout, screen, etc.). This way, you can filter out all of the data and only look at one particular data type. If your well construction data is stored in a separate field for each data type, or your well construction table only contains one type of data, do not use this parameter.
*''Data Type Field for filtering'' – Optional. Select from the drop-down the filter data type value from the well construction table. This might be used if your well construction table is organized such that all the well construction values are stored in the same field, with a separate field representing the type of data being stored (such as grout, screen, etc.). This way, you can filter out all of the data and only look at one particular data type. If your well construction data is stored in a separate field for each data type, or your well construction table only contains one type of data, do not use this parameter.
*''Data Type value for filtering'' – Optional. Used only in conjunction with the "Data Type Field for filtering" option. This parameter specifies the well construction type to filter on, when more than one data type is stored in the data value field.
*''Data Type value for filtering'' – Optional. Used only in conjunction with the "Data Type Field for filtering" option. When more than one data type is stored in the data value field, this parameter specifies the well construction type to filter on.  




{{Navbox AHGW}}
{{Navbox AHGW}}
[[Category:AHGW Subsurface Analyst]]
[[Category:AHGW Subsurface Analyst]]

Revision as of 18:16, 23 August 2022

Transform XS2D Well Detail Polygon tool in the Geoprocessing pane

The Transform XS2D Well Detail Polygon tool is accessed by double-clicking on "ArcGISPro Toolbx Tool.png Transform XS2D Well Detail Polygon" under the "ArcGISPro Toolset.png XS2D Editor" toolset under the "ArcGISPro Toolset.png Subsurface Analyst" toolset under the "ArcGISPro Toolbx Item.png ArcHydroGroundwater.pyt" toolbox. This tool adds well construction diagrams to an XS2D data frame, in polygon format.

ArcGIS Notes – In older versions of ArcGIS, this tool is accessed through the "Arc Hydro Groundwater Tools" toolbox. The tool appears as a dialog, not a pane.
The icons vary between ArcGIS and ArcGIS Pro.
The names of the fields in this tool might be different in ArcGIS. They should still be recognizable.
The order of the fields in this tool might be different in ArcGIS.

The following fields are available. Required fields are marked with a ArcGIS Pro Red Required Symbol.png icon. In ArcGIS, they are marked with a ArcGIS required - green circle icon.png icon. Fields marked with a ArcGIS Pro Warning Red.png icon may not be supported or the table may not exist.

  • ArcGIS Pro Red Required Symbol.png Input XS2D_Catalog Table – Click the ArcGISPro Open.png button to bring up the Input XS2D_Catalog Table dialog in order to specify the XS2D_Catalog table as defined by the Arc Hydro Groundwater Data Model. This table stores information about the feature classes associated with a SectionLine, where well construction features will be created.
  • ArcGIS Pro Red Required Symbol.png Input Well Features – Click the ArcGISPro Open.png button to bring up the Input Well Features dialog in order to specify the well point features associated with the well construction details.
  • ArcGIS Pro Red Required Symbol.png Input SectionLine Features – Click the ArcGISPro Open.png button to bring up the Input SectionLine Features dialog in order to specify the input line features representing section lines.
  • ArcGIS Pro Red Required Symbol.png SectionLine ID – Enter the HydroID of the SectionLine feature to process.
  • ArcGIS Pro Red Required Symbol.png XS2DType – Select from the drop-down the type of feature class to store the well construction features in, based on the XS2DType field in the XS2D_Catalog table.
  • ArcGIS Pro Red Required Symbol.png FType – Enter the feature type value to store on the newly created well construction features.
  • ArcGIS Pro Red Required Symbol.png Input Well Construction Table – Click the ArcGISPro Open.png button to bring up the Input Well Construction Table dialog in order to specify the table containing the well construction information.
  • ArcGIS Pro Red Required Symbol.png Well Construction WellID Field – Select from the drop-down the field in the well construction table that associates with the HydroID of the Well features.
  • ArcGIS Pro Red Required Symbol.png Well Construction From Depth Field – Select from the drop-down the starting depth beneath the well where the well construction feature is created.
  • ArcGIS Pro Red Required Symbol.png Well Construction To Depth Field – Select from the drop-down the ending depth beneath the well where the well construction feature is created.
  • ArcGIS Pro Red Required Symbol.png Display Width – Enter the width of the polygons to create in the units of the polygon feature class, centered at the well locations.
  • Well Ground Elevation (if not Z enabled) – Select from the drop-down the field in the Well features that represents the elevation of the well points, from which the depth is referenced. If the Well features are not Z-Enabled, you will need to specify this field. If the Well features are Z-Enabled, you can optionally leave this field blank, and the Z coordinate will be used as the elevation of the wells.
  • Data Type Field for filtering – Optional. Select from the drop-down the filter data type value from the well construction table. This might be used if your well construction table is organized such that all the well construction values are stored in the same field, with a separate field representing the type of data being stored (such as grout, screen, etc.). This way, you can filter out all of the data and only look at one particular data type. If your well construction data is stored in a separate field for each data type, or your well construction table only contains one type of data, do not use this parameter.
  • Data Type value for filtering – Optional. Used only in conjunction with the "Data Type Field for filtering" option. When more than one data type is stored in the data value field, this parameter specifies the well construction type to filter on.