GMS:Redistribute Layers

From XMS Wiki
Revision as of 16:22, 24 June 2016 by Jcreer (talk | contribs)
Jump to navigationJump to search
3D Grid Module
Samp mt3d.gif
3D Grid
Creating and Editing
Viewing Modes
Converting to Other Data Types
Exporting Grids
More
Display Options
Tool Palette
Cell Properties
MODFLOW Display Options
MODPATH Display Options
MT3DMS Display Options
3D Grid Commands

One way to alter 3D grid layer thicknesses is via the Redistribute Layers dialog accessed via the Grid | Redistribute Layers menu command. This dialog has two sections: one section to specify grid top and bottom elevation and another section to specify layer thickness.

The dialog can specify grid elevation with the following options:

  • Specify top elevation – Designates a constant top elevation for the grid.
  • Specify bottom elevation – Designates a constant bottom elevation for the grid.

The layer thickness table lists all available layers and allows editing the relative thicknesses of each grid layer. It has the following options.

  • Edit – Option must be checked to change the thickness of the layer. GMS requires that at least one layer not be selected as the thickness for this layer will automatically be calculated.
  • Fraction – Changes the thickness of the layer by the percentage value entered. The value needs to be a positive value between 0.01 and 0.99. GMS will automatically adjusts the fraction value of other layers so the total equals 1 (100%).
The Redistribute Layers dialog

Other ways to alter grid layer thicknesses: