To scatter data can be used in SMS with the following steps:
| 1. SMS project setup.
|
| 1. Start SMS, or clear existing projects in SMS.
|
- If SMS is already running, select File | Delete All.
- A new project can also be started by using CTRL + N.
|
|
| 2. Gather data files.
|
- Make certain all data files for the project have been collected.
- Certain file types need to be in the same folder with other files. Be certain the data files are not located in different folders.
- Before importing, check that the data is in a file type that SMS can recognize.
|
| 3. Open files.
|
- Use the File | Open command to launch the Open dialog.
- Locate the files to be opened. Multiple files may be opened at once using the Ctrl key.
- For GIS data, switch to the GIS module and use the Data | Add GIS Data command.
|
| 4. Review data.
|
- Check data to see that it shows up in the Project Explorer and any feature objects are in the Graphics Window.
- Check data projection.
- Check data attributes.
- When done checking the data, continue with the project.
|
