SMS:2D Mesh Module Menus: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(7 intermediate revisions by 3 users not shown)
Line 14: Line 14:


Right-clicking on a Mesh item [[File:2D Mesh Icon.svg|16 px]] in the Project Explorer will bring up the following menu options:
Right-clicking on a Mesh item [[File:2D Mesh Icon.svg|16 px]] in the Project Explorer will bring up the following menu options:
* '''New Folder''' – Creates a new folder under the ''Mesh'' item
* '''New Folder''' – Creates a new folder under the mesh item
* '''Delete''' – Deletes the active mesh.
* '''Rename''' – Allows changing the active mesh name. Names need to be unique, hence if a non-unique name is entered, a warning message will appear and the name will be reverted. Apostrophes and special characters should not be used.
* '''Duplicate''' – this command will create a duplicate of the active mesh, along with its model data.  The name of the new mesh will be the same as the original mesh, but with an appended number.
* '''Duplicate''' – this command will create a duplicate of the active mesh, along with its model data.  The name of the new mesh will be the same as the original mesh, but with an appended number.
* '''Rename''' – Allows changing the active mesh name. Names need to be unique, hence if a non-unique name is entered, a warning message will appear and the name will be reverted.
* '''Remove''' – Deletes the active mesh.
* '''Merge 2D Meshes''' – merges two meshes together. See the article [[SMS:Merge 2D Meshes|Merge 2D Meshes]].
* '''Interpolate to''' – Bring ups the Interpolation Options dialog. This dialog is used to interpolate scatter set values to a 2D mesh, Cartesian grid, Ugrid, or quadtree.
* '''Convert''' – Converts mesh to Map, UGrid, or 2D Scatter.  
<!--* '''Merge 2D Meshes''' &ndash; merges two meshes together. See the article [[SMS:Merge 2D Meshes|Merge 2D Meshes]].-->
* '''Convert''' &ndash; Converts mesh to map, UGrid, or 2D scatter.
* '''Export''' &ndash; Exports your project from SMS.
* '''Export Datasets''' &ndash; Exports your data from SMS into notes or other apps.
* '''Snap Mesh to Arc''' &ndash; Snaps the Mesh to the arcs created.   
<!--* '''Create Quality Mesh Scatter Set''' &ndash; This command creates a scatter set consisting of one vertex at the center of each element in the mesh. Six datasets are created for this scatter set including the six quality measures defined in the [[SMS:ARR Mesh Quality Assessment Plot|ARR quality plot]]. These datasets range from 0.0 to 1.0. The higher the value, the higher the quality of the element. (These quantities can be displayed directly on the mesh in element centered datasets. However, SMS does not currently support this option.) The creation of this scatter set gives a spatial feeling for the quality of the mesh.
* '''Edit Subset''' &ndash; This command is only available when elements are selected.  In this case, the command appears.  Selecting the command creates a subset from the selected elements and enters [[SMS:Editing 2D Meshes#Subset Edit Mode|subset editing mode]].-->
* '''Projection''' &ndash; Allows setting the projection of the mesh.
* '''Projection''' &ndash; Allows setting the projection of the mesh.
* '''Reproject''' &ndash; Allows reprojecting the projection of the mesh.
* '''Reproject''' &ndash; Allows reprojecting the projection of the mesh.
* '''Metadata''' &ndash; Allows making annotations.
* '''Zoom to Mesh''' &ndash; Zooms to where the mesh is located within the Graphic Window.
* '''Create Quality Mesh Scatter Set''' &ndash; This command creates a scatter set consisting of one vertex at the center of each element in the mesh. Six datasets are created for this scatter set including the six quality measures defined in the [[SMS:ARR Mesh Quality Assessment Plot|ARR quality plot]]. These datasets range from 0.0 to 1.0. The higher the value, the higher the quality of the element. (If SMS supported element centered datasets, these quantities could be displayed directly on the mesh.) The creation of this scatter set gives a spatial feeling for the quality of the mesh.  
* '''Metadata''' &ndash; Allows making annotations.
* '''Zoom to Mesh''' &ndash; Zooms to where the mesh is located within the ''Graphic Window''.
* '''Properties''' &ndash; Opens a ''Mesh Properties'' dialog that shows information about the mesh.
* '''Edit Subset''' &ndash; This command is only available when elements are selected.  In this case, the command appears.  Selecting the command creates a subset from the selected elements and enters [[SMS:Editing 2D Meshes#Subset Edit Mode|subset editing mode]].


==Model Specific Menus==
==Model Specific Menus==
Line 34: Line 39:
* [[SMS:Generic Model#Generic Model Menu|Generic Mesh Model]]
* [[SMS:Generic Model#Generic Model Menu|Generic Mesh Model]]
* TABS
* TABS
<blockquote style="margin-top:0px; margin-bottom:0px;">
** [[SMS:RMA2 Menu|RMA2]]
* [[SMS:RMA2 Menu|RMA2]]
** [[SMS:RMA4_Graphical_Interface#RMA4_Menu|RMA4]]
* [[SMS:RMA4_Graphical_Interface#RMA4_Menu|RMA4]]
</blockquote>




Latest revision as of 20:16, 15 April 2022

The following menus are available in the 2D Mesh Module:

Standard Menus

Includes the File, Edit, Display, and other standard menus. See SMS Menus for more information.

Module Specific Menus

Right-Click Menu

Right-clicking on the Mesh Data folder 2D Mesh Folder.svg in the Project Explorer has the option to bring up the Display Options dialog.

Right-clicking on a Mesh item 2D Mesh Icon.svg in the Project Explorer will bring up the following menu options:

  • New Folder – Creates a new folder under the mesh item
  • Rename – Allows changing the active mesh name. Names need to be unique, hence if a non-unique name is entered, a warning message will appear and the name will be reverted. Apostrophes and special characters should not be used.
  • Duplicate – this command will create a duplicate of the active mesh, along with its model data. The name of the new mesh will be the same as the original mesh, but with an appended number.
  • Remove – Deletes the active mesh.
  • Interpolate to – Bring ups the Interpolation Options dialog. This dialog is used to interpolate scatter set values to a 2D mesh, Cartesian grid, Ugrid, or quadtree.
  • Convert – Converts mesh to map, UGrid, or 2D scatter.
  • Export – Exports your project from SMS.
  • Export Datasets – Exports your data from SMS into notes or other apps.
  • Snap Mesh to Arc – Snaps the Mesh to the arcs created.
  • Projection – Allows setting the projection of the mesh.
  • Reproject – Allows reprojecting the projection of the mesh.
  • Zoom to Mesh – Zooms to where the mesh is located within the Graphic Window.
  • Metadata – Allows making annotations.
  • Properties – Opens a Mesh Properties dialog that shows information about the mesh.

Model Specific Menus


v • e
SMS Menu Bars
Standard Menus:File  •   Edit  •  Display  •   Window  •   Help
Module Menus:2D Mesh   •   Cartesian Grid   •   Curvilinear Grid   •   GIS   •   Map   •   Particle   •   Quadtree   •   Raster   •   Scatter
Model Menus:ADCIRC   •   BOUSS-2D   •   CGWAVE   •   CMS-Flow   •   CMS-Wave   •   FESWMS   •   Generic Model   •   GenCade   •   PTM   •   RMA2   •   RMA4   •   SRH-2D   •   STWAVE   •   TUFLOW
v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=SMS:2D_Mesh_Module_Menus&oldid=154215"