GMS:Interpolation Menu: Difference between revisions

Revision as of 20:59, 19 March 2013

"Interpolation" menu in the 2D and 3D Scatter Point Modules.

Menu Command	Description
Interpolation Options...	Opens the appropriate Interpolation Options dialog.
Interpolate → Active TIN	Interpolates to the vertices of the active TIN.
Interpolate → 2D Mesh	Interpolates to the nodes of the 2D finite element mesh.
Interpolate → 2D Grid	Interpolates to the 2D finite difference grid. The interpolation is done either to the grid nodes or to the grid cell centers depending on whether the grid is a mesh-centered or cell-centered grid. (See 2D Grid Types)
Interpolate → 3D Mesh	Interpolates to the nodes of the 3D finite element mesh.
Interpolate → 3D Grid	Interpolates to the 3D finite difference grid. The interpolation is done either to the grid nodes or to the grid cell centers depending on whether the grid is a mesh-centered or cell-centered grid. (See 2D Grid Types)
Interpolate → MODFLOW Layers	Interpolate from 2D scatter data to MODFLOW data: top and bottom layer elevations, LPF array data (HK, VK, etc), recharge.
Gaussian Simulation Options...	A form of Kriging that can only be used for 2D interpolation and only works when interpolating to 3D cell-centered grids.
Run Gaussian Simulation
Jackknifing...
Summary...	Opens the Jackknifing Summary dialog

@@ Line 1: / Line 1: @@
-{{Infobox GMS Menus}}
+{{Infobox GMS Commands}}
 "Interpolation" menu in the [[GMS:2D Scatter Point Module|2D]] and [[GMS:3D Scatter Point Module|3D Scatter Point Modules]].
 {| class="wikitable"

v • e GMS – Groundwater Modeling System
Modules:	2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids
Models:	FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET
Aquaveo