GMS:Feature Object Commands

The Feature Objects menu becomes available when the Conceptual model, or Map model, is active. The menu has the following commands:

• Build Polygons

  Creates polygons out of closed arcs.

• Vertices↔Nodes

  Switches selected vertices to nodes and vise verse.

• Vertices → Nodes

  Switches selected vertices to nodes.

• Nodes → Vertices

  Switches selected nodes to vertices.

• Redistribute Vertices...

  Redistributes the amount of vertices on a selected arc using a user input value for spacing.

• Create Arc Group

  Creates the select multiple arcs as one. All arcs are still separate arcs, but one group.

• Reverse Arc Direction

  Arcs have a direction that follows the path that they were made. Direction is important with some parameters and need to be consistent throughout the model.

• Clean...

  Selecting the Clean command brings up the Clean dialog. See Clean Command for more information.

• Find Feature Object... ||
• New Grid Frame

  Creates a new grid frame object in the project explorer.

• Activate Cells in Coverage(s)

  After creating a coverage that defines the model boundary and creating a grid, just the cells that are in the active coverage with remain active.

• Arc(s) → Cross Section

  Opens the Arcs → Cross Sections dialog. See Arc → Cross Sections for more information.

• Map → TIN

  This command creates a TIN using each polygon in the coverage.

• Map → 2D Mesh

  This command creates a 2D Mesh on the interior of all of the polygons in the current coverage. See Map to 2D Mesh for more information.

• Map → 2D Grid

  Opens the Create Grid dialog. See Map to 2D Grid for more information.

• Map → 3D Grid

  Opens the Create Grid dialog. See Map to 3D Grid for more information.

• Map → 2D Scatter Points

  Creates a scatter point set from the points and nodes and vertices of the current coverage. See Map to 2D Scatter Points for more information.

• Map → 3D Scatter Points

  Creates a scatter point set from the points and nodes and vertices of the current coverage. See Map to 3D Scatter Points for more information.

• Map → MODFLOW

  Opens the Map → MODFLOW Options dialog. See Map to MODFLOW for more information.

• Map → SEAM3D ||
• Map → FEMWATER

  This command assigns the wells, boundary conditions, and recharge zones assigned to the points, arcs, and polygons. See Map to FEMWATER for more information.

• Map → SEEP2D ||
• Map → WASH123D ||
• Map → ADH ||
• Copy to Coverage...

Opens a dialog allowing for selection of one or more coverages which selected feature objects will be copied to. This may result in overlapping and/or intersecting objects.

Related Topics

• Map Module
• Conceptual Model