SMS:TUFLOW Menu

The following menu commands are available in the TUFLOW Menu:

Note: As of SMS 11.1, the TUFLOW menu has been removed from the menu bar.

• Cell Attributes

File:TUFLOW Cell Attributes.jpg

TUFLOW Cell Attributes dialog

This command is enabled when one or more cells on a TUFLOW grid are selected. The attributes that can be set using this command are the cell code and the option to override the global initial water level (set in the 2D Model Control). The cell code (water cell, inactive cell – in mesh, inactive cell – not in mesh) for the selected cells will only be used if Specify cell by cell is selected in Cell codes section of the TUFLOW Grid Options dialog.

• Assign Material Type

This command is enabled when one or more cells on a TUFLOW grid are selected. The command will open the Materials Data dialog. The Materials Data dialog will allow the user to select a material to assign to a cell. The material set for the cell will only be used if Specify cell by cell is selected in the Materials section of the TUFLOW Grid Options dialog.

The TUFLOW Simulation menu is accessed by right-clicking on the TUFLOW simulation item in the project explorer. The following menu commands are available in the TUFLOW Simulation menu:

• Delete

This command will delete the TUFLOW simulation.

• Duplicate

This command will create another copy of the simulation.

• Rename

This command will allow a user to rename the simulation.

• Export TUFLOW files

SMS will save the TUFLOW input files in the TUFLOW directory for that simulation. If one does not already exist, the user will be prompted to select a location.

• Launch TUFLOW

SMS will launch TUFLOW using input files that have previously been exported.

• Save Project, Export and Launch TUFLOW

SMS will save the project, write out the TUFLOW input files, and launch TUFLOW.

• 2D Model Control

This command will bring up the 2D Model Control dialog where various model parameters are set. See TUFLOW 2D Model Control page.

• 1D Control

This command will bring up the Control 1D dialog where various model parameters are set. See Model Parameters page.

• Model Check

This command will cause SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the Model Check dialog with information on how to correct them.

Related Topics

• TUFLOW