SMS:TUFLOW Menu: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The ''TUFLOW Simulation'' menu is accessed by right-clicking on the TUFLOW simulation item in the project explorer. The following menu commands are available in the ''TUFLOW Simulation'' menu: | The ''TUFLOW Simulation'' menu is accessed by right-clicking on the TUFLOW simulation item in the project explorer. The following menu commands are available in the ''TUFLOW Simulation'' menu: | ||
| Line 29: | Line 19: | ||
* '''Model Check''' | * '''Model Check''' | ||
<blockquote> Causes SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the [[SMS:Model Checker|''Model Check'']] dialog with information on how to correct them. </blockquote> | <blockquote> Causes SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the [[SMS:Model Checker|''Model Check'']] dialog with information on how to correct them. </blockquote> | ||
==Earlier TUFLOW Menu=== | |||
The following menu commands are available in the [[SMS:TUFLOW|TUFLOW]] Menu: | |||
:'''''Note: As of SMS 11.1, the TUFLOW menu has been removed from the menu bar.''''' | |||
* '''Cell Attributes''' | |||
[[Image:TUFLOW Cell Attributes.jpg|thumb|275 px|TUFLOW ''Cell Attributes'' dialog]] | |||
<blockquote>This command is enabled when one or more cells on a TUFLOW grid are selected. The attributes that can be set using this command are the cell code and the option to override the global initial water level (set in the 2D Model Control). The cell code (water cell, inactive cell – in mesh, inactive cell – not in mesh) for the selected cells will only be used if ''Specify cell by cell'' is selected in ''Cell codes'' section of the [[SMS:TUFLOW Grid Options|''TUFLOW Grid Options'']] dialog. </blockquote> | |||
*'''Assign Material Type''' | |||
<blockquote>This command is enabled when one or more cells on a TUFLOW grid are selected. The command will open the [[SMS:Materials Data|''Materials Data'']] dialog. The ''Materials Data'' dialog will allow selecting a material to assign to a cell. The material set for the cell will only be used if ''Specify cell by cell'' is selected in the ''Materials'' section of the [[SMS:TUFLOW Grid Options|''TUFLOW Grid Options'']] dialog.</blockquote> | |||
==Related Topics== | ==Related Topics== | ||
Revision as of 15:33, 29 February 2016
The TUFLOW Simulation menu is accessed by right-clicking on the TUFLOW simulation item in the project explorer. The following menu commands are available in the TUFLOW Simulation menu:
- Delete
Removes the TUFLOW simulation.
- Duplicate
Creates another copy of the simulation.
- Rename
Changes the name of the simulation.
- Export TUFLOW files
SMS will save the TUFLOW input files in the TUFLOW directory for that simulation. If one does not already exist, the user will be prompted to select a location.
- Launch TUFLOW
Launches TUFLOW using input files that have previously been exported.
- Save Project, Export and Launch TUFLOW
Saves the project, writes out the TUFLOW input files, and launches TUFLOW.
- 2D Model Control
Brings up the 2D Model Control dialog where various model parameters are set. See TUFLOW 2D Model Control page.
- 1D Control
Brings up the Control 1D dialog where various model parameters are set. See Model Parameters page.
- Model Check
Causes SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the Model Check dialog with information on how to correct them.
Earlier TUFLOW Menu=
The following menu commands are available in the TUFLOW Menu:
- Note: As of SMS 11.1, the TUFLOW menu has been removed from the menu bar.
- Cell Attributes
This command is enabled when one or more cells on a TUFLOW grid are selected. The attributes that can be set using this command are the cell code and the option to override the global initial water level (set in the 2D Model Control). The cell code (water cell, inactive cell – in mesh, inactive cell – not in mesh) for the selected cells will only be used if Specify cell by cell is selected in Cell codes section of the TUFLOW Grid Options dialog.
- Assign Material Type
This command is enabled when one or more cells on a TUFLOW grid are selected. The command will open the Materials Data dialog. The Materials Data dialog will allow selecting a material to assign to a cell. The material set for the cell will only be used if Specify cell by cell is selected in the Materials section of the TUFLOW Grid Options dialog.
Related Topics
SMS Menu Bars | |
|---|---|
| Standard Menus: | File • Edit • Display • Window • Help |
| Module Menus: | 2D Mesh • Cartesian Grid • Curvilinear Grid • GIS • Map • Particle • Quadtree • Raster • Scatter |
| Model Menus: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • FESWMS • Generic Model • GenCade • PTM • RMA2 • RMA4 • SRH-2D • STWAVE • TUFLOW |
SMS – Surface-water Modeling System | ||
|---|---|---|
| Modules: | 1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid |  |
| General Models: | 3D Structure • FVCOM • Generic • PTM | |
| Coastal Models: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM | |
| Riverine/Estuarine Models: | AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV | |
| Aquaveo • SMS Tutorials • SMS Workflows | ||
