SMS:TUFLOW Menu

The TUFLOW Simulation menu is accessed by right-clicking on the TUFLOW simulation item in the project explorer. The following menu commands are available in the TUFLOW Simulation menu:

• Delete

Removes the TUFLOW simulation.

• Duplicate

Creates another copy of the simulation.

• Rename

Changes the name of the simulation.

• Export TUFLOW files

SMS will save the TUFLOW input files in the TUFLOW directory for that simulation. If one does not already exist, the user will be prompted to select a location.

• Launch TUFLOW

Launches TUFLOW using input files that have previously been exported.

• Save Project, Export and Launch TUFLOW

Saves the project, writes out the TUFLOW input files, and launches TUFLOW.

• 2D Model Control

Brings up the 2D Model Control dialog where various model parameters are set. See TUFLOW 2D Model Control page.

• 1D Control

Brings up the Control 1D dialog where various model parameters are set. See Model Parameters page.

• Model Check

Causes SMS to perform a check for invalid settings that could prevent TUFLOW from running properly. If errors are found, they will be reported in the Model Check dialog with information on how to correct them.

Earlier TUFLOW Menu

The following menu commands are available in the TUFLOW Menu:

Note: As of SMS 11.1, the TUFLOW menu has been removed from the menu bar.

• Cell Attributes

File:TUFLOW Cell Attributes.jpg

TUFLOW Cell Attributes dialog

This command is enabled when one or more cells on a TUFLOW grid are selected. The attributes that can be set using this command are the cell code and the option to override the global initial water level (set in the 2D Model Control). The cell code (water cell, inactive cell – in mesh, inactive cell – not in mesh) for the selected cells will only be used if Specify cell by cell is selected in Cell codes section of the TUFLOW Grid Options dialog.

• Assign Material Type

This command is enabled when one or more cells on a TUFLOW grid are selected. The command will open the Materials Data dialog. The Materials Data dialog will allow selecting a material to assign to a cell. The material set for the cell will only be used if Specify cell by cell is selected in the Materials section of the TUFLOW Grid Options dialog.

Related Topics

• TUFLOW
• TUFLOW Simulation