GMS:3D Mesh Commands
From XMS Wiki
Jump to navigationJump to search
The Mesh menu is available when the 3D Mesh module is active. The menu has one submenu: the Convert To submenu. The menu contains the following commands:
| Menu Command | Description |
|---|---|
| New 3D Mesh | Creates a new, empty 3D mesh. |
| Lock All Nodes | Since it is possible to accidentally drag points, nodes can be "locked" to prevent them from being dragged or edited by toggling on this command. |
| Find Duplicate Nodes... | Selects nodes that are close to each other within a user specified tolerance. |
| Find Element... | Selects an element given the element ID. |
| Find Node... | Selects a node given the node ID. |
| Tessellate | 3D equivalent of Delauney triangulation. Creates a 3D tet mesh from mesh nodes. |
| Renumber | Renumbers mesh nodes eliminating gaps in numbering. Optionally a node string can be created and used to guide the renumbering. |
| Repack Nodes... | |
| Refine Elements... | Subdivides elements into smaller elements. |
| Classify Elements | Element materials are assigned based on the solid the element centroid is within. |
| Iso-surface Options... | |
| Iso-surface Volumes... | |
| Mesh → 3D Scatter Points | A new 3D scatter point set is created from the 3D mesh nodes. |
| 3D Mesh → 2D Mesh | Creates a 2D mesh from the upward facing elements of the 3D mesh. |
| New Material Set | |
| Export | Exports a 3D mesh to a file (*.3dm, *.fem etc). |
GMS – Groundwater Modeling System | ||
|---|---|---|
| Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids |  |
| Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
| Aquaveo | ||
