GMS:MODPATH Zone Codes: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{MODPATH Links}}
{{MODPATH Links}}
When post-processing the results of the MODPATH simulation, the colors of the paths or particles can be varied depending on the zone code of the cell in which the particle started or in which the particle terminated. Zone codes are assigned using the IBOUND array in the MODFLOW interface. In other words, unique values of the IBOUND array (100, 200, 300, etc.) are assigned to the cells of the grid to define the zone codes. The zone code array can be edited by clicking on the '''Zone Code Array''' command in the ''MODPATH'' menu. This command is only available if a MODFLOW simulation exists.
When post-processing the results of the MODPATH simulation, the colors of the paths or particles can be varied depending on the zone code of the cell in which the particle started or in which the particle terminated. Zone codes are assigned using the IBOUND array in the MODFLOW interface. In other words, unique values of the IBOUND array (100, 200, 300, etc.) are assigned to the cells of the grid to define the zone codes. The zone code array can be edited by clicking on the '''Zone Code Array''' command in the ''MODPATH'' menu. This command is only available if a MODFLOW simulation exists.
[[File:ZoneTypeArray.jpg|thumb|none|left|450 px|''Zone Type Array'' dialog]]
[[File:ZoneTypeArray.png|thumb|none|left|450 px|''Zone Type Array'' dialog]]


===Cell Properties===
===Cell Properties===
The ''Zone Code'' for each cell can also be edited by selecting a cell and then choosing the '''Cell Properties''' command from the ''MODPATH'' menu.  In addition to the zone code, cell porosity can be edited in the ''3D Grid Cell Properties'' dialog.
The ''Zone Code'' for each cell can also be edited by selecting a cell and then choosing the '''Cell Properties''' command from the ''MODPATH'' menu.  In addition to the zone code, cell porosity can be edited in the ''3D Grid Cell Properties'' dialog.
[[File:3DGridCellPropMOD.jpg|thumb|none|left|325 px|''3D Grid Cell Properties'' dialog showing the ''MODFLOW'' tab.]]
[[File:3DGridCellPropMOD.png|thumb|none|left|425 px|''3D Grid Cell Properties'' dialog showing the ''MODFLOW'' tab.]]


==Related Topics==
==Related Topics==

Latest revision as of 22:58, 21 November 2022

MODPATH
Pre-processing
MODPATH Commands
MODPATH Particle Tracking
MODPATH Particle Sets
MODPATH Zone Codes
Post-processing
MODPATH Display Options
Exporting Pathlines
Tutorials
MODPATH Tutorials

When post-processing the results of the MODPATH simulation, the colors of the paths or particles can be varied depending on the zone code of the cell in which the particle started or in which the particle terminated. Zone codes are assigned using the IBOUND array in the MODFLOW interface. In other words, unique values of the IBOUND array (100, 200, 300, etc.) are assigned to the cells of the grid to define the zone codes. The zone code array can be edited by clicking on the Zone Code Array command in the MODPATH menu. This command is only available if a MODFLOW simulation exists.

Zone Type Array dialog

Cell Properties

The Zone Code for each cell can also be edited by selecting a cell and then choosing the Cell Properties command from the MODPATH menu. In addition to the zone code, cell porosity can be edited in the 3D Grid Cell Properties dialog.

3D Grid Cell Properties dialog showing the MODFLOW tab.

Related Topics