GMS:Exporting Pathlines

From XMS Wiki
(Redirected from GMS:Capture Zones to Arcs)
Jump to navigationJump to search
MODPATH
Pre-processing
MODPATH Commands
MODPATH Particle Tracking
MODPATH Particle Sets
MODPATH Zone Codes
Post-processing
MODPATH Display Options
Exporting Pathlines
Tutorials
MODPATH Tutorials

MODPATH pathlines can be exported from GMS in a few different ways:

Capture Zones to Arcs

The MODPATH | Capture Zones → Arcs command will convert the capture zone outline to feature arcs, creating a separate coverage for each well. Coverages can be exported as a shapefile or converted to CAD data. Capture zones are defined using the Delineate by well and Delineate by zone code options in the MODPATH Display Options dialog.

Pathlines to Arcs

The MODPATH | Pathlines → Arcs command works similar to the MODPATH | Capture Zones → Arcs but instead of converting the capture zone boundary, all of the pathlines in the capture zone are converted.

Starting Locations to 3D Scatter Points

Starting locations can be converted to 3D scatter points and vice versa. If the MODPATH | Starting Locations → 3D Scatter Points menu command is selected, a new 3D scatter point set will be created from each particle set that is visible. If the command is executed by right-clicking on a particle set Particle Set Icon.svg in the Project Explorer, a new 3D scatter point set will be created from only that particle set.

Tab delimited file

Pathlines can be exported by right-clicking on a particle set in the Project Explorer and selecting the Export option. This saves the pathline geometry to a tab-delimited text file that can be imported directly into Excel:

Modpath export file.png

Right-clicking on the particle set data Generic Folder.svg folder and selecting the Export command will generate tab-delimited text file with all particle sets in the data folder included in the file.

Spreadsheet report

The user can bring up a spreadsheet report showing the pathline XYZ data in GMS. See MODPATH Particle Sets, Spreadsheet Report.