A finite element mesh can be saved in a generic format defined by SMS, called the 2dm format. In addition, the Generic Model interface in the Mesh module uses this format to save a template definition, in addition to model parameter, material property, and boundary condition assignments for a specific simulation. When a *.2dm file is opened, the current numerical model changes to the Generic Model interface. To save a numerical model definition as a template file, first set up the template and save a *.2dm file before any nodes are created.

Mesh Cards

Card Type	MESH2D
Description	Identifies the file as a 2d mesh file. Must be the first line of the file.
Required	YES

Card Type	NUM_MATERIALS_PER_ELEM
Description	Defines number of materials per element
Required	YES
Format	MATERIALS Quantity
Sample	NUM_MATERIALS_PER_ELEM 2
Field	Variable	Value	Description
1	Quantity	+ integer	Number of materials

Nodes

Card Type	ND
Description	Defines the ID and location for each node of the mesh.
Required	NO
Format	ND id x y z
Sample	ND 1 7.75e+005 1.10e+005 5.00e-001
Field	Variable	Value	Description
1	id	+ integer	The ID of the node.
2–4	x,y,z	± real number	The x, y, and z coordinates of the point.
Note: The xyz positions are positive/negative one digit with eight decimal places followed by “e” (times ten to the…) positive/negative power real numbers.

Linear Elements

Card Type	E2L
Description	Identifies a 2-noded linear element.
Required	NO
Format	E2L id n₁ n₂ matid
Sample	E2L 1 1 2 1
Field	Variable	Value	Description
1	id	+ integer	The ID of the element.
2–3	n₁ - n₂	+ integer	The ID's of nodes in the element.
4	matid	+ integer	The ID of the material assigned to the element.

Card Type	E3L
Description	Identifies a 3-noded linear element.
Required	NO
Format	E3L id n₁ n₂ n₃ matid
Sample	E3L 1 1 2 3 1
Field	Variable	Value	Description
1	id	+ integer	The ID of the element.
2–4	n₁ - n₃	+ integer	The ID's of nodes in the element.
5	matid	+ integer	The ID of the material assigned to the element.

Triangular Elements

Card Type	E3T
Description	Identifies a 3-noded triangular element.
Required	NO
Format	E3T id n₁ n₂ n₃ matid
Sample	E3T 1 1 2 3 1
Field	Variable	Value	Description
1	id	+ integer	The ID of the element.
2–4	n₁ - n₃	+ integer	The ID's of nodes in the element.
5	matid	+ integer	The ID of the material assigned to the element.

Card Type	E6T
Description	Identifies a 6-noded triangular element.
Required	NO
Format	E6T id n₁ n₂ n₃ n₄ n₅ n₆ matid
Sample	E6T 1 1 2 3 1
Field	Variable	Value	Description
1	id	+ integer	The ID of the element.
2–7	n₁ - n₆	+ integer	The ID's of nodes in the element.
8	matid	+ integer	The ID of the material assigned to the element.

Note: The E3T, E4Q, E6T, E8Q and E9Q cards may be intermixed in the written order. The mesh is written by starting with one element and listing neighboring elements. The node IDs for these cards are in counterclockwise order around the element (ending with the centroid node for EQ9s). Each card will be written only if an element of the type is present in the mesh.

Quadrilateral Elements

Card Type	E4Q
Description	Identifies a 4-noded quadrilateral element.
Required	NO
Format	E4Q id n₁ n₂ n₃ n₄ matid
Sample	E4Q 1 1 2 3 4 1
Field	Variable	Value	Description
1	id	+ integer	The ID of the element.
2–5	n₁ - n₄	+ integer	The ID's of nodes in the element.
6	matid	+ integer	The ID of the material assigned to the element.

Card Type	E8Q
Description	Identifies an 8-noded quadrilateral element.
Required	NO
Format	E8Q id n₁ n₂ n₃ n₄ n₅ n₆ n₇ n₈ matid
Sample	E8Q 1 1 2 3 4 5 6 7 8 1
Field	Variable	Value	Description
1	id	+ integer	The ID of the element.
2–9	n₁ - n₈	+ integer	The ID's of nodes in the element.
10	matid	+ integer	The ID of the material assigned to the element.

Card Type	E9Q
Description	Identifies an 9-noded quadrilateral element.
Required	NO
Format	E9Q id n₁ n₂ n₃ n₄ n₅ n₆ n₇ n₈ n₉ matid
Sample	E9Q 1 1 2 3 4 5 6 7 8 9 1
Field	Variable	Value	Description
1	id	+ integer	The ID of the element.
2–10	n₁ - n₉	+ integer	The ID's of nodes in the element.
11	matid	+ integer	The ID of the material assigned to the element.

Note: The E3T, E4Q, E6T, E8Q and E9Q cards may be intermixed in the written order. The mesh is written by starting with one element and listing neighboring elements. The node IDs for these cards are in counterclockwise order around the element (ending with the centroid node for EQ9s). Each card will be written only if an element of the type is present in the mesh.

Nodestrings

Card Type

NS

Description

Identifies a nodestring.

Required

NO

Format

NS n₁ n₂ n₃ ... - n_n (number of nodes in nodestring)

Sample

NS       1      3     10     15      6     -2
NS     126    127    128    129    173   -194
NS    1006    988    987    989    968    948    931    930    929    906
NS    -904
NS     720    701    699    686    680    664    649    648    647    640
NS    -621

Field

Variable

Value

Description

n₁ - n_n (number of nodes in nodestring)

n_x

+ integer

The ID's of the nodes in the nodestring. The last node id is written as a negative number, thus signaling the nodestring's end. Multiple NS cards can be used on consecutive lines for a single nodestring.

Note: The nodestring tail is denoted by a negative sign in front of the tail node ID. A nodestring may consist of more than ten nodes which constitute a file line, consequently a nodestring may extend multiple NS cards. Each sequential line should be read until the negative tail node ID is found, ending the nodestring definition. If no nodestrings are present in the mesh, this card will not be written.

Note: Node IDs for all cards above are limited to six digits (i.e. 999999 maximum).

Model Parameter Definition Cards

The model control parameters, boundary conditions and material options available for a specific model are defined in the generic model parameter definition section of the 2D mesh file. The generic model parameter definition section is begun by specifying the BEGPARAMDEF card and ended with the ENDPARAMDEF card.

Starting with SMS version 11.0, all of the parameter cards follow a similar pattern and the available options for several of the types of parameters were increased. The pattern is similar for global parameters, GP, boundary conditions BC, and materials MAT. More information can be found in each individual card.

Global Parameters	Boundary Conditions	Materials	Description
GP	BC	MAT	Name,Id
GP_DEF	BC_DEF	MAT_DEF	definitions
GP_OPTS	BC_OPTS	MAT_OPTS	options
GP_VAL	BC_VAL	MAT_VAL	values
(parent, so it has no dependencies)	BC_DEP	MAT_DEP	dependencies

Card Type	BEGPARAMDEF
Description	Identifies the beginning of the model parameter definition section of the 2D mesh file.
Required	Required if model parameters are to be defined.

Card Type	ENDPARAMDEF
Description	Identifies the end of the model parameter definition section of the 2D mesh file.
Required	Required if model parameters are to be defined.

Global Parameters

Field	Variable	Value	Description
Card Type	GM
Description	Identifies the model name.
Required	NO
Format	GM name
Sample	GM "Gen2DM"
1	name	string	Model name.
Note: Text is always delimited by quotation marks.

Field	Variable	Value	Description
Card Type	SI
Description	Identifies the model units.
Required	NO
Format	SI val
Sample	SI 0
1	val	boolean	Enter 0 for Meters Enter 1 for U.S. Survey Feet Enter 2 for Geographic (Lat/Lon) Enter 3 for International Feet

Field	Variable	Value	Description
Card Type	DY
Description	Identifies whether the model is dynamic or steady state.
Required	NO
Format	DY val
Sample	DY 1
1	val	boolean	Enter 0 for steady state. Enter 1 for dynamic.

Field	Variable	Value	Description
Card Type	TU
Description	Identifies the model time units.
Required	NO
Format	TU val
Sample	TU seconds
1	val	string	A string value describing the model units (days, hours, minutes, seconds, etc.).

Field	Variable	Value	Description
Card Type	TD
Description	Identifies the model time step and total simulation time.
Required	NO
Format	TD time_step total_time
Sample	TD 20 1000
1	time_step	+ real number	Time step (for dynamic simulations).
1	total_time	+ real number	Total simulation run time (for dynamic simulations).
Note: TD data is written as an integer when possible or written as a real number if decimal places are not all zeroes.

Field	Variable	Value	Description
Card Type	KEY
Description	Identifies the key to unlock and edit the model definition inside of the SMS interface.
Required	NO
Format	KEY key
Sample	KEY "sms-gen2dm"
1	key	string	Case sensitive key to unlock and edit the model definition.

Field	Variable	Value	Description
Card Type	DISP_OPTS entity DISP_OPTS inactive DISP_OPTS multiple
Description	How a specific display option... colors, line thickness, etc. entity – the main attribute (will either be the node, element, or nodestring display option) inactive – display option for inactive or unassigned multiple – display option for multiple assigned
Required	NO
Format	DISP_OPTS EntityId Red Green Blue Display Pattern Width Style
Sample	DISP_OPTS entity 1 0 0 0 1 0 1 0
Sample	DISP_OPTS multiple 1 0 0 0 1 0 1 0
1	EnitityId	integer (0–2) 0 = node 1 = nodestring 2 = element	id of the group it belongs to.
2	Red	integer (0–255)	red pixels
3	Green	integer (0–255)	green pixels
4	Blue	integer (0–255)	blue pixels
5	Display	boolean (0,1)	turned on = 1, turned off = 0
6	Pattern	integer	display pattern
7	Width	integer	width
8	Style	integer	style pattern

Global Parameter Assignment Cards

integer
Card Type	GP
Description	Defines a global parameter group
Required	NO
Format	GP Id Name Active
Sample	GP 1 "Hydro" 1
Field	Variable	Value	Description
1	id
id
2	name	string	name
3	active	boolean	0 = inactive 1 = active

Card Type	GP_DEF
Description	Global Parameter Defaults
Required	NO
Format	The format will depend up the type (field 4). Fields 5, 6, and 7 will be impacted by the choice of field 4. Note that the min and max information is only applicable to integer and double types. bool, integer, double, text, or options : GP_DEF GroupId ParamId Name Type Default Min Max curve: GP_DEF GroupId ParamId Name Type x_axis_title y_axis_title Float/Curve: GP_DEF GroupId ParamId Name Type Float_Default Float_Min Float_Max DefaultFloatOrCurve x_axis_title y_axis_titleGP param_name val
Sample	Values depend upon type (see format). bool, integer, double, text or options : GP_DEF 1 1 "manning n" 1 0 0 10 curve: GP_DEF 1 1 "manning n" 5 "x-axis" "y-axis" Float/Curve: GP_DEF 1 1 "manning n" 6 0.2 0.0 1.0 CURVE "x-axis" "y-axis"
Field	Variable	Value	Description
1	group Id	+ integer	id of the global parameter group that it belongs to
2	param Id	string	its id
3	name	string	its name
4	type	int	0-Bool, 1-Integer, 2-Double, 3-Text, 4-Options, 5-Curve, 6-Float/Curve
5	default or x_axis_title (curve)	type specific () string	default value x-axis title when bringing up curve editor
6	min or y_axis_title (curve)	type specific (min) string	minimum value y-axis title when bringing up curve editor
7	max	type specific (max)	max value
8 (only float/curve)	DefaultFloatOrCurve	string either "FLOAT" "CURVE"	The default version float or integer that is seen
9 (only float/curve)	x_axis_title	string	x-axis title when bringing up curve editor
10 (only float/curve)	y_axis_title	string	y-axis title when bringing up curve editor
Note: The GP_OPTS card is only written when the previous GP_DEF card has a parameter type of four. The default value of the option parameter should be one of the options list in the GP_OPTS card line. Note: Maximum/minimum integer values of 2147483648 and -2147483647 are understood as no bounds. The integer limits are characterized by four bytes. Maximum/minimum real number values of 1.79769e+308 and -1.79769e+308 are understood as no bounds. The real number limits are characterized by eight bytes.

Card Type	GP_VAL
Description	Global parameters values
Required	NO
Format	GP_VAL GroupId ParamId (CURVE or FLOAT only if type is float/curve) Value
Sample	GP_VAL 1 1 30.23
Sample	GP_VAL 1 2 "Manning"
Field	Variable	Value	Description
1	Group Id	+ integer	id of the global parameter group that it belongs to
2	Param Id	+ integer	its id
3	Value	varies depending on type	value

Card Type	GP_DEP
Description	Global Parameters dependencies
Required	NO
Format	GP_DEP GroupId ParamId Type Parent ParentActive Opts OptsValue
Sample	GP_DEP 1 7 "PARENT_SELF" "Friction type" 0 "Manning" 0 "Chezy" 1
Field	Variable	Value	Description
1	Group Id	+ integer	id of the global parameter group that it belongs to
2	Param Id	+ integer	its id
3	Type	string valid values are: PARENT_UNASSGINED PARENT_NONE PARENT_LOCAL PARENT_GLOBAL PARENT_SELF	parent not assigned no parent parent is in the same group id parent is from global group or GP parent
4	Parent	+ integer	parent name
5	Parent Active	boolean	0 = inactive 1 = active
6	Opts	string	name of the option
7	OptsValue	boolean	whether this option is turned on/off

Boundary Condition Definition Cards

Card Type	BCPGC
Description	Defines whether or not to allow boundary condition / parameter group correlation.
Required	NO
Format	BCPGC val
Sample	BCPGC 1
Field	Variable	Value	Description
1	val	boolean	0 = Do not allow boundary condition / parameter group correlation. 1 = Allow boundary condition / parameter group correlation.

Card Type	BEDISP
Description	Defines inactive boundary condition display options and boundary condition label options.
Required	NO
Format	BEDISP entity_ID font_red font_green font_blue label_on label_vals_on inactive_size inactive_style inactive_red inactive_green inactive_blue inactive_on
Sample	BEDISP 0 2 0 0 0 1 1 1 255 128 255 1
Field	Variable	Value	Description
1	entity_ID	integer	0 = node 1 = nodestring 2 = element
2	font_red	integer	0–255, Red component of RGB triplet defining boundary condition font color.
3	font_green	integer	0–255, Green component of RGB triplet defining boundary condition font color.
4	font_blue	integer	0–255, Blue component of RGB triplet defining boundary condition font color.
5	label_on	boolean	0 = Do not display boundary condition labels. 1 = Display boundary condition labels.
6	label_vals_on	boolean	0 = Do not display boundary condition values in boundary condition labels. 1 = Display boundary condition values in boundary condition labels.
7	inactive_size	integer	1–63, Default size for inactive boundary condition node symbols. 1–50, Default size for inactive boundary condition element or nodestring symbols.
8	inactive_style	integer	Default style for inactive boundary condition symbols. For nodes 1 = Filled square 2 = Hollow square 3 = Filled circle 4 = Hollow circle 5 = Filled triangle 6 = Hollow triangle 7 = Filled diamond 8 = Hollow diamond 9 = Cross 10 = X 11 = Survey marker For elements or nodestrings: 0 = solid line 1 = dashed line
9	inactive_red	integer	0–255, Red component of RGB triplet defining inactive boundary condition font color.
10	inactive_green	integer	0–255, Green component of RGB triplet defining inactive boundary condition font color.
11	inactive_blue	integer	0–255, Blue component of RGB triplet defining inactive boundary condition font color.
12	inactive_on	boolean	0 = Do not display inactive boundary conditions. 1 = Display inactive boundary conditions.

Field	Variable	Value	Description
Card Type	BEFONT	Single integer method.
Description	Defines boundary condition label font attributes.
Required	NO
Format	BEFONT entity_id font_size
Sample	BEFONT 1 1
1	entity_ID	integer	0 = node 1 = nodestring 2 = element
2	font_size	integer	1 = Large font size. 2 = Small font size.
Note: The font information may be represented by a single integer or represented by multiple integers and a font name. Note: The BEDISP and BEFONT cards are written before the entity’s boundary condition and values (if any) are written. The next instance of these cards will begin the next entity. The entity type ID equals zero for node, one for nodestring and two for element.

Field	Variable	Value	Description
Card Type	BEFONT	Multiple value method.
Description	Defines boundary condition label font attributes.
Required	NO
Format	BEFONT entity_id height width escapement orientation weight italic underline strikeout charSet precision clipPrecision quality pitchAndFamily faceName
Sample	BEFONT 1 1
1	entity_ID	integer	0 = node 1 = nodestring 2 = element
2	height	integer	Font height.
3	width	integer	Font width.
4	escapement	integer	Font escapement.
5	orientation	integer	Font orientation.
6	weight	integer	Font weight.
7	italic	integer	Font italic.
8	underline	integer	Font underline.
9	strikeout	integer	Font strikeout.
10	charSet	integer	Font character set.
11	precision	integer	Font precision.
12	clipPrecision	integer	Font clip precision.
13	quality	integer	Font quality.
14	pitchAndFamily	integer	Font pitch and family.
15	faceName	string	Font face name.
Note: The font information may be represented by a single integer or represented by multiple integers and a font name. Note: The BEDISP and BEFONT cards are written before the entity’s boundary condition and values (if any) are written. The next instance of these cards will begin the next entity. The entity type ID equals zero for node, one for nodestring and two for element.

Card Type	BC_DISP_OPTS
Description	Boundary condition display options (how the boundary conditions are going to be displayed)
Required	NO
Format	BC_DISP_OPTS GroupId Red Green Blue Display Pattern Width Style
Sample	BC_DISP_OPTS 1 0 0 0 0 0 0 0 0
Field	Variable	Value	Description
1	Group Id	integer	0 = node 1 = nodestring 2 = element
2	Red	integer (0–255)	red pixels
3	Green	integer (0–255)	green pixels
4	Blue	integer (0–255)	blue pixels
5	Display	boolean (0,1)	turned on = 1, turned off = 0
6	Pattern	integer	displayed pattern
7	Width	integer	width
8	Style	integer	style pattern

Card Type	BEG2DMBC
Description	Identifies the beginning of the boundary condition assignment section of the 2D mesh file.
Required	Required if boundary conditions are assigned.

Card Type	END2DMBC
Description	Identifies the end of the boundary condition assignment section of the 2D mesh file.
Required	Required if boundary conditions are assigned.

Boundary Condition Assignment Cards

The following cards are used to assign values to the boundary conditions defined in using Boundary Condition Definition Cards:

Card Type	BC
Description	Defines input values required for a boundary condition.
Required	NO
Format	BC EntityId Name Id 0 LegalOnInterior ParamGroupCorrelation
Sample	BC 1 "Flow rate (cfs)" 1 0 1 "(none)" BC 1 "Water temperature (F)" 2 0 "Hydrodynamic" BC 1 "Flow rate(cfs)" 3 0 1 "(none)"
Field	Variable	Value	Description
1	entity id	integer	Entity id that the bc belongs to (NODE = 0, NDSTR =1, ELEM = 2
2	name	string	Name of value to be specified.
3	id	integer	The boundary conditions id.
4	filler	0	Always 0
5	legalOnInterior	boolean	0 = boundary condition is not legal on the interior of the mesh. 1 = boundary condition is legal on the interior of the mesh.
6	paramGroupCorrelation	string	Name of the parameter group (defined using the GP card) with which the boundary condition is correlated. If the boundary condition is not correlated with a parameter group, "none" should be specified.

Card Type	BC_DEF
Description	Boundary Condition Parameter Defaults
Required	NO
Format	The format will depend up the type (field 4). Fields 5, 6, and 7 will be impacted by the choice of field 4. Note that the min and max information is only applicable to integer and double types. bool, integer, double, text, or options : BC_DEF GroupId ParamId Name Type Default Min Max curve: BC_DEF GroupId ParamId Name Type x_axis_title y_axis_title Float/Curve: BC_DEF GroupId ParamId Name Type Float_Default Float_Min Float_Max DefaultFloatOrCurve x_axis_title y_axis_title
Sample	Values depend upon type (see format). bool, integer, double, text or options : BC_DEF 1 1 "manning n" 1 0 0 10 curve: BC_DEF 1 1 "manning n" 5 "x-axis" "y-axis" Float/Curve: BC_DEF 1 1 "manning n" 6 0.2 0.0 1.0 CURVE "x-axis" "y-axis"
Field	Variable	Value	Description
1	group Id	+ integer	id of the boundary condition group that it belongs to
2	param Id	string	its id
3	name	string	its name
4	type	int	0-Bool, 1-Integer, 2-Double, 3-Text, 4-Options, 5-Curve, 6-Float/Curve
5	default or x_axis_title (curve)	type specific string	default value x-axis title when bringing up curve editor
6	min or y_axis_title (curve)	type specific (min) string	minimum value y-axis title when bringing up curve editor
7	max	type specific (max)	max value
8 (only float/curve)	DefaultFloatOrCurve	string either "FLOAT" "CURVE"	The default version float or integer that is seen
9 (only float/curve	x_axis_title	string	x-axis title when bringing up curve editor
10 (only float/curve)	y_axis_title	string	y-axis title when bringing up curve editor

Card Type	BC_OPTS
Description	Boundary Condition options
Required	NO
Format	BC_OPTS GroupId, ParamId, Values
Sample	BC_OPTS 1 5 "a" "b" "c"
Field	Variable	Value	Description
1	group Id	+ integer	id of the boundary condition group that it belongs to
2	param Id	string	its id
3	values	string

Card Type	BC_VAL
Description	Boundary condition values
Required	NO
Format	BC_VAL N, E, S (Node, Elem or nodeString) Node or Elem Id, GroupId, ParamId, (CURVE or FLOAT only if type is float/curve) Value
Sample	BC_VAL S 1 1 2 2
Sample	BC_VAL S 1 1 2 CURVE 2
Sample	BC_VAL S 1 1 2 FLOAT 7.675
Field	Variable	Value	Description
1	N, E or S	+ integer	Node, Elem or Nodestring
2	Node, Elem, or Nodestring Id	+ integer	id of the node/element
3	group Id	+ integer	id of the group it belongs to
4	param Id	+ integer	id of the parameter it belongs to
5	value	varies depending on type	value
Note: These cards are only written if the data that exists is different than the default data.

Card Type	BC_DEP
Description	Boundary condition dependencies
Required	NO
Format	BC_DEP GroupId ParamId Type Parent ParentActive Opts OptsValue
Sample	BC_DEP 1 7 "PARENT_SELF" "Friction type" 0 "Manning" 0 "Chezy" 1
Field	Variable	Value	Description
1	Group Id	+ integer	id of the global parameter group that it belongs to
2	Param Id	+ integer	its id
3	Type	string valid values are: PARENT_UNASSGINED PARENT_NONE PARENT_LOCAL PARENT_GLOBAL PARENT_SELF	parent not assigned no parent parent is in the same group id parent is from global group or GP parent
4	Parent	+ integer	parent name
5	Parent Active	boolean	0 = inactive 1 = active
6	Opts	string	name of the option
7	OptsValue	boolean	whether this option is turned on/off

Material Properties Cards

Card Type	MAT_MULTI
Description	Is Material Assignment Multiple
Required	NO
Format	MAT_MULTI Assigned
Sample	MAT_MULTI 1
Sample	MAT_MULTI 0
Field	Variable	Value	Description
1	assigned	boolean	0 - Single, 1 - Multiple

Card Type	MAT_PARAMS
Description	Material Parameters Assigned
Required	NOT NEEDED IF MAT_MULTI 0
Format	MAT_PARAMS MaterialId, GroupId (1 or More)
Sample	MAT_PARAMS 1 2 3 5
Sample	MAT_PARAMS 1 1
Field	Variable	Value	Description
1	Material Id	+ integer	id of the material
2	Group id	+ integer	id of the assigned group

Material Properties Assignment Cards

Card Type	MAT
Description	Defines the assigned material properties.
Required	NO
Format	MAT ID "name"
Sample	MAT 1 "Clay"
Field	Variable	Value	Description
1	mat_ID	+ integer	Material id (sequentially numbered, starting at 1). The disabled material is always id 0 and does not need to be specified in the 2DM file.
2	name	string	The name of the material. Should be unique.

Card Type	MAT_DEF
Description	Material Parameters defaults
Required	NO
Format	The format will depend up the type (field 4). Fields 5, 6, and 7 will be impacted by the choice of field 4. Note that the min and max information is only applicable to integer and double types. bool, integer, double, text, or options : MAT_DEF GroupId ParamId Name Type Default Min Max curve: MAT_DEF GroupId ParamId Name Type x_axis_title y_axis_title Float/Curve: MAT_DEF GroupId ParamId Name Type Float_Default Float_Min Float_Max DefaultFloatOrCurve x_axis_title y_axis_title
Sample	Values depend upon type (see format). bool, integer, double, text or options : MAT_DEF 1 1 "manning n" 1 0 0 10 curve: MAT_DEF 1 1 "manning n" 5 "x-axis" "y-axis" Float/Curve: MAT_DEF 1 1 "manning n" 6 0.2 0.0 1.0 CURVE "x-axis" "y-axis"
Field	Variable	Value	Description
1	group id	+ integer	id of the material group that it belongs to.
2	param id	string	its id
3	name	string	its name
4	type	int	0-Bool, 1-Integer, 2-Double, 3-Text, 4-Options, 5-Curve, 6-Float/Curve
5	default or x-axis_title (curve)	type specific string	default value x-axis title when bringing up curve editor
6	min or y-axis_title (curve)	type specific (min) string	minimum value y-axis title when bringing up curve editor
7	max	type specific (max)	max value
8 (only float/curve)	DefaultFloatOrCurve	string either "FLOAT" "CURVE"	The default version float or integer that is seen
9 (only float/curve)	x_axis_title	string	x-axis title when bringing up curve editor
10 (only float/curve)	y_axis_title	string	y-axis title when bringing up curve editor

Card Type	MAT_OPTS
Description	Material options
Required	NO
Format	MAT_OPTS GroupId, ParamId, Values
Sample	MAT_OPTS 1 5 "a" "b" "c"
Field	Variable	Value	Description
1	group id	+ integer	id of the boundary condition group that it belongs to
2	param id	+ integer	its id
3	values	string

Card Type	MAT_VALS
Description	Material values
Required	NO
Format	MAT_VAL MaterialId, GroupId, ParamId, (CURVE or FLOAT only if type is float/curve) Value
Sample	MAT_VAL S 1 1 2 2
Sample	MAT_VAL 2 1 8 VALUE 8.8888
Sample	MAT_VAL 2 1 8 CURVE 1
Field	Variable	Value	Description
1	material id	+ integer	id of the material
2	group id	+ integer	id of the group it belongs to
3	param id	string	id of the parameter it belongs to
4	VALUE or CURVE	string	Only if type is float/curve
5	value	varies depending on type	value

Card Type	MAT_DEP
Description	Material dependencies
Required	NO
Format	MAT_DEP GroupId ParamId Type Parent ParentActive Opts OptsValue
Sample	MAT_DEP 1 7 "PARENT_SELF" "Friction type" 0 "Manning" 0 "Chezy" 1
Field	Variable	Value	Description
1	GroupId	+ integer	id of the global parameter group that it belongs to
2	ParamId	+ integer	its id
3	Type	string valid values are: PARENT_UNASSGINED PARENT_NONE PARENT_LOCAL PARENT_GLOBAL PARENT_SELF	parent not assigned no parent parent is in the same group id parent is from global group or GP parent
4	Parent	+ integer	parent name
5	ParentActive	boolean	0 = inactive 1 = active
6	Opts	string	name of the option
7	OptsValue	boolean	whether this option is turned on/off

Time Series Data Cards

Card Type	BEGCURVE Version: version
Description	Identifies the beginning of the time series data section of the 2D mesh file.
Required	NO
Format	BEGCURVE
Sample	BCE 2 2 300
Field	Variable	Value	Description
1	version	+ integer	Used to version file format for the curve portion of the file.
Note: Version 1 writes the time series data using the XY series file, XYS format within the 2D mesh file. See XY series files (*.xys) for a description of the cards used to define the time series data.

Card Type	ENDCURVE
Description	Identifies the end of the time series data section of the 2D mesh file.
Required	NO

Obsolete Cards

The following cards are no longer used in SMS:

PG, PD, PO, GG, GP, BD, BV, MD, MV, BCE, BCN, BCS, TIME, BEDISP

Changes from 10.1 to 11.0

New Cards:

NUM_MATERIALS_PER_ELEM
GP replaces PG
GP_DEF replaces PD
GP_VAL
GP_DEP
BC replaces BD
BC_DEF replaces BV card
BC_OPTS replaces PO card
BC_VAL replaces BC card
BC_DEP
BC_DISP_OPTS replaces bedisp
MAT_MULTI
MAT_PARAMS
MAT_DEF replaces MV card
MAT_OPTS
MAT_VAL
MAT_DEP
DISP_OPTS entity
DISP_OPTS inactive
DISP_OPTS multiple

Sample File 1

BEGCURVE Version: 1
XYS 1 29 "new_series"
0.0 3000.0
1.5 3000.0
2.5 3050.0
3.0 3150.0
3.5 3300.0
4.0 3500.0
4.5 3700.0
5.0 3950.0
5.5 4150.0
6.0 4350.0
6.5 4550.0
7.0 4700.0
7.45 4825.0
8.0 4925.0
8.5 4975.0
9.0 5000.0
9.5 4975.0
10.0 4800.0
10.5 4500.0
11.0 4250.0
11.5 4000.0
12.0 3750.0
13.0 3500.0
14.0 3350.0
15.5 3200.0
17.5 3100.0
19.5 3050.0
22.0 3000.0
25.0 3000.0
XYS 3 29 "new_series"
0.0 3000.0
1.5 3000.0
2.5 3050.0
3.0 3150.0
3.5 3300.0
4.0 3500.0
4.5 3700.0
5.0 3950.0
5.5 4150.0
6.0 4350.0
6.5 4550.0
7.0 4700.0
7.45 4825.0
8.0 4925.0
8.5 4975.0
9.0 5000.0
9.5 4975.0
10.0 4800.0
10.5 4500.0
11.0 4250.0
11.5 4000.0
12.0 3750.0
13.0 3500.0
14.0 3350.0
15.5 3200.0
17.5 3100.0
19.5 3050.0
22.0 3000.0
25.0 3000.0
XYS 5 29 "new_series"
0.0 3000.0
1.5 3000.0
2.5 3050.0
3.0 3150.0
3.5 3300.0
4.0 3500.0
4.5 3700.0
5.0 3950.0
5.5 4150.0
6.0 4350.0
6.5 4550.0
7.0 4700.0
7.45 4825.0
8.0 4925.0
8.5 4975.0
9.0 5000.0
9.5 4975.0
10.0 4800.0
10.5 4500.0
11.0 4250.0
11.5 4000.0
12.0 3750.0
13.0 3500.0
14.0 3350.0
15.5 3200.0
17.5 3100.0
19.5 3050.0
22.0 3000.0
25.0 3000.0
XYS 7 29 "new_series"
0.0 3000.0
1.5 3000.0
2.5 3050.0
3.0 3150.0
3.5 3300.0
4.0 3500.0
4.5 3700.0
5.0 3950.0
5.5 4150.0
6.0 4350.0
6.5 4550.0
7.0 4700.0
7.45 4825.0
8.0 4925.0
8.5 4975.0
9.0 5000.0
9.5 4975.0
10.0 4800.0
10.5 4500.0
11.0 4250.0
11.5 4000.0
12.0 3750.0
13.0 3500.0
14.0 3350.0
15.5 3200.0
17.5 3100.0
19.5 3050.0
22.0 3000.0
25.0 3000.0
XYS 9 29 "new_series"
0.0 3000.0
1.5 3000.0
2.5 3050.0
3.0 3150.0
3.5 3300.0
4.0 3500.0
4.5 3700.0
5.0 3950.0
5.5 4150.0
6.0 4350.0
6.5 4550.0
7.0 4700.0
7.45 4825.0
8.0 4925.0
8.5 4975.0
9.0 5000.0
9.5 4975.0
10.0 4800.0
10.5 4500.0
11.0 4250.0
11.5 4000.0
12.0 3750.0
13.0 3500.0
14.0 3350.0
15.5 3200.0
17.5 3100.0
19.5 3050.0
22.0 3000.0
25.0 3000.0
XYS 11 29 "new_series"
0.0 3000.0
1.5 3000.0
2.5 3050.0
3.0 3150.0
3.5 3300.0
4.0 3500.0
4.5 3700.0
5.0 3950.0
5.5 4150.0
6.0 4350.0
6.5 4550.0
7.0 4700.0
7.45 4825.0
8.0 4925.0
8.5 4975.0
9.0 5000.0
9.5 4975.0
10.0 4800.0
10.5 4500.0
11.0 4250.0
11.5 4000.0
12.0 3750.0
13.0 3500.0
14.0 3350.0
15.5 3200.0
17.5 3100.0
19.5 3050.0
22.0 3000.0
25.0 3000.0
XYS 13 8 "new_series"
0.0 237.35
24.0 137.9
48.0 1347.4
72.0 351.05
96.0 1465.25
120.0 1247.1
144.0 847.35
168.0 731.75
XYS 14 8 "Curve"
0.0 1600.7
24.0 700.85
48.0 1353.7
72.0 712.25
96.0 866.6
120.0 1626.35
144.0 567.6
168.0 980.55
XYS 15 8 "Curve"
0.0 1240.7
24.0 772.25
48.0 741.3
72.0 908.45
96.0 599.45
120.0 522.8
144.0 946.8
168.0 170.4
XYS 16 8 "Curve"
0.0 1252.55
24.0 1467.95
48.0 876.25
72.0 250.2
96.0 479.95
120.0 981.65
144.0 1432.4
168.0 1382.8
XYS 17 8 "Curve"
0.0 1507.65
24.0 202.6
48.0 905.3
72.0 1051.45
96.0 434.95
120.0 267.5
144.0 547.95
168.0 349.2
ENDCURVE

Sample File 2

Sample files are available in the SMS tutorials in the Generic Model tutorial under the models section.

MESH2D
E3T      1      4      1      3      2
E3T      2      2      5      6      2
E4Q      3      7      8      5      2      2
.
.
.
E4Q   1543    205   1226   1225   1221      2
E4Q   1544    191   1222   1226    189      1
E3T   1545    205    189   1226      2
ND      1 -7.62907961e+001 4.00243909e+001 8.41808447e+001
ND      2 -7.62907174e+001 4.00219296e+001 8.36614138e+001
ND      3 -7.62907700e+001 4.00238340e+001 7.32122342e+001
.
.
.
ND   1222 -7.62811008e+001 4.00272795e+001 7.28898113e+001
ND   1225 -7.62814608e+001 4.00273631e+001 7.29479847e+001
ND   1226 -7.62812859e+001 4.00271526e+001 7.41231480e+001
NS       1      3     10     15      6     -2
NS     126    127    128    129    173   -194
NS    1006    988    987    989    968    948    931    930    929    906
NS    -904
NS     720    701    699    686    680    664    649    648    647    640
NS    -621
BEGPARAMDEF
GM  "Gen2DM"
SI  0
DY  1
TU  "minutes"
TD  20  1000
KEY  "sms-gen2dm"
PG  "Hydrodynamic" 1
PD  "Time interval" 1 20 0 2147483647
PD  "Velocity max (ft/sec)" 2 75 0 100
PD  "H min" 2 0.25 0 1.79769e+308
PD  "A min" 2 1 1e-015 1.79769e+308
PD  "Check for dry elements" 0 1
PD  "Element style" 3 "quadratic"
PD  "Critical scour velocity" 4 "2.0 ft/sec"
PO  "0.8 ft/sec" "2.0 ft/sec" "2.6 ft/sec"
PG  "Sediment transport" 0
PD  "Time interval" 1 10 0 2147483647
PD  "Source X postion" 2 0 -1.79769e+308 1.79769e+308
PD  "Source Y position" 2 0 -1.79769e+308 1.79769e+308
PD  "Source elevation" 2 0 -1.79769e+308 1.79769e+308
PD  "Parcel mass (slug)" 2 0.5 0.0001 1.79769e+308
PD  "Particle mass (slug)" 2 0.003 0.0001 1.79769e+308
PD  "Particle size (in)" 2 0.05 0 1.79769e+308
PD  "Deviation" 2 0 -1.79769e+308 1.79769e+308
PD  "Average density (slug/ft^3)" 2 3 1.5 6
NUME  3
BCPGC  1
BEDISP  0 2 0 0 0 1 1 1 255 128 255 1
BEFONT  0 1
BD  0 "Water sink/source" 2 3 "Flow rate (cfs)" "Water temperature (F)" "Flow rate(cfs)" 1 "(none)"
BV  "Flow rate (cfs)" 0 -1.79769e+308 1.79769e+308
BV  "Water temperature (F)" 65 32.5 100
BV  "Flow rate(cfs)" 0 0 1.79769e+308
BCDISP  0 2 10 1 0 255 255 1
BD  0 "Ceiling (pressure flow)" 1 1 "Ceiling (ft above sea level)" 0 "(none)"
BV  "Ceiling (ft above sea level)" 0 -1.79769e+308 1.79769e+308
BCDISP  0 1 3 1 128 128 255 1
BD  0 "Water surface observation gauge" 3 0 1 "(none)"
BCDISP  0 3 3 1 255 128 128 1
BEDISP  1 0 0 255 1 1 1 0 255 128 0 1
BEFONT  1 1
BD  1 "Water surface" 1 3 "Elevation" "Essential/Natural factor" "Vary along nodestring factor" 0 "(none)"
BV  "Elevation" 0 -1.79769e+308 1.79769e+308
BV  "Essential/Natural factor" 0 0 1
BV  "Vary along nodestring factor" 1 0 10
BCDISP  1 1 5 0 255 0 0 1
BD  1 "Flow" 2 1 "Flow rate (cfs)" 0 "(none)"
BV  "Flow rate (cfs)" 0 0 1.79769e+308
BCDISP  1 2 5 0 128 255 0 1
BD  1 "Supercritical" 3 0 0 "(none)"
BCDISP  1 3 1 0 0 0 0 1
BD  1 "1D weir segment" 4 4 "Discharge coefficient" "Weir width (ft)" "Crest level (m above sea level)" "Equation (0 = water level / 1 = energy head)" 1 "(none)"
BV  "Discharge coefficient" 1 0 1.79769e+308
BV  "Weir width (ft)" 1 0 1.79769e+308
BV  "Crest level (m above sea level)" 0 -1.79769e+308 1.79769e+308
BV  "Equation (0 = water level / 1 = energy head)" 0 0 1
BCDISP  1 4 1 0 0 0 0 0
BD  1 "Sediment trap" 5 0 1 "Sediment transport"
BCDISP  1 5 1 0 0 0 0 1
BEDISP  2 2 0 0 0 1 1 0 0 0 0 1
BEFONT  2 1
BD  2 "2D weir" 1 3 "Discharge coefficient" "Crest level (ft above sea level)" "Equation (0 = water level / 1 = energy head)" 1 "(none)"
BV  "Discharge coefficient" 1 0 1.79769e+308
BV  "Crest level (ft above sea level)" 0 -1.79769e+308 1.79769e+308
BV  "Equation (0 = water level / 1 = energy head)" 0 0 1
BCDISP  2 1 1 0 0 0 0 1
MD  2 "Manning" "Kinematic eddy viscosity"
MV  "Manning" 0.035 0.01 0.18
MV  "Kinematic eddy viscosity" 0 -1.79769e+308 1.79769e+308
ENDPARAMDEF
BEG2DMBC
MAT  1 0.03 20
MAT  2 0.045 20
GG "Hydrodynamic"
GP "Time interval" 20
GP "Velocity max (ft/sec)" 75
GP "H min" 0.25
GP "A min" 1
GP "Check for dry elements" 1
GP "Element style" "quadratic"
GP "Critical scour velocity" "2.0 ft/sec"
GG "Sediment transport"
GP "Time interval" 10
GP "Source X postion" 0
GP "Source Y position" 0
GP "Source elevation" 0
GP "Parcel mass (slug)" 0.5
GP "Particle mass (slug)" 0.003
GP "Particle size (in)" 0.05
GP "Deviation" 0
GP "Average density (slug/ft^3)" 3
BCN  772 3
BCN  774 3
BCN  776 3
.
.
.
BCS  4 5
BCS  1 1 80 0 1
BCE  1293 1 1 0 0
TIME 20
BCS  2 2 380
TIME 40
BCS  2 2 400
TIME 60
BCS  2 2 380
TIME 80
BCS  2 2 300
TIME 100
BCS  2 2 300
TIME 120
BCS  2 2 300
TIME 140
BCS  2 2 300
TIME 160
BCS  2 2 300
TIME 180
BCS  2 2 300
TIME 200
BCS  2 2 300
TIME 220
BCS  2 2 300
TIME 240
BCS  2 2 300
TIME 260
BCS  2 2 300
TIME 280
BCS  2 2 300
TIME 300
BCS  2 2 300
TIME 320
BCS  2 2 300
TIME 340
BCS  2 2 300
TIME 360
BCS  2 2 300
TIME 380
BCS  2 2 300
TIME 400
BCS  2 2 300
TIME 420
BCS  2 2 300
TIME 440
BCS  2 2 300
TIME 460
BCS  2 2 300
TIME 480
BCS  2 2 300
TIME 500
BCS  2 2 300
TIME 520
BCS  2 2 300
TIME 540
BCS  2 2 300
TIME 560
BCS  2 2 300
TIME 580
BCS  2 2 300
TIME 600
BCS  2 2 300
TIME 620
BCS  2 2 300
TIME 640
BCS  2 2 300
TIME 660
BCS  2 2 300
TIME 680
BCS  2 2 300
TIME 700
BCS  2 2 300
TIME 720
BCS  2 2 300
TIME 740
BCS  2 2 300
TIME 760
BCS  2 2 300
TIME 780
BCS  2 2 300
TIME 800
BCS  2 2 300
TIME 820
BCS  2 2 300
TIME 840
BCS  2 2 300
TIME 860
BCS  2 2 300
TIME 880
BCS  2 2 300
TIME 900
BCS  2 2 300
TIME 920
BCS  2 2 300
TIME 940
BCS  2 2 300
TIME 960
BCS  2 2 300
TIME 980
BCS  2 2 300
TIME 1000
BCS  2 2 300
END2DMBC

v • e SMS – Surface-water Modeling System
Modules:	1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid
General Models:	3D Structure • FVCOM • Generic • PTM
Coastal Models:	ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM
Riverine/Estuarine Models:	AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV
Aquaveo • SMS Tutorials • SMS Workflows

SMS:2D Mesh Files *.2dm

Contents