SMS:RMA2 Steering Workflow

From XMS Wiki
Jump to navigationJump to search

To use RMA2 steering, use one of the follwing two processes:

1. Use the RMA2 spindown process. (recommended)
1. Start with an RMA2 model.
See the RMA2 Project Workflow if needed.
2. Start with a steering module.
  1. Select the Data | Steering Module menu command.
  2. In the Steerin Wizard, select the RMA2 Spindown option.
  3. Select spindown options.
  4. Run the RMA2 Spindown.
3. Load the spindown solution.
  1. Use the File | Open command to import the solution file (*.sol).
2. Use the RMA2 revisions process.
1. Start with an RMA2 model.
See the RMA2 Project Workflow if needed.
2. Start with a steering module.
  1. Select the RMA2 | Revisions menu command.
  2. In the RMA2 Revisions dialog, create new revisions.
3. Run the RMA2 model simulation.
  1. Save the project.
  2. Use the RMA2 | Run RMA2 command.
  3. Let the GFGEN model run.
  4. Let the RMA2 model run.


v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=SMS:RMA2_Steering_Workflow&oldid=125606"