GMS:Borehole Commands: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(30 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Infobox GMS Menus}}
{{Infobox GMS Commands}}
"Boreholes" menu in the [[GMS:Boreholes|Boreholes Module]].
When the Borehole module is active the ''Borehole'' menu become active. The menu has the following commands:
{| class="wikitable"
 
! Menu Command !! Description
; [[GMS:Creating_and_Editing_Boreholes|New Borehole]] : Creates a new Borehole.  
|-
; [[GMS:Creating_and_Editing_Boreholes|Borehole Editor...]] : Opens the ''Borehole Editor''.  
| [[GMS:Creating_and_Editing_Boreholes|''New Borehole'']] || Creates a new Borehole.
; [[GMS:Borehole_Cross_Sections|Cross Section Editor...]] : Brings up the ''Cross Section Editor'' dialog where one or multiple 2D cross sections between boreholes are filled.  
|-
; Lock All Boreholes : Turns off the ability to change the position (drag) of created boreholes.  
| [[GMS:Creating_and_Editing_Boreholes|''Borehole Editor...'']] || Opens the Borehole Editor.
; [[GMS:Creating_and_Editing_Boreholes#Auto_Select|Auto Select Contacts/Segments...]] : When one contact or segment is selected, automatically selects matching contacts or segments on other boreholes.  
|-
; [[GMS:Borehole_Cross_Sections#Automatic_creation|Auto-Create Blank Cross Sections...]] : Automatically connects boreholes with blank borehole cross sections.  
| [[GMS:Borehole_Cross_Sections|''Cross Section Editor...'']] || Brings up the ''Cross Section Editor'' dialog where one or multiple 2D cross sections between boreholes are filled.
; [[GMS:Horizons#Automatic_Assignment|Auto-Assign Horizons...]] : Automatically assigns horizon IDs to borehole contacts based on material ordering and adjacent boreholes.  
|-
; [[GMS:Borehole_Cross_Sections#Automatic_editing|Auto-Fill Blank Cross Sections...]] : Automatically fills all blank cross sections by connecting the contacts on one borehole to those on the other.  
| ''Lock All Boreholes'' || Turns off the ability to change the position (drag) of created boreholes.
; [[GMS:Horizons_to_Solids|Horizons → Solids...]] : Opens the [[GMS:Horizons Wizard|''Horizons to Solids'']] wizard which can be used to create [[GMS:Solid_Module|solids]] from a combination of boreholes, TINs and conceptual models.  
|-
; [[GMS:Horizons_to_3D_Mesh|Horizons → 3D Mesh...]] : Opens the [[GMS:Horizons Wizard|''Horizons to Mesh'']] wizard which can be used to create a [[GMS: 3D_Mesh_Module |3D mesh]] from a combination of boreholes, TINs and conceptual models.  
| [[GMS:Creating_and_Editing_Boreholes#Auto_Select|''Auto Select Contacts/Segments...'']] || When one contact or segment is selected, automatically selects matching contacts or segments on other boreholes.
; Horizons → UGrid : Opens the [[GMS:Horizons Wizard|''Horizons to UGrid'']] wizard which can be used to create a [[GMS:UGrid Module |UGrid]] from a combination of boreholes, TINs and conceptual models.
|-
<!--; Zoom To Extents : Frames the Graphics Window around the selected objects.-->
| [[GMS:Borehole_Cross_Sections#Automatic_creation|''Auto-Create Blank Cross Sections...'']] || Automatically connects boreholes with blank borehole cross sections.
; ''Advanced >'' :
|-
<blockquote style="margin-top:0px; margin-bottom:0px;">
| [[GMS:Horizons#Automatic_Assignment|''Auto-Assign Horizons...'']] || Automatically assigns horizon IDs to borehole contacts based on material ordering and adjacent boreholes.
; [[GMS:Borehole_Hydrogeologic_Units#Soils_->_HGUs, HGUs_->_Soils|HGUs &rarr; Soils]] : Copies the [[GMS:Borehole_Hydrogeologic_Units|HGU]] material IDs to the soil IDs, overwriting the existing soil IDs.  
|-
; [[GMS:Borehole_Hydrogeologic_Units#Soils_->_HGUs, HGUs_->_Soils|Soils &rarr; HGUs]] : Copies the soil material IDs to the [[GMS:Borehole_Hydrogeologic_Units|HGU]] IDs, overwriting the existing HGU IDs.  
| [[GMS:Borehole_Cross_Sections#Automatic_editing|''Auto-Fill Blank Cross Sections...'']] || Automatically fills all blank cross sections by connecting the contacts on one borehole to those on the other.
; [[GMS:Borehole_Cross_Sections#Automatic_creation|Snap Cross Sections to TIN...]] : Opens a dialog that allows snapping the top and/or bottom arcs of the cross sections to TINs.  
|-
; Snap Boreholes to TIN... : Opens a dialog that allows selecting a TIN. The selected boreholes (or all, if none are selected) are moved up or down in the Z direction such that their tops just touch the TIN surface. Multiple TINs can be selected. If a borehole can be snapped to more than one TIN, it will be snapped to whichever TIN is last.  
| [[GMS:Horizons_to_Solids|''Horizons &rarr; Solids...'']] || Opens the Horizons to Solids wizard which can be used to create [[GMS:Solid_Module|solids]] from a combination of boreholes, TINs and conceptual models.
; [[GMS:Converting_Borehole_Data|Add Contacts to TIN]] : Inserts a new vertex into the active TIN at the location of every selected borehole contact.  
|-
; Bounding 3D Grid... : Opens the [[GMS:Creating and Editing 3D Grids|''Create Finite Difference Grid'']] dialog with dimensions defaulted such that the new grid will surround all existing boreholes.  
| [[GMS:Horizons_to_3D_Mesh|''Horizons &rarr; 3D Mesh...'']] || Opens the Horizons to Mesh wizard which can be used to create a [[GMS: 3D_Mesh_Module |3D mesh]] from a combination of boreholes, TINs and conceptual models.
; [[GMS:Converting_Borehole_Data|Contacts &rarr; TIN]] : Creates a new TIN with vertices at the locations of the selected contacts.  
|-
; [[GMS:Converting_Borehole_Data|Contacts &rarr; 2D Scatter Points...]] : Creates a new 2D scatter point set with vertices at the locations of the selected contacts.  
| '''Advanced >''' ||
; [[GMS:Converting_Borehole_Data|Watertable &rarr; 2D Scatter Points...]] : Creates a new 2D scatter point set with vertices at the locations of the water table specified on each borehole.  
|-
; [[GMS:Converting_Borehole_Data|Sample Data &rarr; 3D Scatter Points...]] : Brings up the ''Sample Data &rarr; Scatter Points'' dialog that is used to create a 3D scatter point set from sample data.  
| [[GMS:Borehole_Hydrogeologic_Units#Soils_->_HGUs, HGUs_->_Soils|''HGUs &rarr; Soils'']] || Copies the [[GMS:Borehole_Hydrogeologic_Units|HGU]] material IDs to the soil IDs, overwriting the existing soil IDs.
; Sample Data &rarr; Stratigraphy : Opens the ''Sample Data &rarr; Stratigraphy'' dialog that allows defining stratigraphy (borehole contacts) based on the sample data.  
|-
; [[GMS:Horizons_to_HUF|Horizons &rarr; HUF]] : Opens the ''Horizons &rarr; HUF'' wizard to create [[GMS:HUF_Package|MODFLOW HUF]] data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.
| [[GMS:Borehole_Hydrogeologic_Units#Soils_->_HGUs, HGUs_->_Soils|''Soils &rarr; HGUs'']] || Copies the soil material IDs to the [[GMS:Borehole_Hydrogeologic_Units|HGU]] IDs, overwriting the existing HGU IDs.  
</blockquote>
|-
 
| [[GMS:Borehole_Cross_Sections#Automatic_creation|''Snap Cross Sections to TIN...'']] || Opens a dialog allowing the user to snap the top and/or bottom arcs of the cross sections to TINs.
==Related Topics==
|-
* [[GMS:Boreholes|Boreholes]]
| ''Snap Boreholes to TIN...'' || Opens a dialog allowing the user to pick a TIN. The selected boreholes (or all, if none are selected) are moved up or down in the Z direction such that their tops just touch the TIN surface. Multiple TINs can be selected. If a borehole can be snapped to more than one TIN, it will be snapped to whichever TIN is last.
|-
| [[GMS:Converting_Borehole_Data|''Add Contacts to TIN'']] || Inserts a new vertex into the active TIN at the location of every selected borehole contact.
|-
| ''Bounding 3D Grid...'' || Opens the ''Create Finite Difference Grid'' dialog with dimensions defaulted such that the new grid will surround all existing boreholes.
|-
| [[GMS:Converting_Borehole_Data|''Contacts &rarr; TIN'']] || Creates a new TIN with vertices at the locations of the selected contacts.
|-
| [[GMS:Converting_Borehole_Data|''Contacts &rarr; 2D Scatter Points...'']] || Creates a new 2D scatter point set with vertices at the locations of the selected contacts.
|-
| [[GMS:Converting_Borehole_Data|''Watertable &rarr; 2D Scatter Points...'']] || Creates a new 2D scatter point set with vertices at the locations of the water table specified on each borehole.
|-
| [[GMS:Converting_Borehole_Data|''Sample Data &rarr; 3D Scatter Points...'']] || Brings up the ''Sample Data &rarr; Scatter Points'' dialog that is used to create a 3D scatter point set from sample data.
|-
| ''Sample Data &rarr; Stratigraphy'' || Opens the ''Sample Data &rarr; Stratigraphy'' dialog allowing the user to define stratigraphy (borehole contacts) based on the sample data.
|-
| [[GMS:Horizons_to_HUF|''Horizons &rarr; HUF'']] || Opens the Horizons &rarr; HUF wizard to create [[GMS:HUF_Package|MODFLOW HUF]] data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.
|}




{{Navbox GMS}}
{{Navbox GMS}}
[[Category:Boreholes]]
[[Category:Boreholes|Com]]
[[Category:Menus]]
[[Category:GMS Menus]]

Latest revision as of 18:52, 29 March 2022

GMS Commands
Common
File
Edit
Display
Modules
TINs
Boreholes
Solids
Mesh (2D)
Grid (2D)
Scatter Points (2D)
Interpolation (2D and 3D)
Mesh (3D)
Grid (3D)
Scatter Points (3D)
Feature Objects
GIS
UGrid
Models
FEMWATER
MODAEM
MODFLOW
mod-PATH3DU
MODPATH
MT3DMS
SEAWAT
SEEP2D
T-PROGS
UTEXAS
v • e

When the Borehole module is active the Borehole menu become active. The menu has the following commands:

New Borehole
Creates a new Borehole.
Borehole Editor...
Opens the Borehole Editor.
Cross Section Editor...
Brings up the Cross Section Editor dialog where one or multiple 2D cross sections between boreholes are filled.
Lock All Boreholes
Turns off the ability to change the position (drag) of created boreholes.
Auto Select Contacts/Segments...
When one contact or segment is selected, automatically selects matching contacts or segments on other boreholes.
Auto-Create Blank Cross Sections...
Automatically connects boreholes with blank borehole cross sections.
Auto-Assign Horizons...
Automatically assigns horizon IDs to borehole contacts based on material ordering and adjacent boreholes.
Auto-Fill Blank Cross Sections...
Automatically fills all blank cross sections by connecting the contacts on one borehole to those on the other.
Horizons → Solids...
Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs and conceptual models.
Horizons → 3D Mesh...
Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs and conceptual models.
Horizons → UGrid
Opens the Horizons to UGrid wizard which can be used to create a UGrid from a combination of boreholes, TINs and conceptual models.
Advanced >
HGUs → Soils
Copies the HGU material IDs to the soil IDs, overwriting the existing soil IDs.
Soils → HGUs
Copies the soil material IDs to the HGU IDs, overwriting the existing HGU IDs.
Snap Cross Sections to TIN...
Opens a dialog that allows snapping the top and/or bottom arcs of the cross sections to TINs.
Snap Boreholes to TIN...
Opens a dialog that allows selecting a TIN. The selected boreholes (or all, if none are selected) are moved up or down in the Z direction such that their tops just touch the TIN surface. Multiple TINs can be selected. If a borehole can be snapped to more than one TIN, it will be snapped to whichever TIN is last.
Add Contacts to TIN
Inserts a new vertex into the active TIN at the location of every selected borehole contact.
Bounding 3D Grid...
Opens the Create Finite Difference Grid dialog with dimensions defaulted such that the new grid will surround all existing boreholes.
Contacts → TIN
Creates a new TIN with vertices at the locations of the selected contacts.
Contacts → 2D Scatter Points...
Creates a new 2D scatter point set with vertices at the locations of the selected contacts.
Watertable → 2D Scatter Points...
Creates a new 2D scatter point set with vertices at the locations of the water table specified on each borehole.
Sample Data → 3D Scatter Points...
Brings up the Sample Data → Scatter Points dialog that is used to create a 3D scatter point set from sample data.
Sample Data → Stratigraphy
Opens the Sample Data → Stratigraphy dialog that allows defining stratigraphy (borehole contacts) based on the sample data.
Horizons → HUF
Opens the Horizons → HUF wizard to create MODFLOW HUF data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.

Related Topics


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:Borehole_Commands&oldid=153956"