WMS:MODRAT Edit Parameters: Difference between revisions
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
If a subarea, reach, or relief drain is selected before issuing the '''Edit MODRAT Parameters''' command, then the data for that object is loaded for editing. When a hydrograph station is selected (subarea/reach/relief drain), only the items which correspond to the selected hydrograph station are active, all others are inactive. For example, when a subarea is selected, all items under the Basin Data heading are active and all items under the Reach Data heading are inactive. | If a subarea, reach, or relief drain is selected before issuing the '''Edit MODRAT Parameters''' command, then the data for that object is loaded for editing. When a hydrograph station is selected (subarea/reach/relief drain), only the items which correspond to the selected hydrograph station are active, all others are inactive. For example, when a subarea is selected, all items under the Basin Data heading are active and all items under the Reach Data heading are inactive. | ||
Once the 'Edit MODRAT Parameters'' dialog appears, it will remain open until the user selects the '''Done''' button. This enables the user to switch between basins, reaches, or relief drains quickly and define the necessary parameters without closing and opening the dialog for each hydrograph unit. | Once the ''Edit MODRAT Parameters'' dialog appears, it will remain open until the user selects the '''Done''' button. This enables the user to switch between basins, reaches, or relief drains quickly and define the necessary parameters without closing and opening the dialog for each hydrograph unit. | ||
Revision as of 22:10, 11 February 2013
Attributes or parameters for all MODRAT hydrograph stations are defined and/or edited using the Edit MODRAT Parameters dialog, shown below. This dialog is accessed by selecting the Edit MODRAT Parameters command from the MODRAT menu or by double-clicking on a basin, reach, or relief drain when MODRAT is the active model in WMS.
If a subarea, reach, or relief drain is selected before issuing the Edit MODRAT Parameters command, then the data for that object is loaded for editing. When a hydrograph station is selected (subarea/reach/relief drain), only the items which correspond to the selected hydrograph station are active, all others are inactive. For example, when a subarea is selected, all items under the Basin Data heading are active and all items under the Reach Data heading are inactive.
Once the Edit MODRAT Parameters dialog appears, it will remain open until the user selects the Done button. This enables the user to switch between basins, reaches, or relief drains quickly and define the necessary parameters without closing and opening the dialog for each hydrograph unit.
Related Topics
- Basin Data
- Reach Data
- Mapping Parameters from GIS Data Files
- Job Control Parameters
- Location
- Lateral
- Renumbering the Tree
- I/O
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
