SMS:ADH 2D Shallow Water Flow

Go to SMS:Models page

"ADH is a state-of-the-art ADaptive Hydraulics Modeling system developed by the Coastal and Hydraulics Laboratory (CHL), ERDC, USACE, and is capable of handling both saturated and unsaturated groundwater, overland flow, three-dimensional Navier-Stokes flow, and two- or three-dimensional shallow water problems." [1]

Information about the ADH model can be found at the ADaptive Hydraulics Modeling HomePage.

Functionality

Top of page

Graphical Interface

The model was initially included in the 9.2 version release and was overhauled for the 10.0 version release, however it is available only to the model developers. We are continuing to develop an interface to allow SMS users to utilize ADH for 2D shallow water flow and sediment transport analysis.

Files

An ADH simulation is defined using three main files: mesh geometry (*.3dm), boundary conditions (*.bc), and hot start conditions (*.hot). ADH expects a 3-dimensional mesh geometry since it can solve 3D models, but SMS will only interface the 2D capabilities and will therefore only read and write 2D entities in the *.3dm file. A generic SMS mesh geometry file (*.2dm) can be used by ADH if the extension is changed to *.3dm. To facilitate handling the ADH files, SMS creates a simulation file (*.sim) which lists the individual files. Opening the *.sim will load the ADH files in SMS.

Each file is a card based text file that can be viewed and edited by a text editor (i.e. Notepad).

• Mesh geometry file (*.2dm/*.3dm)
• Boundary condition file (*.bc)
• Hot start file (*.hot)
• Boat definition file (*.bt)

Dialogs

SMS provides the capability to view and edit model parameters via dialog boxes specific to the ADH interface. The following are descriptions of important windows accessible from the ADH menu and right-click menus.

• Model Control
• Boundary Condition Assignment
• Material Properties
• Hot Start Initial Conditions
• Model Check (currently unavailable - under development)
• Boundary Layers (currently unavailable - under development)
• Run Model

Top of page

Using the Model / Practical Notes

• ADH String Structures
• Sediment Transport and Bed Layers
• Time Series
• Wind Stations

Top of page

Case Studies / Sample Problems

The following ADH simulation files have been provided by CHL to test ADH and the SMS interface capabilities. Additional test cases will be posted here as the interface can successfully read, write, and run the ADH model from within SMS.

SMS 10.1 Development version using ADH rev #3669 dated August 2007:

• Bayou_Sorrel - Uses the NB OVL and NB OTW boundary condition cards. Includes two materials on a complex mesh.

• Pool5 - Uses the NB OVL and NB OTW boundary condition cards. Includes two inflows with one outflow and four materials on a complex mesh.

• nb dis - Tests the NB DIS boundary card on a straight flume.

• op bt - Tests the OP BT card which includes the vessel movement library. This test case contains a boat definition file (*.bt).

• db lde - Tests the DB LDE pressure lid card on a straight flume.

• db ldh - Tests the DB LDH pressure lid card on a straight flume.

• db lid - Tests the DB LID pressure lid card on a straight flume.

Go to SMS:Models page