SMS:TUFLOW Project Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 43: Line 43:
|-
|-
|width="800"|
|width="800"|
:# Create a SRH-2D Boundary Conditions coverage.
:# Create a TUFLOW 1D/2D BCs and Links coverage.
:# Assign boundary conditions to arcs.
:# Assign boundary conditions to arcs.
:#* Inlet Q (options).
:#* Exit-H (options, including new normal/critical depth tool).
:#* Internal inflows and outflows (highlight approach – hole in mesh).
:#* Monitoring Lines.
:#* Optional Wall boundary conditions.
:#* Structures (culverts, weirs, bridge pressure flow).
|}
|}


Revision as of 19:12, 2 July 2015

In general, to build a TUFLOW model in SMS, use the following steps:

3. Review and edit elevation data.
  1. Review and set object Projections.
  2. Remove erroneous points.
  3. Add breaklines.
  4. Merge datasets.
  5. Stamp new features (channel, roadway embankment, or other).
4. Define model limits (domain).
  1. Generate a Mesh Generator map coverage.
  2. Digitize arcs to define mesh limits.
  3. Define mesh density and type (in Mesh Generator coverage).
  4. Create arcs along key breaklines and notable features (banklines, structures, piers, road embankments, etc.).
  5. Set vertex spacing on arcs to define mesh element size.
  6. Specify mesh type for each polygon (pave / patch / none).
  7. Assign scatter data.
  8. Generate mesh.
5. Set-up boundary conditions.
  1. Create a TUFLOW 1D/2D BCs and Links coverage.
  2. Assign boundary conditions to arcs.
6. Define general material properties.
TUFLOW requires both general material data properters and TUFLOW specific materials.
  1. Open the Materials Data dialog.
  2. Add materials.
7. TUFLOW simulation setup.
  1. Create new simulation.
  2. Add components to simulation.
  3. Set up Model Control parameters.
  4. Check the model.
  5. Simulation execution.
  6. Troubleshooting.
8. Define TUFLOW material sets.
  1. Create new material set.
  2. Add define material properties.
9. Run TUFLOW.
  1. Check model simlation.
  2. Run TUFLOW.
10. Review results.
  1. Open _XMDF file.
  2. Results layers.
  3. Observation lines.
  4. Summary table.
  5. Run the Plot Wizard.
  6. Data calculator.
11. Compare datasets.
12. Data visualization.
v • e
SMS – Surface-water Modeling System
Modules:1D Grid  •   Cartesian Grid  •   Curvilinear Grid  •   GIS  •   Map  •   Mesh  •  Particle  •   Quadtree  •  Raster  •   Scatter   •   UGridSMS.png
General Models:3D Structure  •   FVCOM  •   Generic  •   PTM
Coastal Models:ADCIRC   •   BOUSS-2D  •   CGWAVE  •   CMS-Flow   •   CMS-Wave  •   GenCade  •   STWAVE  •   WAM
Riverine/Estuarine Models:AdH   •   HEC-RAS   •   HYDRO AS-2D   •   RMA2   •   RMA4   •   SRH-2D   •   TUFLOW   •   TUFLOW FV
Aquaveo   •   SMS Tutorials   •   SMS Workflows
Retrieved from "https://www.xmswiki.com/index.php?title=SMS:TUFLOW_Project_Workflow&oldid=88548"