WMS:Defining Roughness

Roughness values are determined for cross sections based on a set of material properties defined for the cross sections. Material properties are defined in a four step process.

1. Create a master set of materials (land use) types that define the possible choices to be found in the floodplain being modeled. Typically, users will want to define as many materials as will be defining manning's roughness values. This is done using the Materials command in the SMPDBK menu.

   

2. Create an Area Property Coverage that consists of polygons corresponding to the different land use (roughness) types found in the floodplain. After building the coverage, the user will need to define each polygon attribute by double-clicking on the polygon and assigning the appropriate roughness value. Generally these polygons will be a more generalized version of a land use map.

   

3. Define the manning's roughness values that correspond to each material property. This dialog is accessed from the SMPDBK menu using the Material Properties command.

   

4. Assign the created materials properties to the cross section database being used. This will make sure that properties mapped to the cross sections when cut from a digital terrain model have a roughness value assigned. This is done using the Model Control option in the SMPDBK menu.

   

When WMS writes the SMPDBK input file, average roughness values are computed based on the conveyance for the elevation/top-width increment.

Related Topics

• Simplified Dam-Break Analysis
• 1D-Hydraulic Centerline Coverage