WMS:Weighted Average Precipitation: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(9 intermediate revisions by the same user not shown)
Line 2: Line 2:


# Switch to the "Drainage Module".
# Switch to the "Drainage Module".
# Select the ''Select drainage unit or basin'' tool and double click on the watershed which you would like to assign precipitation based on rain gages.
# Select the '''Select drainage unit or basin''' tool and double-click on the watershed to assign precipitation based on rain gages.
# Select the '''Precipitation''' button.  
# Select the '''Precipitation''' button.  
# Select the ''Gage (PG)'' option. Select '''OK''', then '''Done'''.
# Select the ''Gage (PG)'' option. Select '''OK''', then '''Done'''.
# Right click on the ''Coverages'' folder and select '''New Coverage''' to create a new coverage.
# Right-click on the ''Coverages'' folder and select '''New Coverage''' to create a new coverage.
# Change the "Coverage type" to ''Rain Gage'' and select '''OK'''.
# Change the "Coverage type" to ''Rain Gage'' and select '''OK'''.
# Create your rain gages with the ''Create Feature Point'' tool (you can also add rain gages later on)
# Create the rain gages with the '''Create Feature Point''' tool. (Rain gages can also be added later on.)
# Right click on a rain gage with the ''Select Feature Point/Node'' tool and select '''Attributes''' (you can also double click on the gage).  The ''Rain Gage Properties'' window will appear.  You can now do the following (NOTE: make sure the Show combo box in the upper right is set to All in order to view all gages):
# Right-click on a rain gage with the '''Select Feature Point/Node''' tool and select '''Attributes''' (or double-click on the gage).  The ''Rain Gage Properties'' window will appear.  Now do the following ('''''NOTE:''''' make sure the ''Show'' combo box in the upper right is set to "All" in order to view all gages):
#*            Add additional gages with the '''Add Gage''' button
#*            Add additional gages with the '''Add Gage''' button
#*            Edit the X, Y coordinates of each gage  
#*            Edit the X, Y coordinates of each gage  
Line 15: Line 15:
# Select '''OK''' when finished adding rain gages.
# Select '''OK''' when finished adding rain gages.
# Switch to the ''Hydrologic Modeling Module''. Select the '''Select Basin''' button.
# Switch to the ''Hydrologic Modeling Module''. Select the '''Select Basin''' button.
# Double click on the basin.
# Double-click on the basin.
# Select the '''Precipitation''' button.
# Select the '''Precipitation''' button.
# Select the ''Gage (PG)'' option.  Select '''OK''' and then '''Done'''.
# Select the ''Gage (PG)'' option.  Select '''OK''' and then '''Done'''.
# Select '''HEC-1 | HEC-1 Rain Gages'''.
# Select ''HEC-1'' | '''HEC-1 Rain Gages'''.
# Select the rain gage coverage in the ''Coverage:'' combo box.  Select '''OK'''.
# Select the rain gage coverage in the ''Coverage:'' combo box.  Select '''OK'''.
# Select '''DEM | Compute Basin Data''' while in the ''Drainage Module''.  Enter a ''Gage weight computation cell size'' and the select '''OK'''.
# Select ''DEM ''| '''Compute Basin Data''' while in the ''Drainage Module''.  Enter a ''Gage weight computation cell size'' and the select '''OK'''.
 
==Related Topics==
* [[WMS:Rain Gage|Rain Gage]]
 


{{WMSMain}}
{{WMSMain}}
[[Category:HEC-1|W]]

Latest revision as of 17:50, 10 October 2017

Once a watershed has been delineated, follow the steps below to use rain gage data to compute a basin average precipitation with HEC-1.

  1. Switch to the "Drainage Module".
  2. Select the Select drainage unit or basin tool and double-click on the watershed to assign precipitation based on rain gages.
  3. Select the Precipitation button.
  4. Select the Gage (PG) option. Select OK, then Done.
  5. Right-click on the Coverages folder and select New Coverage to create a new coverage.
  6. Change the "Coverage type" to Rain Gage and select OK.
  7. Create the rain gages with the Create Feature Point tool. (Rain gages can also be added later on.)
  8. Right-click on a rain gage with the Select Feature Point/Node tool and select Attributes (or double-click on the gage). The Rain Gage Properties window will appear. Now do the following (NOTE: make sure the Show combo box in the upper right is set to "All" in order to view all gages):
    • Add additional gages with the Add Gage button
    • Edit the X, Y coordinates of each gage
    • Enter the amount of precipitation at each gage
    • Assign a temporal distribution to each gage by activating the Temporal distribution check box and selecting Define.
  9. Select OK when finished adding rain gages.
  10. Switch to the Hydrologic Modeling Module. Select the Select Basin button.
  11. Double-click on the basin.
  12. Select the Precipitation button.
  13. Select the Gage (PG) option. Select OK and then Done.
  14. Select HEC-1 | HEC-1 Rain Gages.
  15. Select the rain gage coverage in the Coverage: combo box. Select OK.
  16. Select DEM | Compute Basin Data while in the Drainage Module. Enter a Gage weight computation cell size and the select OK.

Related Topics


v • e
WMS – Watershed Modeling System
Modules:Terrain Data  •   Drainage  •   Map  •   Hydrologic Modeling  •   River  •   GIS  •   2D Grid  •   2D ScatterWMS.PNG
Models:CE-QUAL-W2  •   GSSHA  •   HEC-1  •   HEC-HMS  •   HEC-RAS  •   HSPF  •   MODRAT  •   NSS  •   OC Hydrograph  •   OC Rational  •   Rational  •   River Tools  •   Storm Drain  •   SMPDBK  •   SWMM  •   TR-20  •   TR-55
Toolbars:Modules  •   Macros  •   Units   •   Digitize  •   Static Tools  •   Dynamic Tools  •   Drawing  •   Get Data Tools
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=WMS:Weighted_Average_Precipitation&oldid=130509"