WMS:Project Explorer Contents for Hydrologic Modeling Module: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(32 intermediate revisions by 3 users not shown)
Line 1: Line 1:
In the hydrologic modeling module the Project Explorer displays the identical structure as the topologic tree providing an alternate hierarchical view of the hydrologic model (diversions are not displayed in the Project Explorer). A check box controlling the display of an entire folder (model) and outlet points is displayed to the left of the icon.  If unchecking an outlet then the display of that outlet, it's basins and everything "upstream" of the outlet will not be displayed in the tree display of the graphics window.
In the hydrologic modeling module the Project Explorer displays the identical structure as the topologic tree providing an alternate hierarchical view of the hydrologic model (diversions are not displayed in the Project Explorer). A check box controlling the display of an entire folder (model) and outlet points is displayed to the left of the icon.  If unchecking an outlet then the display of that outlet, it's basins and everything "upstream" of the outlet will not be displayed in the tree display of the graphics window.


:[[Image:WMS_HydrologicProjectExplorer1.png]]


[[Image:WMSImage205.gif]]


Right-clicking on the main Hydrologic Tree Data folder [[File:Hydrologic Module Folder.svg|16 px]] allows creating a new folder (at this point a topologic tree for hydrologic model cannot be created directly from the Project Explorer).


Right-clicking on the main Hydrologic Tree Data folder allows users to create a New folder (at this point a topologic tree for hydrologic model cannot be created directly from the Project Explorer).
:[[Image:WMS_HydrologicProjectExplorer2.png]]


Right-clicking on the Hydrologic Modeling Tree object [[File:Hydrologic Module Icon.svg|15 px]] will bring up a menu with commands for the current hydrologic model.


[[Image:WMSImage206.gif]]
:[[Image:WMS_HydrologicProjectExplorer3.png|thumb]]


*'''Job Control''': Brings up the ''HEC-1 Job Control'' dialog.
*'''Display Options''':  Brings up the [[WMS:Display Options|''Display Options'']] dialog.
*'''Open HEC-1 File''': Brings up the ''Open'' dialog.
*'''Check Simulation''': Brings up the ''HEC-1 Model Check'' dialog to check for potential problems with your HEC-1 model.
*'''Run Simulation''': Brings up the ''HEC-1 Run Options'' dialog.
*'''Read Solution''': 
*'''Edit Parameters''': Brings up the ''Edit HEC-1 Parameters'' dialog.
*'''HEC-1 Rain Gages''': Brings up the ''Rain Gage Properties'' dialog.
*'''Properties''':
*'''Stochastic Modeling''':
*'''Run Stochastic Model''':
*''Add'':
**'''Outlet''':
**'''Basin''':
*'''Rename''': Lets the name of the tree be changed in the Project Explorer.
*'''Find''': Brings up the ''Enter a Search String'' dialog to search in the tree.
*'''Rebuild Tree Display''':
*'''Zoom To Tree''':  Will resize the Tree data so it fills the Graphics Window.


Right-clicking on a basin or outlet icon allows users to '''Rename''' that basin (remember that HEC-1 names should be six characters or less) or '''Edit Parameters''' for the currently active model. Selecting a basin or outlet will cause it to be selected in the topologic tree of the graphics window.
Right-clicking on a basin [[File:Drainage Module Icon.svg|16 px]] or outlet [[File:HydrologicStationData.svg|16 px]] icon gives the option to '''Rename''' that basin (remember that HEC-1 names should be six characters or less) or '''Edit Parameters''' for the currently active model. Selecting a basin or outlet will cause it to be selected in the topologic tree of the graphics window.


:[[Image:WMS_HydrologicProjectExplorer4.png]]


[[Image:WMSImage207.gif]]
 
==Related Topic==
* [[WMS:Hydrologic Modeling Module|Hydrologic Modeling Module]]
* [[WMS:Project Explorer Overview|Project Explorer Overview]]




Line 20: Line 44:


[[Category:Hydrologic Modeling|P]]
[[Category:Hydrologic Modeling|P]]
[[Category:Project Explorer|Hydrologic]]
[[Category:WMS Menus]]
[[Category:Needs Update]]

Latest revision as of 20:11, 26 December 2019

In the hydrologic modeling module the Project Explorer displays the identical structure as the topologic tree providing an alternate hierarchical view of the hydrologic model (diversions are not displayed in the Project Explorer). A check box controlling the display of an entire folder (model) and outlet points is displayed to the left of the icon. If unchecking an outlet then the display of that outlet, it's basins and everything "upstream" of the outlet will not be displayed in the tree display of the graphics window.

WMS HydrologicProjectExplorer1.png


Right-clicking on the main Hydrologic Tree Data folder Hydrologic Module Folder.svg allows creating a new folder (at this point a topologic tree for hydrologic model cannot be created directly from the Project Explorer).

WMS HydrologicProjectExplorer2.png

Right-clicking on the Hydrologic Modeling Tree object Hydrologic Module Icon.svg will bring up a menu with commands for the current hydrologic model.

WMS HydrologicProjectExplorer3.png
  • Job Control: Brings up the HEC-1 Job Control dialog.
  • Display Options: Brings up the Display Options dialog.
  • Open HEC-1 File: Brings up the Open dialog.
  • Check Simulation: Brings up the HEC-1 Model Check dialog to check for potential problems with your HEC-1 model.
  • Run Simulation: Brings up the HEC-1 Run Options dialog.
  • Read Solution:
  • Edit Parameters: Brings up the Edit HEC-1 Parameters dialog.
  • HEC-1 Rain Gages: Brings up the Rain Gage Properties dialog.
  • Properties:
  • Stochastic Modeling:
  • Run Stochastic Model:
  • Add:
    • Outlet:
    • Basin:
  • Rename: Lets the name of the tree be changed in the Project Explorer.
  • Find: Brings up the Enter a Search String dialog to search in the tree.
  • Rebuild Tree Display:
  • Zoom To Tree: Will resize the Tree data so it fills the Graphics Window.

Right-clicking on a basin Drainage Module Icon.svg or outlet HydrologicStationData.svg icon gives the option to Rename that basin (remember that HEC-1 names should be six characters or less) or Edit Parameters for the currently active model. Selecting a basin or outlet will cause it to be selected in the topologic tree of the graphics window.

WMS HydrologicProjectExplorer4.png


Related Topic