SMS:FESWMS Attributes Dialog: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 18: Line 18:
** ''FESWMS BC Nodes'' – FESWMS allows specifying boundary conditions on a nodal basis although it is generally preferable to use boundary conditions on [[SMS:FESWMS BC Nodestrings|nodestrings]].  Please refer to the FESWMS manual for information on the nodal boundary condition options.
** ''FESWMS BC Nodes'' – FESWMS allows specifying boundary conditions on a nodal basis although it is generally preferable to use boundary conditions on [[SMS:FESWMS BC Nodestrings|nodestrings]].  Please refer to the FESWMS manual for information on the nodal boundary condition options.


== Options Frame ==
=== Options Frame ===
* Refine point (checked = on)
* Refine point (checked = on)
** Element size – Specify the nodal spacing, or element edge length in the vicinity of the refine point. Refine points are only used if the mesh is generated using the [[SMS:Paving|Paving]] or [[SMS:Paving#Scalar Paving Density|Scalar Paving Density]] mesh generation methods.
** Element size – Specify the nodal spacing, or element edge length in the vicinity of the refine point. Refine points are only used if the mesh is generated using the [[SMS:Paving|Paving]] or [[SMS:Paving#Scalar Paving Density|Scalar Paving Density]] mesh generation methods.


== Related Topics ==
== Related Topics ==

Revision as of 15:35, 5 September 2017

The FESWMS map coverage allows attributes to be set for arcs and points.

FESWMS Arc Attributes Dialog

FESWMS Feature Arc Attributes dialog

The FESWMS Feature Arc Attributes dialog is used to set the attributes for feature arcs. Attributes that can be specified for each feature arc include:

FESWMS Point Attributes Dialog

FESWMS Feature Point/Node Attributes dialog

The FESWMS Feature Point/Node Attributes dialog is used to set the attributes for a feature point / refine point represented by a feature point in a 2D mesh model coverage. Attributes that can be specified for each feature point / refine point include:

Attribute Type Frame

  • None
  • Boundary Conditions – Options button opens the FESWMS Nodal Boundary Conditions dialog.
    • FESWMS BC Nodes – FESWMS allows specifying boundary conditions on a nodal basis although it is generally preferable to use boundary conditions on nodestrings. Please refer to the FESWMS manual for information on the nodal boundary condition options.

Options Frame

  • Refine point (checked = on)
    • Element size – Specify the nodal spacing, or element edge length in the vicinity of the refine point. Refine points are only used if the mesh is generated using the Paving or Scalar Paving Density mesh generation methods.

Related Topics